脚本清单
执行develop后常用的脚本清单如表A-1，具体执行develop的命令请参见develop命令（develop）。
脚本名 |
目录名称 |
用途 |
|---|---|---|
acount_backup.sh |
/usr/local/scripts |
监控shadow文件变化 |
changepwd.sh |
/usr/local/scripts |
修改密码 |
check_backup.sh |
/usr/local/scripts |
监控备份/etc备份文件个数 |
check_env_mem.sh |
/usr/local/scripts |
修改系统使用内存大小 |
early_init.sh |
/usr/local/scripts |
加载驱动ko |
enable_secureboot.sh |
/usr/local/scripts |
使能安全启动 |
etc_backup.sh |
/usr/local/scripts |
备份/etc目录下的文件 |
etc_resume.sh |
/usr/local/scripts |
恢复/etc目录下的备件文件 |
eth_backup.sh |
/usr/local/scripts |
监控网口配置变化 |
ibma_edge_start.sh |
/usr/local/scripts |
用户ibma_edga的启动和配置 |
monitor_mem_cache.sh |
/usr/local/scripts |
监控并释放cache |
loopback_check.sh |
/usr/local/scripts |
网卡状态检测 |
network_test.sh |
/usr/local/scripts |
显示网卡信息 |
ntp_service.sh |
/usr/local/scripts |
启动NTP服务 |
parted.sh |
/usr/local/scripts |
恢复出厂设置 |
passwd_check.sh |
/usr/local/scripts |
检查密码 |
platform_init.sh |
/usr/local/scripts |
启动其他服务 |
start_nginx.sh |
/usr/local/scripts |
nginx的启动和配置 |
upgrade.sh |
/usr/local/scripts |
固件升级 |
usermod.sh |
/usr/local/scripts |
修改用户登录属性 |
uboot_region.sh |
/usr/local/scripts |
设置bios启动区 |
clr_uboot_env.sh |
/usr/local/scripts |
清除bios环境变量 |
