华为采用机器翻译与人工审校相结合的方式将此文档翻译成不同语言，希望能帮助您更容易理解此文档的内容。 请注意：即使是最好的机器翻译，其准确度也不及专业翻译人员的水平。 华为对于翻译的准确性不承担任何责任，并建议您参考英文文档（已提供链接）。
- 前言
如何使用命令行- 基础配置命令
- 熟悉命令行命令
- 首次登录系统命令
- 配置用户界面命令
- acl（用户界面视图）
- authentication-mode（用户界面视图）
- auto-execute command
- databits
- display mib-index interface
- display user-interface
- display user-interface maximum-vty
- display users
- display vty lines
- display vty mode
- free user-interface
- history-command max-size
- idle-timeout
- mmi-mode enable
- parity
- protocol inbound
- screen-length
- screen-width
- set authentication password
- set password min-length
- shell
- speed（用户界面视图）
- stopbits
- user privilege
- user-interface
- user-interface current
- user-interface maximum-vty
- 配置用户登录命令
- config lock
- config unlock interval
- display config lock
- display rsa local-key-pair public
- display rsa peer-public-key
- display ssh server
- display ssh user-information
- display telnet server status
- display telnet-client
- display ecc local-key-pair public
- display ecc peer-public-key
- ecc local-key-pair create
- ecc local-key-pair destroy
- ecc peer-public-key
- lock
- matched upper-view
- peer-public-key end
- public-key-code begin
- public-key-code end
- rsa local-key-pair create
- rsa local-key-pair destroy
- rsa peer-public-key
- send
- ssh client assign
- ssh client first-time enable
- ssh client key-exchange
- ssh client secure-algorithms hmac
- ssh client secure-algorithms cipher
- ssh client rekey time
- ssh server authentication-retries
- ssh server compatible-ssh1x enable
- ssh server key-exchange
- ssh server permit interface
- ssh server port
- ssh server rekey time
- ssh server rekey-interval
- ssh server secure-algorithms hmac
- ssh server secure-algorithms cipher
- ssh server timeout
- ssh server-source
- ssh user assign
- ssh user authentication-type
- stelnet
- stelnet ap
- stelnet server enable
- telnet
- telnet client-source
- telnet server permit interface
- telnet server port
- telnet server enable
- telnet server-source
- 文件管理命令
- ascii
- binary
- bye
- cd（FTP客户端视图）
- cd（SFTP客户端视图）
- cd（用户视图）
- cdup（SFTP客户端视图）
- cdup（FTP客户端视图）
- close
- copy
- debugging
- delete（用户视图）
- dir（用户视图）
- delete（FTP客户端视图）
- dir/ls（FTP客户端视图）
- dir/ls（SFTP客户端视图）
- disconnect
- display flash recover mode
- display ftp-server
- display ftp-users
- display ftp-client
- display sftp-client
- display tftp-client
- execute
- file prompt
- flash recover mode
- format
- ftp
- ftp acl
- ftp client-source
- ftp server enable
- ftp server permit interface
- ftp server port
- ftp server-source
- ftp timeout
- get（FTP客户端视图）
- get（SFTP客户端视图）
- help（SFTP客户端视图）
- mkdir（FTP客户端视图）
- mkdir（SFTP客户端视图）
- mkdir（用户视图）
- lcd
- more
- mount
- move
- open
- passive
- put（FTP客户端视图）
- put（SFTP客户端视图）
- pwd（FTP客户端视图）
- pwd（SFTP客户端视图）
- pwd（用户视图）
- quit (FTP客户端视图)
- quit (SFTP客户端视图)
- remotehelp
- remove（SFTP客户端视图）
- rename（SFTP客户端视图）
- rename（用户视图）
- reset recycle-bin
- rmdir（FTP客户端视图）
- rmdir（SFTP客户端视图）
- rmdir（用户视图）
- set default ftp-directory
- sftp
- sftp ap
- sftp client-source
- sftp server enable
- tftp
- tftp client-source
- tftp-server acl
- umount
- undelete
- unzip
- user
- verbose
- zip
- 配置系统启动命令
- autosave interval
- autosave time
- compare configuration
- display autosave configuration
- display current-configuration
- display reset-reason
- display saved-configuration
- display schedule reboot
- display startup
- reset saved-configuration
- reboot
- reset factory-configuration
- startup patch
- reset patch-configure
- save
- schedule reboot
- startup saved-configuration
- startup system-software
- 设备升级命令
- ac issu system-software
- ap-reconnect
- display ac issu check-list system-software
- display ap wait reconnect list
- display license
- display license esn
- display license resource usage
- display license revoke-ticket
- display license state
- display paf
- display patch-information
- license active
- license emergency
- license revoke
- patch delete all
- patch load
- HTTP服务器命令
- 插件管理命令
- AC云化管理配置命令
- ac-mode
- certificate identity
- cloud-mng controller
- cloud-mng register-center disable
- display ac-mode
- display alarm active-to-cloud
- display alarm active-to-cloud sync-record
- display cloud-mng info
- display cloud-mng register-center status
- display cloud license
- display pnp configuration
- display pnp run-info
- lldp tlv-enable legacy-tlv pnp
- pnp startup-link-aggregation enable
- pnp startup-vlan
- pnp startup-vlan receive enable
- pnp startup-vlan send enable
- pki-load general-certificate
- 设备管理命令
- 查看设备状态的命令
- display cpu-usage
- display cpu-usage configuration
- display cpu-usage history
- display device
- display diagnostic-information
- display elabel
- display esn
- display sn
- display fan
- display health
- display memory-usage
- display memory-usage threshold
- display power
- display power system
- display temperature
- display transceiver
- display transceiver diagnosis interface
- display version
- reset cpu-usage record
- 硬件配置命令
- 节能配置命令
- 故障管理命令
- alarm correlation-suppress enable
- alarm-name severity
- alarm（系统视图）
- clear alarm active
- clear event all
- correlation-analyze enable
- display alarm active
- display alarm history
- display alarm information
- display event
- display event information
- delay-suppression enable
- event
- mask interface
- suppression alarm-name
- suppression event-name
- 信息中心配置命令
- display binlog-buffer
- display binlog-buffer summary
- display channel
- display debugging
- display info-center
- display info-center filter-id
- display info-center logfile path
- display info-center rate-limit record
- display info-center rate-limit threshold
- display info-center statistics
- display log
- display log failure
- display logbuffer
- display logfile
- display trapbuffer
- info-center channel
- info-center channel name
- info-center enable
- info-center filter-id
- info-center logbuffer
- info-center logbuffer size
- info-center logfile path
- info-center logfile size
- info-center loghost
- info-center loghost source
- info-center loghost source-port
- info-center max-logfile-number
- info-center rate-limit except
- info-center rate-limit global-threshold
- info-center rate-limit monitor-period
- info-center rate-limit threshold
- info-center source channel
- info-center statistic-suppress enable
- info-center timestamp
- info-center trapbuffer
- info-center trapbuffer size
- reset info-center statistics
- reset logbuffer
- reset trapbuffer
- save logfile
- terminal debugging
- terminal logging
- terminal monitor
- terminal trapping
- NTP配置命令
- display ntp-service sessions
- display ntp-service status
- display ntp-service trace
- ntp-service access
- ntp-service access limited
- ntp-service authentication enable
- ntp-service authentication-keyid
- ntp-service broadcast-client
- ntp-service broadcast-server
- ntp-service discard
- ntp-service enable
- ntp-service in-interface disable
- ntp-service kod-enable
- ntp-service max-dynamic-sessions
- ntp-service manycast-client
- ntp-service manycast-server
- ntp-service multicast-client
- ntp-service multicast-server
- ntp-service refclock-master
- ntp-service reliable authentication-keyid
- ntp-service server disable
- ntp-service source-interface
- ntp-service unicast-peer
- ntp-service unicast-server
- 接口管理命令
- 接口基础配置命令
- bandwidth(接口视图)
- description（接口视图）
- display default-parameter interface
- display interface
- display interface brief
- display interface description
- display interface counters
- display ip interface
- display ip interface description
- display this interface
- interface
- reset counters if-mib interface
- reset counters interface
- restart（接口视图）
- set flow-stat interval（接口视图）
- shutdown（接口视图）
- shutdown interval
- 以太网接口配置命令
- am isolate
- auto duplex
- auto speed
- combo-port
- display interface ethernet brief
- display port-group
- display port-isolate group
- duplex
- flow-control（接口视图）
- flow-control negotiation
- group-member
- interface range
- jumboframe enable
- log-threshold
- loopback
- mdi
- management-plane isolate enable
- management-port isolate enable
- negotiation auto
- port-down holdoff-timer
- port-group
- port-group group-member
- port-isolate enable
- port-isolate mode
- reset statistics-peak
- set device port-config-mode xge-port enable
- set flow-statistics include-interframe
- speed
- trap-threshold
- virtual-cable-test
- 逻辑接口配置命令
- 网络互通配置命令
- MAC表配置命令
- display loop-detect eth-loop
- display bridge mac-address
- display mac-address
- display mac-address aging-time
- display mac-address blackhole
- display mac-address dynamic
- display mac-address security
- display mac-address static
- display mac-address sticky
- display mac-address summary
- display mac-address total-number
- display mac-limit
- loop-detect eth-loop
- mac-address
- mac-address aging-time
- mac-address learning disable
- mac-learning priority
- mac-learning priority allow-flapping
- mac-limit
- port bridge enable
- port-security aging-time
- port-security enable
- port-security mac-address sticky
- port-security max-mac-num
- port-security protect-action
- reset loop-detect eth-loop
- 以太网链路聚合配置命令
- display eth-trunk
- display interface eth-trunk
- display lacp brief
- display lacp error packet
- display lacp statistics eth-trunk
- display trunk index-map
- display trunk resource
- display trunkmembership eth-trunk
- display trunkfwdtbl eth-trunk
- eth-trunk
- interface eth-trunk
- lacp collector delay
- lacp preempt delay
- lacp preempt enable
- lacp priority
- lacp priority-command-mode
- lacp selected
- lacp system-priority
- lacp src-mac
- lacp timeout
- least active-linknumber
- load-balance
- max active-linknumber
- mode
- reset lacp error packet statistics
- reset lacp statistics eth-trunk
- trunkport
- trunk member-port-inspect
- trunk-member trap
- VLAN配置命令
- access-vlan
- aggregate-vlan
- damping time
- description（VLAN视图）
- description（VLANIF接口视图）
- display interface vlanif
- display port vlan
- display sub-vlan
- display super-vlan
- display vlan
- interface vlanif
- ip pool（VLAN视图）
- management-vlan
- mtu（VLANIF接口视图）
- name（VLAN视图）
- port
- port default vlan
- port hybrid pvid vlan
- port hybrid tagged vlan
- port hybrid untagged vlan
- port link-type
- port trunk allow-pass vlan
- port trunk pvid vlan
- shutdown（VLANIF接口视图）
- vlan
- vlan vlan-name
- STP/RSTP/MSTP配置命令
- active region-configuration
- check region-configuration
- display stp
- display stp abnormal-interface
- display stp active
- display stp bridge
- display stp error packet
- display stp global
- display stp region-configuration
- display stp tc-bpdu statistics
- display stp topology-change
- display stp vlan
- instance
- max bandwidth-affected-linknumber
- region-name
- reset stp error packet statistics
- reset stp statistics
- revision-level
- stp bpdu-filter
- stp bpdu-filter default
- stp bpdu-protection
- stp bridge-diameter
- stp compliance
- stp config-digest-snoop
- stp converge
- stp cost
- stp edged-port
- stp edged-port default
- stp enable
- stp loop-protection
- stp max-hops
- stp mcheck
- stp mode（系统视图）
- stp no-agreement-check
- stp pathcost-standard
- stp point-to-point
- stp port priority
- stp priority
- stp region-configuration
- stp root
- stp root-protection
- stp tc-protection
- stp tc-protection interval
- stp tc-protection threshold
- stp timer forward-delay
- stp timer hello
- stp timer max-age
- stp timer-factor
- stp transmit-limit（接口视图）
- stp transmit-limit（系统视图）
- vlan-mapping modulo
- IPv4配置命令
- ARP配置命令
- arp detect-mode unicast
- arp detect-times
- arp expire-time
- arp static
- arp topology-change disable
- arp-ping ip
- arp-ping mac
- arp-proxy enable
- arp-proxy inner-sub-vlan-proxy enable
- arp-proxy inter-sub-vlan-proxy enable
- arp send-packet
- arp-suppress enable
- display arp
- display arp dynamic
- display arp error packet
- display arp interface
- display arp ip-conflict track
- display arp network
- display arp packet statistics
- display arp static
- display arp statistics
- display arp track
- display snmp-agent trap feature-name arp all
- l2-topology detect enable
- reset arp
- reset arp packet statistics
- snmp-agent trap enable feature-name arp
- DHCP配置命令
- alarm ip-used percentage
- bootfile
- conflict auto-recycle interval
- dhcp anti-attack check duplicate option
- dhcp client class-id（接口视图）
- dhcp client class-id（系统视图）
- dhcp client client-id
- dhcp client expected-lease
- dhcp client gateway-detect
- dhcp client default-route preference
- dhcp client hostname
- dhcp client renew
- dhcp client request option-list exclude
- dhcp client request option-list
- dhcp enable
- dhcp option template
- dhcp relay gateway-switch enable
- dhcp relay information enable
- dhcp relay information strategy
- dhcp relay release
- dhcp relay request server-match enable
- dhcp relay reply forward all enable
- dhcp relay server-ip
- dhcp relay server-select
- dhcp relay trust option82
- dhcp proxy timeout
- dhcp set ttl
- dhcp select global
- dhcp select interface
- dhcp server alarm ip-used percentage
- dhcp select relay
- dhcp server bootfile
- dhcp server bootp
- dhcp server bootp automatic
- dhcp server conflict auto-recycle interval
- dhcp server database
- dhcp server dns-list
- dhcp server domain-name（接口视图）
- dhcp server excluded-ip-address
- dhcp server gateway-list
- dhcp server force insert option
- dhcp server force response
- dhcp server group
- dhcp server ip-range
- dhcp server lease
- dhcp server logging
- dhcp server mask
- dhcp server nbns-list
- dhcp server netbios-type
- dhcp server next-server
- dhcp server option
- dhcp server option121
- dhcp server option184
- dhcp server ping
- dhcp server sip-server
- dhcp server sname
- dhcp server static-bind
- dhcp server trust option82
- dhcp speed-limit auto
- dhcp-server
- display dhcp client
- display dhcp client statistics
- display dhcp configuration
- display dhcp option template
- display dhcp proxy user-table
- display dhcp relay
- display dhcp relay statistics
- display dhcp relay user-table
- display dhcp server database
- display dhcp server configuration
- display dhcp server group
- display dhcp server statistics
- display dhcp statistics
- display ip pool
- display snmp-agent trap feature-name dhcp all
- dns-list
- domain-name
- excluded-ip-address
- force insert option
- gateway（DHCP服务器组视图）
- gateway-list
- ip pool（系统视图）
- ip relay address cycle
- ip route dhcp
- ip address bootp-alloc
- ip address dhcp-alloc
- lease
- lock（IP地址池视图）
- logging（IP地址池视图）
- nbns-list
- netbios-type
- network（IP地址池视图）
- next-server
- option
- option121
- option184
- reset dhcp client statistics
- reset dhcp proxy user-table
- reset dhcp relay statistics
- reset dhcp server statistics
- dhcp relay detect enable
- reset dhcp statistics
- reset ip pool
- section（IP地址池视图）
- sip-server（IP地址池视图）
- sname
- snmp-agent trap enable feature-name dhcp
- static-bind
- DNS配置命令
- display dns configuration
- display dns domain
- display dns dynamic-host
- display dns forward table
- display dns server
- display dns statistics
- display dns zone
- display ip host
- dns application cache ttl
- dns domain
- dns forward retry-number
- dns forward retry-timeout
- dns proxy enable
- dns proxy forward-any-response
- dns resolve
- dns server
- dns server source-ip
- dns-server-select-algorithm
- dns zone
- ip host
- reset dns dynamic-host
- reset dns forward table
- reset dns statistics
- rr a
- rr aaaa
- ttl
- mDNS网关配置命令
- display mdns policy
- display mdns gateway
- display mdns gateway statistics
- display mdns group
- display mdns service
- mac-address location-type
- mdns policy enable
- mdns policy service-provider
- mdns policy service-type
- mdns unicast-reply enable
- mdns gateway enable
- mdns gateway max service response
- mdns group
- mdns probe interval
- mdns permit service-type
- mdns source ip
- mdns whitelist source-ip
- reset mdns gateway statistics
- service-vlan
- user-vlan（mDNS组视图）
- service-type
- NAT配置命令
- display app-inspect table statistics
- display app-inspect session table
- display nat address-group
- display nat alg
- display nat dns-map
- display nat filter-mode
- display nat log configuration
- display nat mapping table
- display nat mapping-mode
- display nat outbound
- display nat server
- display nat session
- display nat session aging-time
- display nat static
- display nat static interface enable
- display port-mapping
- nat address-group
- nat alg
- nat dns-map
- nat filter-mode
- nat log binary-log host
- nat log session enable
- nat log session log-interval
- nat mapping-mode
- nat outbound
- nat outbound （Easy-IP）
- nat server
- nat session aging-time
- nat static enable
- nat static(接口视图)
- nat static(系统视图)
- port-mapping
- reset app-inspect table statistics
- reset nat session
- reset session all
- IP性能配置命令
- clear ip df
- discard ra
- discard rr
- discard srr
- discard ts
- display icmp statistics
- display ip interface
- display ip socket
- display ip socket register-port
- display ip socket vcpu
- display ip statistics
- display network status
- display rawip statistics
- display snmp-agent trap feature-name tcp all
- display tcp statistics
- display tcp status
- display udp statistics
- icmp blackhole unreachable send
- icmp host-unreachable send（接口视图）
- icmp port-unreachable send
- icmp receive
- icmp redirect send
- icmp ttl-exceeded drop
- icmp ttl-exceeded send
- icmp unreachable drop
- icmp with-options drop
- icmp-reply fast
- ip forward-broadcast
- ip soft-forward enhancement disable
- ip verify source-address
- reset ip socket monitor
- reset ip socket pktsort
- reset ip statistics
- reset rawip statistics
- reset tcp statistics
- reset udp statistics
- set priority
- snmp-agent trap enable feature-name tcp
- tcp adjust-mss
- tcp max-mss
- tcp min-mss
- tcp timer fin-timeout
- tcp timer syn-timeout
- tcp window
- IPv6基础配置命令
- display default-parameter tcp6
- display icmpv6 statistics
- display ipv6 address-policy
- display ipv6 attack-source overlapping-fragment
- display ipv6 interface
- display ipv6 interface tunnel
- display ipv6 neighbors
- display ipv6 pathmtu
- display ipv6 socket
- display ipv6 socket vcpu
- display ipv6 statistics
- display rawip ipv6 statistics
- display tcp ipv6 authentication-statistics
- display tcp ipv6 statistics
- display tcp ipv6 status
- display this ipv6 interface
- display udp ipv6 statistics
- ipv6
- ipv6 address
- ipv6 address anycast
- ipv6 address auto global
- ipv6 address auto link-local
- ipv6 address eui-64
- ipv6 address link-local
- ipv6 address-policy
- ipv6 enable (接口视图)
- ipv6 icmp redirect send
- ipv6 icmp-error
- ipv6 icmp port-unreachable send
- ipv6 icmp hop-limit-exceeded send
- ipv6 icmp receive
- ipv6 icmp send
- ipv6 icmp too-big-rate-limit
- ipv6 mtu
- ipv6 nd autoconfig managed-address-flag
- ipv6 nd autoconfig other-flag
- ipv6 nd dad attempts
- ipv6 nd hop-limit
- ipv6 nd learning strict
- ipv6 nd neighbor-limit
- ipv6 nd ns retrans-timer
- ipv6 nd nud reachable-time
- ipv6 nd ra
- ipv6 nd ra halt
- ipv6 nd ra hop-limit
- ipv6 nd ra preference
- ipv6 nd ra prefix
- ipv6 nd ra route-information
- ipv6 nd ra router-lifetime
- ipv6 nd stale-timeout
- ipv6 neighbor
- ipv6 pathmtu
- ipv6 pathmtu age
- reset ipv6 address-policy
- reset ipv6 attack-source overlapping-fragment
- reset ipv6 neighbors
- reset ipv6 pathmtu
- reset ipv6 socket pktsort
- reset ipv6 statistics
- reset rawip ipv6 statistics
- reset tcp ipv6 authentication-statistics
- reset tcp ipv6 statistics
- reset udp ipv6 statistics
- tcp ipv6 max-mss
- tcp ipv6 min-mss
- tcp ipv6 timer fin-timeout
- tcp ipv6 timer syn-timeout
- tcp ipv6 window
- DHCPv6配置命令
- address prefix
- capwap-ac（IPv6地址池视图）
- conflict-address expire-time
- dhcpv6 client renew
- dhcpv6 duid
- dhcpv6 interface-id format
- dhcpv6 interface-id insert enable
- dhcpv6 packet-rate
- dhcpv6 packet-rate drop-alarm enable
- dhcpv6 packet-rate drop-alarm threshold
- dhcpv6 pool
- dhcpv6 relay destination
- dhcpv6 relay option79 insert enable
- dhcpv6 relay server-select
- dhcpv6 remote-id format
- dhcpv6 remote-id insert enable
- dhcpv6 remote-id rebuild enable
- dhcpv6 server（系统视图）
- dhcpv6 server（接口视图）
- dhcpv6-server
- dhcpv6 server database
- dhcpv6 server group
- display dhcpv6 duid
- display dhcpv6 pool
- display dhcpv6 relay
- display dhcpv6 relay configuration
- display dhcpv6 relay statistics
- display dhcpv6 server
- display dhcpv6 server group
- display dhcpv6 statistics
- dns-domain-name
- dns-server（IPv6地址池视图）
- excluded-address
- information-refresh
- link-address
- lock（IPv6地址池视图）
- logging（IPv6地址池视图）
- nis-domain-name
- nisp-domain-name
- nisp-server
- nis-server
- prefix-delegation
- renew-time-percent rebind-time-percent
- reset dhcpv6 pool
- reset dhcpv6 relay statistics
- reset dhcpv6 server statistics
- reset dhcpv6 statistics
- sip-domain-name
- sip-server（IPv6地址池视图）
- sntp-server
- static-bind address
- static-bind prefix
- suboption
- vendor-specific
- dhcpv6 relay source-interface
- IPv6 DNS配置命令
- IPv6 over IPv4隧道配置命令
- IPv4 over IPv6隧道配置命令
- IP路由基础配置命令
- display fib
- display fib interface
- display fib ip-prefix
- display fib longer
- display fib next-hop
- display fib statistics
- display ip routing-table
- display ip routing-table limit
- display ip routing-table protocol
- display ip routing-table statistics
- display ip routing-table time-range
- display ipv6 fib
- display ipv6 fib statistics
- display ipv6 routing-table
- display ipv6 routing-table limit
- display ipv6 routing-table protocol
- display ipv6 routing-table statistics
- display ipv6 routing-table time-range
- display rm bfd-session
- display rm interface
- display rm ipv6 interface
- display router id
- display route resource
- ip prefix-limit
- ip prefix-limit log-interval
- ip route prefix-priority-scheduler
- ipv6 fib-loadbalance-type hash-based
- ipv6 prefix-limit
- ipv6 prefix-limit log-interval
- ipv6 route prefix-priority-scheduler
- reset ip routing-table statistics protocol
- reset ipv6 routing-table statistics protocol
- router id
- 静态路由配置命令
- RIP配置命令
- bfd all-interfaces enable(RIP)
- bfd all-interfaces (RIP)
- checkzero（RIP）
- default-cost（RIP）
- default-route originate
- description (RIP)
- display default-parameter rip
- display rip
- display rip bfd session
- display rip database
- display rip graceful-restart
- display rip interface
- display rip neighbor
- display rip neighbor last-nbr-down
- display rip route
- display rip statistics interface
- filter-policy export (RIP)
- filter-policy import (RIP)
- graceful-restart (RIP)
- host-route
- import-route (RIP)
- maximum load-balancing (RIP)
- network (RIP)
- peer(RIP)
- preference (RIP)
- reset rip configuration
- reset rip statistics
- rip
- rip authentication-mode
- rip bfd
- rip bfd block
- rip bfd enable
- rip bfd static
- rip input
- rip metricin
- rip metricout
- rip mib-binding
- rip output
- rip pkt-transmit
- rip poison-reverse
- rip replay-protect
- rip split-horizon
- rip summary-address
- rip valid-ttl-hops
- rip version
- silent-interface (RIP)
- summary (RIP)
- timers rip
- verify-source（RIP）
- version（RIP）
- RIPng配置命令
- checkzero （RIPng）
- default-cost （RIPng）
- description （RIPng）
- display default-parameter ripng
- display ripng
- display ripng database
- display ripng interface
- display ripng neighbor
- display ripng neighbor last-nbr-down
- display ripng route
- display ripng statistics interface
- filter-policy export （RIPng）
- filter-policy import （RIPng）
- import-route （RIPng）
- maximum load-balancing （RIPng）
- preference （RIPng）
- reset ripng statistics
- ripng
- ripng default-route
- ripng enable
- ripng input
- ripng metricin
- ripng metricout
- ripng output
- ripng pkt-transmit
- ripng poison-reverse
- ripng split-horizon
- ripng summary-address
- timers ripng
- OSPF配置命令
- abr-summary（OSPF区域）
- area（OSPF）
- asbr-summary
- authentication-mode（OSPF区域）
- bandwidth-reference（OSPF）
- bfd all-interfaces（OSPF）
- default（OSPF）
- default-cost（OSPF区域）
- default-route-advertise（OSPF）
- description（OSPF）
- description（OSPF区域）
- display default-parameter ospf
- display gtsm statistics
- display ospf abr-asbr
- display ospf asbr-summary
- display ospf bfd session
- display ospf brief
- display ospf cumulative
- display ospf error
- display ospf global-statistics
- display ospf graceful-restart
- display ospf interface
- display ospf lsdb
- display ospf mesh-group
- display ospf nexthop
- display ospf peer
- display ospf request-queue
- display ospf retrans-queue
- display ospf routing
- display ospf spf-statistics
- display ospf statistics updated-lsa
- display ospf vlink
- display snmp-agent trap feature-name ospf all
- enable log
- filter export（OSPF区域）
- filter import（OSPF区域）
- filter-lsa-out peer
- filter-policy export（OSPF）
- filter-policy import（OSPF）
- flooding-control
- graceful-restart（OSPF）
- graceful-restart helper-role（OSPF）
- gtsm default-action
- gtsm log drop-packet
- import-route（OSPF）
- lsa-arrival-interval
- lsa-originate-interval
- lsdb-overflow-limit
- maximum load-balancing（OSPF）
- maximum-routes
- mesh-group enable
- network（OSPF区域）
- nexthop（OSPF）
- nssa（OSPF区域）
- opaque-capability enable
- ospf
- ospf authentication-mode
- ospf bfd
- ospf bfd block
- ospf cost
- ospf dr-priority
- ospf enable
- ospf filter-lsa-out
- ospf maxage-lsa auto-protect disable
- ospf mib-binding
- ospf mtu-enable
- ospf network-type
- ospf p2mp-mask-ignore
- ospf router-id auto-recover disable
- ospf smart-discover
- ospf suppress-flapping peer
- ospf suppress-flapping peer disable
- ospf suppress-flapping peer hold-down
- ospf suppress-flapping peer hold-max-cost disable
- ospf timer dead
- ospf timer hello
- ospf timer poll
- ospf timer retransmit
- ospf trans-delay
- ospf valid-ttl-hops
- peer（OSPF）
- preference（OSPF）
- prefix-priority（OSPF）
- reset gtsm statistics
- reset ospf
- reset ospf counters
- reset ospf process
- reset ospf redistribution
- retransmission-limit
- rfc1583 compatible
- sham-hello enable（OSPF）
- silent-interface（OSPF）
- snmp-agent trap enable feature-name ospf
- spf-schedule-interval
- stub（OSPF区域）
- stub-router（OSPF）
- suppress-flapping peer disable（OSPF）
- vlink-peer（OSPF区域）
- OSPFv3配置命令
- abr-summary (OSPFv3区域视图)
- area (OSPFv3)
- asbr-summary (OSPFv3)
- authentication-mode（OSPFv3）
- bandwidth-reference (OSPFv3)
- default (OSPFv3)
- default-cost (OSPFv3区域视图)
- default-route-advertise (OSPFv3)
- description (OSPFv3区域视图)
- description (OSPFv3)
- display default-parameter ospfv3
- display ospfv3
- display ospfv3 abr-summary-list
- display ospfv3 area
- display ospfv3 asbr-summary
- display ospfv3 black-box neighbor-down
- display ospfv3 error
- display ospfv3 graceful-restart-information
- display ospfv3 interface
- display ospfv3 lsdb
- display ospfv3 next-hop
- display ospfv3 path
- display ospfv3 peer
- display ospfv3 request-list
- display ospfv3 retrans-list
- display ospfv3 routing
- display ospfv3 topology
- display ospfv3 vlink
- display snmp-agent trap feature-name ospfv3 all
- filter export（OSPFv3区域视图）
- filter import（OSPFv3）
- filter-policy export (OSPFv3)
- filter-policy import (OSPFv3)
- helper-role (OSPFv3)
- import-route (OSPFv3)
- lsa-arrival-interval (OSPFv3)
- lsa-forwarding-address
- lsa-originate-interval (OSPFv3)
- maximum load-balancing (OSPFv3)
- nexthop (OSPFv3)
- nssa (OSPFv3区域视图)
- ospfv3
- ospfv3 area
- ospfv3 authentication-mode
- ospfv3 cost
- ospfv3 dr-priority
- ospfv3 mib-binding
- ospfv3 mtu-ignore
- ospfv3 network-type
- ospfv3 peer router-id
- ospfv3 router-id auto-recover disable
- ospfv3 suppress-flapping peer
- ospfv3 suppress-flapping peer disable
- ospfv3 suppress-flapping peer hold-down
- ospfv3 suppress-flapping peer hold-max-cost disable
- ospfv3 timer dead
- ospfv3 timer hello
- ospfv3 timer poll
- ospfv3 timer retransmit
- ospfv3 trans-delay
- ospfv3 valid-ttl-hops
- suppress-flapping peer disable（OSPFv3）
- preference (OSPFv3)
- reset ospfv3
- reset ospfv3 suppress-flapping peer
- rfc1583 compatible（OSPFv3）
- router-id (OSPFv3)
- sham-hello enable (OSPFv3)
- silent-interface (OSPFv3)
- snmp-agent trap enable feature-name ospfv3
- spf timers
- spf-schedule-interval (OSPFv3)
- stub (OSPFv3区域视图)
- stub-router (OSPFv3)
- vlink-peer (OSPFv3区域视图)
- IS-IS（IPv4）配置命令
- adjacency-strict-check enable
- area-authentication-mode
- attached-bit advertise
- attached-bit avoid-learning
- auto-cost enable
- bandwidth-reference (IS-IS)
- bfd all-interfaces （IS-IS）
- bfd all-interfaces enable
- circuit-cost
- circuit default-tag
- cost-style
- default-route-advertise(IS-IS)
- description (IS-IS)
- display default-parameter isis
- display isis cost interface
- display isis bfd interface
- display isis bfd session
- display isis brief
- display isis debug-switches
- display isis error
- display isis graceful-restart status
- display isis interface
- display isis last-peer-change
- display isis lsdb
- display isis mesh-group
- display isis name-table
- display isis peer
- display isis purge packet
- display isis route
- display isis spf-log
- display isis spf-tree
- display isis statistics
- display snmp-agent trap feature-name isis all
- display snmp-agent trap feature-name isis-std all
- domain-authentication-mode
- filter-policy export (IS-IS)
- filter-policy import (IS-IS)
- flash-flood
- graceful-restart (IS-IS)
- graceful-restart no-impact-holdtime
- graceful-restart interval
- graceful-restart suppress-sa
- graceful-restart t2-interval
- import-route (IS-IS)
- import-route isis level-1 into level-2
- import-route isis level-2 into level-1
- isis
- isis authentication-mode
- isis bfd
- isis bfd block
- isis bfd enable
- isis bfd static
- isis circuit-level
- isis circuit-type
- isis cost
- isis delay-peer
- isis dis-name
- isis dis-priority
- isis enable
- isis lsp seq-overflow auto-recover disable
- isis mesh-group
- isis padding-hello
- isis peer-ip-ignore
- isis ppp-negotiation
- isis ppp-osicp-check
- isis purge-lsp auto-protect disable
- isis silent
- isis small-hello
- isis suppress-flapping peer
- isis suppress-flapping peer disable
- isis suppress-flapping peer hold-down
- isis suppress-flapping peer hold-max-cost disable
- isis suppress-reachability
- isis system-id auto-recover disable
- isis tag-value
- isis timer csnp
- isis timer hello
- isis timer holding-multiplier
- isis timer lsp-retransmit
- isis timer lsp-throttle
- is-level
- is-name
- is-name map
- log-peer-change
- lsp-fragments-extend
- lsp-length
- maximum load-balancing (IS-IS)
- network-entity
- nexthop (IS-IS)
- optional-checksum enable
- preference (IS-IS)
- prefix-priority (IS-IS)
- purge-originator-identification enable
- reset isis all
- reset isis peer
- set-overload
- snmp-agent trap enable feature-name isis
- snmp-agent trap enable feature-name isis-std
- spf-priority
- spf-slice-size
- summary (IS-IS)
- suppress-flapping peer disable（IS-IS）
- timer lsp-generation
- timer lsp-max-age
- timer lsp-refresh
- timer spf
- virtual-system
- IS-IS（IPv6）配置命令
- ipv6 auto-cost enable
- ipv6 bandwidth-reference
- ipv6 circuit-cost
- ipv6 circuit default-tag
- ipv6 default-route-advertise
- ipv6 enable(IS-IS)
- ipv6 filter-policy export
- ipv6 filter-policy import
- ipv6 import-route
- ipv6 import-route isis level-1 into level-2
- ipv6 import-route isis level-2 into level-1
- ipv6 maximum load-balancing
- ipv6 preference
- ipv6 prefix-priority (IS-IS)
- ipv6 spf-priority
- ipv6 summary
- isis ipv6 cost
- isis ipv6 enable
- isis ipv6 suppress-reachability
- isis ipv6 tag-value
- BGP配置命令
- active-route-advertise
- aggregate (BGP)
- as-notation plain
- as-path-limit
- bestroute as-path-ignore
- bestroute igp-metric-ignore
- bestroute med-confederation (BGP)
- bestroute med-none-as-maximum
- bestroute routerid-prior-clusterlist
- bgp
- check-first-as
- compare-different-as-med
- confederation id
- confederation nonstandard
- confederation peer-as
- dampening
- default ipv4-unicast
- default local-preference
- default med
- default-route imported
- deterministic-med (BGP)
- display bgp bfd session
- display bgp error
- display bgp error discard
- display bgp group
- display bgp ipv6 routing-table
- display bgp ipv6 routing-table statistics
- display bgp multicast group
- display bgp multicast network
- display bgp multicast paths
- display bgp multicast peer
- display bgp multicast routing-table
- display bgp multicast routing-table as-path-filter
- display bgp multicast routing-table cidr
- display bgp multicast routing-table community
- display bgp multicast routing-table community-filter
- display bgp multicast routing-table dampened
- display bgp multicast routing-table dampening parameter
- display bgp multicast routing-table different-origin-as
- display bgp multicast routing-table flap-info
- display bgp multicast routing-table peer
- display bgp multicast routing-table regular-expression
- display bgp multicast routing-table statistics
- display bgp multicast update-peer-group
- display bgp network
- display bgp paths
- display bgp peer
- display bgp peer orf ip-prefix
- display bgp resource
- display bgp routing-table
- display bgp routing-table dampened
- display bgp routing-table dampening parameter
- display bgp routing-table flap-info
- display bgp routing-table statistics
- display bgp update-peer-group
- display default-parameter bgp
- display mbgp routing-table
- display mbgp routing-table statistics
- display snmp-agent trap feature-name bgp all
- ebgp-interface-sensitive
- ext-community-change enable
- filter-policy export (BGP)
- filter-policy import (BGP)
- graceful-restart (BGP)
- graceful-restart peer-reset
- graceful-restart timer restart
- graceful-restart timer wait-for-rib
- group
- import-route (BGP)
- ipv4-family
- ipv6-family
- load-balancing as-path-ignore
- maximum load-balancing (BGP)
- network (BGP)
- nexthop recursive-lookup (BGP)
- nexthop recursive-lookup delay
- nexthop recursive-lookup non-critical-event delay
- out-delay
- peer advertise-community
- peer advertise-ext-community
- peer allow-as-loop
- peer as-number
- peer as-path-filter
- peer bfd
- peer bfd block
- peer bfd enable
- peer capability-advertise
- peer capability-advertise orf
- peer connect-interface
- peer connected-check-ignore
- peer default-route-advertise
- peer description (BGP)
- peer discard-ext-community (BGP)
- peer ebgp-max-hop
- peer enable (BGP)
- peer fake-as
- peer filter-policy
- peer group
- peer ignore
- peer ip-prefix
- peer keychain (BGP)
- peer keep-all-routes
- peer listen-only
- peer log-change
- peer next-hop-invariable
- peer next-hop-local
- peer out-delay
- peer password
- peer path-mtu auto-discovery
- peer preferred-value
- peer public-as-only
- peer reflect-client
- peer route-limit
- peer route-policy
- peer route-update-interval
- peer timer
- peer timer connect-retry
- peer tracking
- peer valid-ttl-hops
- preference (BGP)
- reflect between-clients
- reflect change-path-attribute
- reflector cluster-id
- refresh bgp
- refresh bgp multicast
- refresh bgp multicast external
- refresh bgp multicast internal
- reset bgp
- reset bgp dampening
- reset bgp flap-info
- reset bgp flapping-count
- reset bgp multicast
- reset bgp multicast dampening
- reset bgp multicast external
- reset bgp multicast flap-info
- reset bgp multicast internal
- router-id (BGP)
- route-select delay
- routing-table rib-only
- routing-table limit threshold-alarm
- shutdown（BGP）
- slow-peer detection
- snmp-agent trap enable feature-name bgp
- summary automatic
- supernet unicast advertise
- timer (BGP)
- timer connect-retry
- undo synchronization (BGP)
- 路由策略配置命令
- apply as-path
- apply comm-filter delete
- apply community
- apply cost
- apply cost-type
- apply dampening
- apply ip-address next-hop（Route-Policy视图）
- apply ip-precedence
- apply ipv6 next-hop
- apply isis
- apply local-preference
- apply origin
- apply ospf
- apply preference
- apply preferred-value
- apply tag
- description（Route-Policy视图）
- display ip as-path-filter
- display ip community-filter
- display ip ip-prefix
- display ip ipv6-prefix
- display route-policy
- if-match acl（Route-Policy视图）
- if-match as-path-filter
- if-match community-filter
- if-match cost
- if-match interface
- if-match ip
- if-match ip-prefix
- if-match ipv6
- if-match preference
- if-match route-type
- if-match tag
- ip as-path-filter
- ip community-filter
- ip ip-prefix
- ip ipv6-prefix
- reset ip ip-prefix
- reset ip ipv6-prefix
- reset route-policy counters
- route-policy
- route-policy-change notify-delay
- IGMP配置命令
- display default-parameter igmp
- display igmp control-message counters
- display igmp explicit-tracking
- display igmp group
- display igmp group ssm-mapping
- display igmp group static
- display igmp interface
- display igmp invalid-packet
- display igmp routing-table
- display igmp ssm-mapping
- igmp
- igmp enable
- igmp global limit
- igmp group-policy
- igmp ip-source-policy
- igmp lastmember-queryinterval
- igmp limit
- igmp max-response-time
- igmp on-demand
- igmp prompt-leave
- igmp query ip-source-policy
- igmp require-router-alert
- igmp robust-count
- igmp send-router-alert
- igmp ssm-mapping enable
- igmp static-group
- igmp timer other-querier-present
- igmp timer query
- igmp version
- lastmember-queryinterval (IGMP)
- limit（IGMP）
- max-response-time (IGMP)
- prompt-leave（IGMP）
- require-router-alert (IGMP)
- reset igmp control-message counters
- reset igmp explicit-tracking
- reset igmp group
- reset igmp group ssm-mapping
- robust-count（IGMP）
- send-router-alert（IGMP）
- ssm-mapping (IGMP)
- timer other-querier-present (IGMP)
- timer query (IGMP)
- version（IGMP）
- PIM（IPv4）配置命令
- auto-rp listening enable
- bsm semantic fragmentation（IPv4）
- bsr-policy（IPv4）
- c-bsr（IPv4）
- c-bsr admin-scope
- c-bsr global
- c-bsr group
- c-bsr hash-length（IPv4）
- c-bsr holdtime（IPv4）
- c-bsr interval（IPv4）
- c-bsr priority（IPv4）
- c-rp（IPv4）
- c-rp advertisement-interval（IPv4）
- c-rp holdtime（IPv4）
- c-rp priority（IPv4）
- crp-policy（IPv4）
- display default-parameter pim-dm
- display default-parameter pim-sm
- display default-parameter pim-ssm
- display pim bfd session
- display pim bsr-info
- display pim claimed-route
- display pim control-message counters
- display pim grafts
- display pim interface
- display pim invalid-packet
- display pim neighbor
- display pim routing-table
- display pim rp-info
- hello-option dr-priority（IPv4）
- hello-option holdtime（IPv4）
- hello-option lan-delay（IPv4）
- hello-option neighbor-tracking（IPv4）
- hello-option override-interval（IPv4）
- holdtime assert（IPv4）
- holdtime join-prune（IPv4）
- join-prune max-packet-length（IPv4）
- join-prune periodic-messages queue-size（IPv4）
- join-prune triggered-message-cache disable（IPv4）
- neighbor-check（IPv4）
- pim
- pim bfd
- pim bfd enable
- pim bsr-boundary
- pim dm
- pim hello-option dr-priority
- pim hello-option holdtime
- pim hello-option lan-delay
- pim hello-option neighbor-tracking
- pim hello-option override-interval
- pim holdtime assert
- pim holdtime join-prune
- pim join-policy
- pim neighbor-policy
- pim require-genid
- pim silent
- pim sm
- pim state-refresh-capable
- pim timer dr-switch-delay
- pim timer graft-retry
- pim timer hello
- pim timer join-prune
- pim triggered-hello-delay
- probe-interval（IPv4）
- register-header-checksum
- register-policy（IPv4）
- register-source
- register-suppression-timeout（IPv4）
- reset pim control-message counters
- reset pim routing-table
- source-lifetime（IPv4）
- source-policy（IPv4）
- spt-switch-threshold（IPv4）
- ssm-policy（IPv4）
- state-refresh-interval（IPv4）
- state-refresh-rate-limit（IPv4）
- state-refresh-ttl（IPv4）
- static-rp（IPv4）
- timer hello（IPv4）
- timer join-prune（IPv4）
- timer spt-switch（IPv4）
- 组播路由管理（IPv4）命令
- display default-parameter mrm
- display migp routing-table
- display migp routing-table statistics
- display mrt routing-table
- display mrt routing-table statistics
- display mtrace statistics
- display multicast boundary
- display multicast forwarding-table
- display multicast routing-table
- display multicast routing-table static
- display multicast rpf-info
- ip rpf-route-static
- mtrace
- mtrace query-policy
- multicast boundary
- multicast forwarding-table downstream-limit
- multicast forwarding-table route-limit
- multicast invalid-packet
- multicast load-splitting
- multicast load-splitting weight
- multicast load-splitting-timer
- multicast longest-match
- multicast routing-enable
- ping multicast
- reset mtrace statistics
- reset multicast forwarding-table
- reset multicast routing-table
- IGMP Snooping配置命令
- display igmp-snooping
- display igmp-snooping configuration
- display igmp-snooping port-info
- display igmp-snooping querier
- display igmp-snooping router-port
- display igmp-snooping statistics
- display l2-multicast forwarding-mode
- display l2-multicast forwarding-table
- igmp-snooping enable（系统视图）
- igmp-snooping enable（VLAN视图）
- igmp-snooping group-limit
- igmp-snooping group-policy（接口视图）
- igmp-snooping group-policy（VLAN视图）
- igmp-snooping lastmember-queryinterval
- igmp-snooping learning
- igmp-snooping max-response-time
- igmp-snooping prompt-leave
- igmp-snooping proxy
- igmp-snooping proxy-uplink-port
- igmp-snooping querier enable
- igmp-snooping query-interval
- igmp-snooping report-suppress（VLAN视图）
- igmp-snooping require-router-alert
- igmp-snooping robust-count
- igmp-snooping router-aging-time
- igmp-snooping router-learning（接口视图）
- igmp-snooping router-learning（VLAN视图）
- igmp-snooping send-query enable
- igmp-snooping send-query source-address
- igmp-snooping send-router-alert
- igmp-snooping ssm-mapping
- igmp-snooping ssm-mapping enable
- igmp-snooping ssm-policy
- igmp-snooping static-group suppress-dynamic-join
- igmp-snooping static-router-port
- igmp-snooping suppress-time
- igmp-snooping version
- l2-multicast forwarding-mode
- l2-multicast router-port-discard
- l2-multicast static-group
- multicast drop-unknown
- reset igmp-snooping group
- reset igmp-snooping statistics
- MLD Snooping配置命令
- display l2-multicast forwarding-mode
- display mld-snooping
- display mld-snooping configuration
- display mld-snooping forwarding-table
- display mld-snooping port-info
- display mld-snooping router-port
- display mld-snooping statistics
- l2-multicast forwarding-mode
- l2-multicast router-port-discard
- mld-snooping enable
- mld-snooping group-policy（接口视图）
- mld-snooping group-policy（VLAN视图）
- mld-snooping last-listener-query-interval
- mld-snooping learning
- mld-snooping max-response-time
- mld-snooping prompt-leave
- mld-snooping proxy
- mld-snooping querier enable
- mld-snooping query-interval
- mld-snooping report-suppress
- mld-snooping require-router-alert
- mld-snooping robust-count
- mld-snooping router-aging-time
- mld-snooping router-learning
- mld-snooping send-query enable
- mld-snooping send-query source-address
- mld-snooping send-router-alert
- mld-snooping static-group
- mld-snooping static-router-port
- mld-snooping suppression-time
- mld-snooping table limit
- mld-snooping version
- multicast drop-unknown
- reset mld-snooping group
- reset mld-snooping statistics
- 组播VLAN配置命令
- 二层组播CAC配置命令
- WLAN基本业务配置命令
- ac sysnetid
- active-dull-client enable
- advertise-ap-name enable
- agile-antenna-polarization
- antenna-gain
- ap auth-mode
- ap blacklist
- ap data-collection enable
- ap data-collection interval
- ap ip version
- ap whitelist
- ap rtu load
- ap modify
- ap-confirm
- ap-id
- ap-mac
- assignment
- association-timeout
- auto-off service
- beacon-2g-rate
- beacon-5g-rate
- beacon-interval
- beamforming disable
- beamforming enable
- capwap control-link-priority
- capwap dtls control-link encrypt
- capwap dtls psk
- capwap dtls psk-mandatory-match enable
- capwap echo
- capwap ipv6 enable
- capwap source interface
- capwap source { ip-address | ipv6-address }
- capwap double-stack enable
- capwap dtls data-link encrypt
- capwap message-integrity psk
- capwap message-integrity check disable
- capwap sensitive-info psk
- channel
- channel-switch announcement disable
- channel-switch mode
- copy-from
- country-code
- coverage distance
- deny-broadcast-probe enable
- destination（Soft-GRE模板视图）
- dhcp option82 insert enable
- dhcp option82 format（VAP模板视图）
- dhcp option82 pattern（VAP模板视图）
- dhcp centralized-control enable
- display ac global configuration
- display ap
- display ap blacklist
- display ap config-info
- display ap configurable channel
- display ap global configuration
- display ap offline-record
- display ap online-fail-record
- display ap radio-mode all
- display ap-rtu-status all
- display ap sta-signal strength
- display ap unauthorized record
- display ap whitelist
- display ap-group
- display capwap configuration
- display radio
- display radio-2g-profile
- display radio-5g-profile
- display references radio-2g-profile
- display references radio-5g-profile
- display references regulatory-domain-profile
- display references softgre-profile
- display references ssid-profile
- display references vap-profile
- display references vlan pool
- display regulatory-domain-profile
- display resource occupancy message
- display softgre-profile
- display softgre-tunnel-status
- display ssid-profile
- display sta-offline-delay configuration
- display station
- display station assoc-info ap-offline-record
- display station offline-record
- display station online-fail-record
- display station statistics
- display vap
- display vap-profile
- display vlan pool
- display wlan config-errors
- display ap ip-version-conflict status
- display ap statistics
- display station online-track
- display vap create-fail-record
- display vap-service-backup auth-server-down
- dot11a basic-rate
- dot11a supported-rate
- dot11bg basic-rate
- dot11bg supported-rate
- dtim-interval
- eirp
- forward-mode
- fragmentation-threshold
- frequency
- guard-interval-mode
- he mcs-map（SSID模板）
- a-mpdu disable
- ht a-mpdu max-length-exponent
- keepalive（Soft-GRE模板视图）
- keep-service enable（VAP模板视图）
- learn-client-address conflict-uncheck
- legacy-station disable
- max-sta-number（SSID模板视图）
- mdns centralized-control enable
- multicast-rate
- mu-ba-trigger mode
- mu-mimo disable
- mu-mimo optimize enable
- ofdma downlink disable
- ofdma uplink disable
- permit-vlan vlan-id
- probe-response-retry
- qbss-load enable
- radio
- radio disable
- radio-2g-profile（WLAN视图）
- radio-2g-profile
- radio-5g-profile（WLAN视图）
- radio-5g-profile
- radio-type（2G射频模板视图）
- radio-type（5G射频模板视图）
- radio-mode
- reach-max-sta
- regulatory-domain-profile（WLAN视图）
- regulatory-domain-profile
- report-sta-assoc enable
- reset ap offline-record
- reset ap online-fail-record
- reset ap unauthorized record
- reset channel switch-record
- reset station assoc-info ap-offline-record
- reset station offline-record
- reset station online-fail-record
- reset station statistics
- rf-ping
- rts-cts-mode
- rts-cts-threshold
- service-mode disable
- service-vlan（VAP模板视图）
- short-preamble disable
- single-txchain enable
- snmp-agent trap enable feature-name wlan
- softgre-profile（WLAN视图）
- ssid
- ssid-hide enable
- ssid-profile（WLAN视图）
- ssid-profile（VAP模板视图）
- sta-network-detect disable
- sta-offline-delay aging-time
- sta-offline-delay enable
- sta-offline-delay full-sta-reject enable
- sta-offline-delay max-number
- station connectivity-detect disable
- twt enable
- type（VAP模板视图）
- u-apsd enable
- undo ap
- untagged vlan（Soft-GRE模板视图）
- utmost-power
- vap-profile（WLAN视图）
- vap-profile
- vap-service-backup auth-server-down
- vht a-mpdu max-length-exponent
- a-msdu enable
- vht a-msdu max-frame-num
- vht mcs-map
- vht mcs-map（SSID模板）
- vip-user bandwidth reservation-ratio
- vlan pool
- vlan（VLAN pool视图）
- wlan
- AP管理配置命令
- access-user syslog-restrain enable
- access-user syslog-restrain period
- ac-list（AP视图）
- ac-list（AP上线参数配置视图）
- ac-list ipv6（AP视图）
- ac-list ipv6（AP上线参数配置视图）
- address-mode（AP视图）
- address-mode（AP上线参数配置视图）
- alarm-restriction disable
- alarm-restriction period
- ap lldp enable
- ap manufacturer-config
- ap update ftp-server
- ap update ftp-server max-connect-number
- ap update load
- ap update mode
- ap update multi-load
- ap update multi-reset
- ap update reset
- ap update sftp-server
- ap update sftp-server max-connect-number
- ap update update-filename
- ap update schedule-task
- ap username
- ap-group
- ap-group（AP视图）
- ap-group all vap-profile
- ap-group all wired-port-profile
- ap-mode
- ap-name
- ap-name（AP上线参数配置视图）
- ap-name（AP视图）
- ap password policy
- ap-patch update load
- ap-patch update multi-load
- ap-patch update update-filename
- ap-ping
- ap-regroup
- ap-rename
- ap-reset
- ap-system-profile（WLAN视图）
- ap-system-profile（AP组视图和AP视图）
- ap-type
- auto create ap-type
- broadcast-suppression auto-detect（AP系统模板视图）
- capwap dtls data-link encrypt（AP系统模板视图）
- channel-load-mode indoor
- clear configuration this
- commit（AP上线参数配置视图）
- console ble-mode（AP系统模板视图）
- console disable
- coordinate
- cpu-usage threshold
- crc-alarm enable
- description（AP有线口模板视图）
- dai enable（AP有线口模板视图）
- dhcp client option12
- display ap around-ssid-list
- display ap asyn-message err-info
- display ap coordinate
- display ap elabel
- display ap fan
- display ap lldp neighbor
- display ap led
- display ap optical-info
- display ap performance statistics
- display ap provision
- display ap port
- display ap power-workmode
- display ap power
- display ap run-info
- display ap service-config acl
- display ap uncontrol all
- display ap update configuration
- display ap update schedule-task
- display ap update status
- display ap update status partition
- display ap username
- display ap version
- display ap wired-port
- display ap-system-profile
- display ap-type
- display ap-type undefined record
- display ap-type attributes abnormal-check-record
- display distribute-ap
- display mac-address ap-all
- display mac-address { ap-id | ap-name }
- display port-link-profile
- display provision-ap parameter-list
- display references ap-system-profile
- display references port-link-profile
- display references wired-port-profile
- display wired-port-profile
- display wlan ble-link-info
- display wlan console ble statistics
- disk-usage threshold
- eapol-response dest-address transform-condition
- eapol-response dest-address transform-to
- eapol-start dest-address transform-condition
- eapol-start dest-address transform-to
- eth-trunk （AP有线口模板视图）
- forward-mode（AP有线口模板视图）
- high-temperature threshold
- ipsg enable（AP有线口模板视图）
- ip-address（AP视图）
- ip-address（AP上线参数配置视图）
- igmp-snooping enable（AP有线口模板视图）
- ipv6-address（AP视图）
- ipv6-address（AP上线参数配置视图）
- keep-service enable
- keep-service enable allow new-access
- learn-client-address enable（AP有线口模板视图）
- led blink-time
- led off
- lldp admin-status
- lldp dot3-tlv power（AP有线口链路模板视图）
- lldp enable
- lldp message-transmission delay（AP系统模板视图）
- lldp message-transmission hold-multiplier（AP系统模板视图）
- lldp message-transmission interval（AP系统模板视图）
- lldp report enable
- lldp report-interval
- lldp restart-delay
- lldp tlv-enable（AP有线口链路模板视图）
- lldp tlv-enable legacy-tlv four-pair-power（AP有线口链路模板视图）
- lldp tlv-enable legacy-tlv power-capability（AP有线口链路模板视图）
- log-record-level
- log-server
- low-temperature threshold
- management-vlan
- memory-usage threshold
- mld-snooping enable（AP有线口模板视图）
- mode（AP有线口模板视图）
- mtu
- multicast-suppression auto-detect（AP系统模板视图）
- np capwap-reassembly disable（AP系统模板视图）
- np fast-forwarding disable（AP系统模板视图）
- password alert before-expire（AP密码策略视图）
- password alert original（AP密码策略视图）
- password expire（AP密码策略视图）
- password history record number（AP密码策略视图）
- poe af-inrush enable（AP系统模板视图）
- poe disable（AP有线口链路模板视图）
- poe force-power（AP有线口链路模板视图）
- poe high-inrush enable（AP系统模板视图）
- poe legacy enable（AP有线口链路模板视图）
- poe max-power（AP系统模板视图）
- poe power-reserved（AP系统模板视图）
- poe power-threshold（AP系统模板视图）
- poe power-off time-range（AP有线口链路模板视图）
- poe priority（AP有线口链路模板视图）
- port-link-profile（WLAN视图）
- port-link-profile（AP有线口模板视图）
- port-security enable（AP有线口模板视图）
- port-security mac-address sticky（AP有线口模板视图）
- port-security max-mac-num（AP有线口模板视图）
- port-security protect-action（AP有线口模板视图）
- power force work-mode
- provision-ap
- report-disassoc-request disable
- report-sta-info enable
- reset ap-type undefined record
- reset mac-address
- reset statistics
- reset statistics all
- reset wlan console ble statistics
- sample-time
- sftp server disable
- shutdown（AP有线口链路模板视图）
- ssh client first-time enable（AP系统模板视图）
- speed（AP有线口链路模板视图）
- sta-ipv6-service enable
- stelnet server disable
- stp auto-shutdown enable（AP有线口模板视图）
- stp auto-shutdown recovery-time（AP有线口模板视图）
- stp enable（AP有线口模板视图）
- telnet enable
- temporary-management disable（AP系统模板视图）
- temporary-management enable（VAP模板视图）
- temporary-management psk
- traffic-filter（AP有线口模板视图）
- traffic-remark（AP有线口模板视图）
- traffic-optimize（AP有线口模板视图）
- traffic-optimize broadcast-suppression disable（AP系统模板视图）
- traffic-optimize broadcast-suppression rate-threshold（AP系统模板视图）
- traffic-optimize tcp adjust-mss
- unicast-suppression auto-detect（AP系统模板视图）
- unicast-suppression auto-detect disable（AP系统模板视图）
- usb enable（AP系统模板视图）
- user-interface vty acl
- user-interface vty idle-timeout
- user-interface vty screen-length
- user-isolate（AP有线口模板视图）
- vlan pvid（AP有线口模板视图）
- vlan（AP有线口模板视图）
- wifi-light
- wired-port-profile（WLAN视图）
- wired-port-profile（AP组视图和AP视图）
- WLAN射频资源管理配置命令
- amc-policy
- air-scan-profile
- air-scan-profile（射频模板视图）
- anti-interference disable
- anti-interference per-packet-tpc disable
- band-steer balance gap-threshold
- band-steer balance start-threshold
- band-steer client-band-expire
- band-steer deny-threshold
- band-steer disable
- band-steer snr-threshold
- bss-color disable
- btm-fail-times
- calibrate auto-bandwidth-select
- calibrate auto-channel-select
- calibrate auto-txpower-select
- calibrate enable { auto | manual | schedule time }
- calibrate environment-deterioration-blacklist
- calibrate retransmission-rate-check
- calibrate retransmission-rate-threshold
- calibrate tpc threshold
- calibrate flexible-radio
- calibrate flexible-radio disable
- calibrate flexible-radio manual-recognize
- calibrate max-tx-power
- calibrate min-tx-power
- calibrate manual startup
- calibrate noise-floor-threshold
- calibrate policy
- calibrate reference data-analysis disable
- calibrate reference data-analysis
- calibrate reference rogue-ap-interference disable
- calibrate sensitivity
- calibrate virtual-group-size
- cca-threshold
- dca-channel bandwidth
- dca-channel channel-set
- deauth-fail-times
- dfs recover-delay
- dfs smart-selection disable
- display air-scan-profile
- display anti-interference config
- display ap neighbor
- display ap traffic statistics wireless
- display channel switch-record
- display flexible-radio status
- display flexible-radio switch-record
- display references air-scan-profile
- display references rrm-profile
- display rrm-profile
- display sta-load-balance static-group
- display sta-load-balance fairness
- display station neighbor
- display station neighbor all
- display station steer-history
- display station steer-info
- display station steer-statistics
- display station unsteerable
- display wlan calibrate channel-set
- display wlan calibrate global configuration
- display wlan calibrate statistics
- dynamic-edca enable
- dynamic-edca threshold
- high-density amc-optimize enable
- interference adjacent-channel threshold
- interference co-channel threshold
- interference detect-enable
- interference station threshold
- member（静态负载均衡组视图）
- power auto-adjust enable
- reset ap traffic statistics wireless
- reset station steer-history
- reset station steer-statistics
- reset flexible-radio switch-record
- reset wlan calibrate statistics
- rrm-profile（WLAN视图）
- rrm-profile（射频模板视图）
- rssi-diff-gap
- rssi-threshold
- scan-channel-set
- scan-disable
- scan-enhancement
- scan-interval
- scan-period
- smart-antenna { enable | disable }
- smart-antenna throughput-triggered-training
- smart-antenna training-interval
- smart-antenna training-mpdu-number
- smart-antenna valid-per-scope
- smart-roam advanced-scan disable
- smart-roam disable
- smart-roam quick-kickoff back-off-time
- smart-roam quick-kickoff-snr check-interval
- smart-roam quick-kickoff-snr p-n criteria
- smart-roam quick-kickoff-threshold
- smart-roam quick-kickoff-threshold { check-snr | check-rate }
- smart-roam quick-kickoff-threshold disable
- smart-roam roam-threshold { check-snr | check-rate }
- smart-roam roam-threshold { snr | rate }
- smart-roam snr-margin
- smart-roam unable-roam-client expire-time
- spatial-reuse disable
- sta-load-balance dynamic btm-fail-times
- sta-load-balance dynamic deauth-fail-times
- sta-load-balance dynamic disable
- sta-load-balance dynamic sta-number gap-threshold
- sta-load-balance dynamic sta-number start-threshold
- sta-load-balance dynamic probe-report interval
- sta-load-balance dynamic rssi-diff-gap
- sta-load-balance dynamic rssi-threshold
- sta-load-balance dynamic steer-restrict auth-threshold
- sta-load-balance dynamic steer-restrict probe-threshold
- sta-load-balance dynamic steer-restrict restrict-time
- sta-load-balance static-group
- sta-number gap-threshold
- sta-number start-threshold
- steer-restrict auth-threshold
- steer-restrict probe-threshold
- steer-restrict restrict-time
- uac enable
- uac client-number threshold
- uac client-snr threshold
- uac reach-access-threshold
- WLAN频谱分析配置命令
- WLAN漫游配置命令
- autonavigation-roam-optimize beacon-interval
- autonavigation-roam-optimize enable
- beacon disable
- capwap dtls inter-controller control-link encrypt
- capwap dtls inter-controller data-link encrypt
- capwap dtls inter-controller psk
- capwap inter-controller sensitive-info psk
- cts delay
- cts disable
- display mobility-client all
- display mobility-server
- display mobility-group
- display station roam-track
- display station roam-statistics
- dot11r enable
- dot11r proprietary
- dot11r reassociate-timeout
- home-agent
- layer3-roam disable
- member（漫游组视图）
- mobility-group
- mobility-server
- neighbor-relation
- sfn-roam enable
- sfn-roam report-interval
- sfn-roam roam-check better-times
- sfn-roam roam-check check-interval
- sfn-roam roam-check gap-rssi
- sfn-roam roam-check high-threshold
- sfn-roam roam-check low-threshold
- sfn-roam roam-check rssi-accumulate
- sfn-roam roam-check sta-holding times
- vlan-mobility-group
- inter-ac roam disable
- WLAN定位配置命令
- aeroscout compound-time
- aeroscout local
- aeroscout mu-enable
- aeroscout server
- aeroscout tag-enable
- ble low-power-threshold
- ble monitoring-list
- ble report
- ble source
- ble-profile（AP组视图和AP视图）
- ble-profile（WLAN视图）
- broadcaster enable
- broadcasting-content
- broadcasting-content（AP组视图）
- broadcasting-content（AP视图）
- broadcasting-interval
- display ble-profile
- display location-profile
- display references ble-profile
- display references location-profile
- display wlan ble global configuration
- display wlan ble monitoring-list
- display wlan ble site-info
- display wlan location config-info aeroscout
- display wlan location device-info tag
- display wlan location global configuration
- display wlan location statistics aeroscout
- ekahau server
- ekahau tag-enable
- location source
- location-profile
- location-profile（WLAN视图）
- private mu protocol-version
- private mu-enable
- private report-frequency
- private report-protocol
- private server
- report enable
- report-mode
- report-to-server
- reset wlan ble site-info
- reset wlan location device-info tag
- sniffer enable
- source（定位模板视图）
- source（BLE模板视图）
- tx-power（BLE模板视图）
- WLAN安全配置命令
- anti-attack flood blacklist enable
- anti-attack flood disable
- anti-attack flood sta-rate-threshold
- arp anti-attack check user-bind enable
- brute-force-detect interval
- brute-force-detect quiet-time
- brute-force-detect threshold
- contain
- contain-mode
- device report-interval
- dhcp trust port
- display ap radio-environment
- display references wids-whitelist-profile
- display references wids-profile
- display references wids-spoof-profile
- display wlan wids manual-contain device-mac-list
- display wids-whitelist-profile
- display wids-profile
- display wids-spoof-profile
- display station dynamic-blacklist
- display wlan ids attack-detected
- display wlan ids attack-detected statistics
- display wlan ids attack-history
- display wlan ids contain
- display wlan ids device-detected
- display wlan ids device-detected statistics
- display wlan dynamic-blacklist
- display wlan ids rogue-history
- display wlan ids spoof-ssid fuzzy-match
- dynamic-blacklist aging-time
- dynamic-blacklist disable
- flood-detect interval
- flood-detect quiet-time
- flood-detect threshold
- ip source check user-bind enable
- learn-client-address dhcp-strict
- learn-client-address dhcpv6-strict
- learn-client-address disable（VAP模板视图）
- nd trust port
- permit-ap
- reset wlan ids attack-detected
- reset wlan ids attack-detected statistics
- reset wlan ids attack-history
- reset wlan dynamic-blacklist
- reset wlan ids rogue-history
- rogue-device log enable
- spoof-detect quiet-time
- spoof-ssid
- sta arp-nd-proxy before-assoc
- weak-iv-detect quiet-time
- wids attack detect
- wids contain enable
- wids device detect enable
- wids manual-contain
- wids-whitelist-profile（WLAN视图）
- wids-profile（WLAN视图）
- wids-spoof-profile（WLAN视图）
- work-mode
- WDS和Mesh配置命令
- WLAN WDS配置命令
- dhcp trust port（WDS模板视图）
- display references wds-profile
- display references wds-whitelist-profile
- display wds-profile
- display wds-whitelist-profile
- display wds vap
- display wlan wds link
- nd trust port（WDS模板视图）
- peer-ap mac（WDS白名单模板视图）
- priority-map dscp（WDS模板视图）
- priority-map trust（WDS模板视图）
- security-profile（WDS模板视图）
- vlan tagged（WDS模板视图）
- wds-mode
- wds-name
- wds-profile
- wds-profile radio
- wds-profile（AP组射频视图或AP射频视图）
- wds-whitelist-profile
- wds-whitelist-profile（AP组射频视图或AP射频视图）
- WLAN Mesh配置命令
- dhcp trust port（Mesh模板视图）
- display mesh-profile
- display mesh-whitelist-profile
- display mesh vap
- display references mesh-profile
- display references mesh-whitelist-profile
- display wlan mesh link
- display wlan mesh route
- fwa wmm edca-client
- fwa wmm edca-mode
- fwa enable
- link-aging-time
- link-report-interval
- link-rssi-threshold
- max-link-number
- mesh-id
- mesh-profile
- mesh-profile radio
- mesh-profile（AP组射频视图或AP射频视图）
- mesh-role
- mesh-whitelist-profile
- mesh-whitelist-profile（AP组射频视图或AP射频视图）
- mpp-active-reselection enable
- nd trust port（Mesh模板视图）
- peer-ap mac（Mesh白名单模板视图）
- priority-map dscp（Mesh模板视图）
- priority-map trust（Mesh模板视图）
- security-profile（Mesh模板视图）
- wideband enable
- 车地通信快速切换配置命令
- Hotspot2.0配置命令
- cellular-network-profile
- cellular-network-profile（Hotspot2.0模板视图）
- connection-capability-profile
- connection-capability-profile（Hotspot2.0模板视图）
- connection-capability
- display cellular-network-profile
- display connection-capability-profile
- display hotspot2-profile
- display nai-realm-profile
- display operating-class-profile
- display operator-domain-profile
- display operator-name-profile
- display references cellular-network-profile
- display references connection-capability-profile
- display references hotspot2-profile
- display references nai-realm-profile
- display references operating-class-profile
- display references operator-domain-profile
- display references operator-name-profile
- display references roaming-consortium-profile
- display references venue-name-profile
- display roaming-consortium-profile
- display venue-name-profile
- domain-name
- hessid
- hotspot2-profile
- hotspot2-profile（VAP模板视图）
- ipv4-address-avail
- ipv6-address-avail
- nai-realm-profile
- nai-realm-profile（Hotspot2.0模板视图）
- nai-realm
- network-authen-type
- network-type
- operating-class-indication
- operating-class-profile
- operating-class-profile（Hotspot2.0模板视图）
- operator-domain-profile
- operator-domain-profile（Hotspot2.0模板视图）
- operator-friendly-name
- operator-name-profile
- operator-name-profile（Hotspot2.0模板视图）
- p2p-cross-connect disable
- plmn-id
- roaming-consortium-oi
- roaming-consortium-profile
- roaming-consortium-profile（Hotspot2.0模板视图）
- venue-name-profile
- venue-name-profile（Hotspot2.0模板视图）
- venue-name
- venue-type
- 物联网AP配置命令
- antenna-status
- card connect-type
- config-agent permit ip-address
- display ap card
- display ap-card statistics
- display ap-card all
- display iot-card iot-command-result
- display iot-profile
- display references iot-profile
- card
- iot-card iot-command
- iot-card reboot
- iot-card reset-factory-configuration
- iot-card reset-network-configuration
- iot-card switch-firmware
- iot-profile（WLAN视图）
- iot-profile（IoT插卡接口视图）
- management-server
- reset ap-card statistics
- share-key
- type（IoT模板视图）
- wired-port-profile（IoT插卡接口视图）
- WLAN流量优化命令
- broadcast-suppression auto-detect
- display wlan igmp-snooping vap-cac
- igmp-snooping group-bandwidth（AP系统模板视图）
- igmp-snooping max-bandwidth（流量模板视图）
- igmp-snooping max-user（流量模板视图）
- igmp-snooping enable（流量模板视图）
- igmp-snooping report-suppress（流量模板视图）
- mld-snooping enable（流量模板视图）
- multicast-suppression auto-detect
- service-guarantee
- traffic-optimize arp-proxy enable
- traffic-optimize bcmc deny all
- traffic-optimize bcmc unicast-send
- traffic-optimize bcmc unicast-send mismatch-action drop
- traffic-optimize broadcast-suppression
- traffic-optimize multicast-suppression
- traffic-optimize multicast-unicast enable
- traffic-optimize multicast-unicast dynamic-adaptive disable
- traffic-optimize nd-proxy enable
- traffic-optimize sta-bridge-forward disable
- traffic-optimize tcp adjust-mss
- traffic-optimize unicast-suppression
- unicast-suppression auto-detect
- unicast-suppression auto-detect disable
- License集中控制命令
- 高速公路无线网络覆盖配置命令
- display highway ap-statistics
- display highway ap-topology
- display highway sta-statistics
- display highway topology-detail link-state
- end
- highway bssid-base
- highway enable
- highway-profile（WLAN视图）
- highway-profile（AP组视图）
- middle
- radio-2g-positive
- radio-2g-reverse
- radio-5g-positive
- radio-5g-reverse
- reset highway ap-statistics
- reset highway sta-statistics
- start
- station min-speed
- undo ap（高速公路无线网络覆盖）
- VPN配置命令
- GRE配置命令
- description（Tunnel接口视图）
- destination
- display interface tunnel
- display interface virtual-ethernet
- display keepalive packets count
- display tunnel mapping
- gre checksum
- gre key
- interface tunnel
- interface virtual-ethernet
- keepalive
- map interface virtual-ethernet
- mtu（Tunnel接口视图）
- reset keepalive packets count
- source
- statistic enable（VE接口视图）
- tunnel-policy nonexistent-config-check
- tunnel-protocol
- user-isolate（VE接口视图）
- IPSec配置命令
- alias
- ah authentication-algorithm
- anti-replay window
- authentication-algorithm
- authentication-method
- certificate-request empty-payload enable
- dh
- diagnose ipsec data-flow
- diagnose ipsec interface
- diagnose ipsec peer
- display ike error-info
- display ike global config
- display ike offline-info
- display ike identity
- display ike peer（所有视图）
- display ike peer（用户视图）
- display ike proposal（所有视图）
- display ike proposal（用户视图）
- display ike sa
- display ike statistics
- display ikev2 statistics
- display ipsec global config
- display ipsec interface brief
- display ipsec history record
- display ipsec policy（所有视图）
- display ipsec policy（用户视图）
- display ipsec policy-template（所有视图）
- display ipsec policy-template（用户视图）
- display ipsec profile（所有视图）
- display ipsec profile（用户视图）
- display ipsec proposal（所有视图）
- display ipsec proposal（用户视图）
- display ipsec sa
- display ipsec statistics
- display ipsec statistics route
- dn
- dpd
- dpd msg
- dpd msg notify-hash-sequence learning
- dpd packet receive if-related enable
- dpd type
- dscp
- encapsulation-mode
- encryption-algorithm
- esp authentication-algorithm
- esp encryption-algorithm
- exchange-mode
- fqdn
- ike call admission limit in-negotiation-sa
- ike dscp
- ike heartbeat
- ike heartbeat-timer interval
- ike heartbeat-timer timeout
- ike identity
- ike local-name
- ike nat-keepalive-timer interval
- ike peer
- ike proposal
- ike-peer
- ike-proposal
- ikev1 phase1-phase2 sa dependent
- ikev2 authentication sign-hash
- ikev2 cookie-challenge
- ikev2 delete old child-sa enable
- ikev2 fragmentation
- ikev2 id-match-certificate enable
- ikev2 initial-contact enable
- inband crl
- inband ocsp
- integrity-algorithm
- ip address
- ipsec anti-replay enable
- ipsec anti-replay window
- ipsec decrypt check
- ipsec df-bit
- ipsec fragmentation before-encryption
- ipsec invalid-spi-recovery enable
- ipsec netmask
- ipsec policy shared
- ipsec policy（接口视图）
- ipsec policy（系统视图）
- ipsec policy-template
- ipsec profile（接口视图）
- ipsec profile（系统视图）
- ipsec proposal
- ipsec remote traffic-identical accept
- ipsec sa global-duration
- ipsec tunnel-index based remote-ip
- lifetime-notification-message enable
- local-address
- local-id-type
- local-id
- local-id-preference certificate enable
- local-id-reflect enable
- match ike-identity
- nat traversal
- pfs
- pki realm
- policy enable
- pre-shared-key（IKE对等体视图）
- prf
- proposal
- re-authentication interval
- remote-address（IKE对等体视图）
- remote-id
- remote-id-type
- reset ike error-info
- reset ike offline-info
- reset ike sa
- reset ike statistics
- reset ipsec history record
- reset ipsec sa
- reset ipsec statistics
- reset ipsec statistics route
- respond-only enable
- route inject
- rsa signature-padding
- sa authentication-hex
- sa duration（IKE安全提议视图）
- sa duration（IPSec安全策略视图、安全策略模板视图、安全框架视图）
- sa keep-holding-to hard-duration
- sa encryption-hex
- sa spi
- sa string-key
- sa trigger-mode
- security acl
- transform
- tunnel local
- tunnel remote（手工方式IPSec安全策略视图）
- tunnel remote（IPSec安全策略视图、安全策略模板视图、安全框架视图）
- version
- user-fqdn
- 可靠性命令
- 双机热备份配置命令
- bind-service
- display hsb statistics hsb-group
- display hsb statistics hsb-service
- display hsb-group
- display hsb-service
- display hsb-service-type access-user
- display hsb-service-type ap
- display hsb-service-type dhcp hsb-group
- hsb enable
- hsb-group
- hsb-service
- hsb-service-type access-user hsb-group
- hsb-service-type access-user hsb-service
- hsb-service-type dhcp hsb-group
- hsb-service-type ap
- key
- reset hsb statistics hsb-group
- reset hsb statistics hsb-service
- service-ip-port
- service-keep-alive detect
- track vrrp
- track vrrp6
- 双链路备份和N+1备份配置命令
- ac protect alarm-restrain enable
- ac protect cold-backup kickoff-station
- ac protect enable
- ac protect link-switch packet-loss echo-probe-time
- ac protect link-switch mode
- ac protect link-switch packet-loss
- ac protect priority
- ac protect protect-ac
- ac protect restore disable
- backup-access
- display ac protect
- primary-access
- priority
- protect-ac
- 无线配置同步配置命令
- display current-configuration sync
- display sync-configuration fail-record
- display sync-configuration compare
- display sync-configuration master-redundancy
- display sync-configuration status
- local-controller
- master controller（WLAN视图）
- master-controller
- master-redundancy peer-ip
- master-redundancy track-vrrp
- master-redundancy track-vrrp6
- synchronize-configuration
- synchronize-configuration auto
- synchronize-configuration auto disable
- BFD配置命令
- bfd
- bfd bind peer-ip
- bfd bind peer-ip default-ip
- bfd bind peer-ip source-ip auto
- bfd one-arm-echo
- bfd bfd-name
- bfd session nonexistent-config-check
- commit
- dampening timer-interval
- default-ip-address
- delay-up
- description（BFD会话视图）
- detect-multiplier
- discriminator
- display bfd configuration
- display bfd interface
- display bfd session
- display bfd statistics
- display bfd statistics session
- display bfd ttl
- display snmp-agent trap feature-name bfd all
- min-echo-rx-interval
- min-rx-interval
- min-tx-interval
- multi-hop
- peer-ip ttl
- process-interface-status
- reset bfd statistics
- shutdown（BFD会话视图）
- snmp-agent bfd trap-interval
- snmp-agent trap enable feature-name bfd
- tos-exp
- wtr
- EFM配置命令
- display efm
- display efm link-event local
- display efm session
- display error-down recovery
- display snmp-agent trap feature-name efm all
- display snmp-agent trap feature-name error-down all
- display test-packet result
- efm enable
- efm error-code notification enable
- efm error-code period
- efm error-code threshold
- efm error-frame notification enable
- efm error-frame period
- efm error-frame threshold
- efm error-frame-second notification enable
- efm error-frame-second period
- efm error-frame-second threshold
- efm holdup-timer
- efm loopback
- efm loopback ignore-request
- efm mode
- efm packet max-size
- efm src-mac
- efm threshold-event trigger error-down
- efm timeout
- efm trigger error-down
- efm trigger if-down
- efm trigger mac-renew
- error-down auto-recovery
- snmp-agent trap enable feature-name efm
- snmp-agent trap enable feature-name error-down
- test-packet start
- VRRP配置命令
- admin-vrrp vrid
- admin-vrrp6 vrid
- direct-route track vrrp
- display snmp-agent trap feature-name vrrp all
- display vrrp
- display vrrp admin-vrrp
- display vrrp binding admin-vrrp
- display vrrp binding admin-vrrp member-vrrp
- display vrrp protocol-information
- display vrrp state-change interface vrid
- display vrrp statistics
- display vrrp6
- display vrrp6 admin-vrrp6
- display vrrp6 binding admin-vrrp6
- display vrrp6 binding admin-vrrp6 member-vrrp
- display vrrp6 state-change interface vrid
- display vrrp6 statistics
- reset vrrp statistics
- reset vrrp6 statistics
- snmp-agent trap enable feature-name vrrp
- vrrp advertise send-mode
- vrrp gratuitous-arp timeout
- vrrp gratuitous-arp timeout disable
- vrrp recover-delay
- vrrp timer-advertise learning enable
- vrrp un-check ttl
- vrrp version
- vrrp version-3 send-packet-mode
- vrrp vrid authentication-mode
- vrrp vrid preempt-mode disable
- vrrp vrid preempt-mode timer delay
- vrrp vrid priority
- vrrp vrid timer advertise
- vrrp vrid track admin-vrrp vrid
- vrrp vrid track admin-vrrp6 vrid
- vrrp vrid track bfd-session
- vrrp vrid track interface
- vrrp vrid track ip route
- vrrp vrid version-3 send-packet-mode
- vrrp vrid virtual-ip
- vrrp virtual-ip route-advertise disable
- vrrp6 un-check hop-limit
- vrrp6 vrid preempt-mode disable
- vrrp6 vrid preempt-mode timer delay
- vrrp6 vrid priority
- vrrp6 vrid timer advertise
- vrrp6 vrid track admin-vrrp vrid
- vrrp6 vrid track admin-vrrp6 vrid
- vrrp6 vrid track bfd-session
- vrrp6 vrid track interface
- vrrp6 vrid virtual-ip
- Navi AC命令
- 广域认证逃生配置命令
- ap-id（分支AP组视图）
- authentication-scheme（分支AP组视图）
- branch-group
- branch-group（AP视图）
- display ap authentication-file status
- display ap branch-group
- display branch-group
- display branch-group-user
- load-authentication-file
- local-eap-server authentication certificate ca
- local-eap-server authentication certificate local
- local-eap-server authentication eap-phase-one enable
- local-eap-server authentication eap-method
- local-eap-server authentication private-key
- local-user（分支AP组视图）
- 用户接入与认证命令
- AAA配置命令
- aaa
- aaa-author session-timeout invalid-value enable
- aaa abnormal-offline-record
- aaa offline-record
- aaa online-fail-record
- aaa-authen-bypass
- aaa-author-bypass
- aaa-author-cmd-bypass
- aaa-quiet administrator except-list
- access-user remote authen-fail
- accounting dual-stack separate
- accounting-copy radius-server
- accounting interim-fail
- accounting ip separate
- accounting realtime
- accounting start-fail
- accounting-mode
- accounting-scheme（AAA域视图）
- accounting-scheme（认证模板视图）
- accounting-scheme（AAA视图）
- admin-user privilege level
- administrator remote authen-fail
- authentication-mode（认证方案视图）
- authentication-scheme（AAA域视图）
- authentication-scheme（认证模板视图）
- authentication-scheme（AAA视图）
- authentication-type radius chap access-type admin
- authentication { roam-accounting | update-info-accounting | update-ip-accounting } * enable
- authentication roam-accounting update-session-mode
- authorization-cmd
- authorization-info check-fail policy
- authorization-mode
- authorization-modify mode
- authorization-scheme（AAA域视图）
- authorization-scheme（认证模板视图）
- authorization-scheme（AAA视图）
- cmd recording-scheme
- cut access-user
- display aaa
- display aaa configuration
- display aaa statistics access-type-authenreq
- display aaa statistics offline-reason
- display aaa-quiet administrator except-list
- display access-user（所有视图）
- display accounting-scheme
- display authentication-scheme
- display authorization-scheme
- display domain
- display local-access-code
- display local-user
- display local-user expire-time
- display local-aaa-user password policy
- display recording-scheme
- display remote-user authen-fail
- display service-scheme
- display local-eap-server configuration
- dns（业务方案视图）
- domain（AAA视图）
- domain（系统视图）
- domain-location
- domain-name-delimiter
- domainname-parse-direction
- idle-cut（业务方案视图）
- local-aaa-user wrong-password
- local-access-code
- local-aaa-user password policy access-user
- local-aaa-user password policy administrator
- local-user（AAA视图）
- local-user change-password
- local-user device-type
- local-user expire-date
- local-user password
- local-user service-type
- local-user time-range
- outbound recording-scheme
- password alert before-expire
- password alert original
- password expire
- password history record number
- permit-domain
- recording-mode hwtacacs
- recording-scheme
- redirect-acl
- remote-user authen-fail unblock
- reset aaa
- reset aaa statistics access-type-authenreq
- reset aaa statistics offline-reason
- reset access-user statistics
- reset local-user password history record
- security-name enable
- security-name-delimiter
- server no-response accounting
- server no-response authorization
- service-scheme（AAA域视图）
- service-scheme（AAA视图）
- state（AAA域视图）
- statistic enable（AAA域视图）
- statistic enable（认证模板视图）
- system recording-scheme
- user-group（AAA域视图）
- user-password complexity-check
- RADIUS配置命令
- called-station-id mac-format
- called-station-id wlan-user-format
- calling-station-id mac-format
- display radius-attribute
- display radius-attribute check
- display radius-attribute disable
- display radius-attribute translate
- display radius-server accounting-stop-packet
- display radius-server authorization configuration
- display radius-server configuration
- display radius-server dead-interval dead-count detect-cycle
- display radius-server item
- display radius-server max-unresponsive-interval
- display radius-server session-manage configuration
- display snmp-agent trap feature-name radius all
- radius-attribute check
- radius-attribute cut hw-portal-url
- radius-attribute disable
- radius-attribute nas-ip
- radius-attribute nas-ipv6
- radius-attribute nas-ip（系统视图）
- radius-attribute nas-ipv6（系统视图）
- radius-attribute service-type with-authenonly-reauthen
- radius-attribute set
- radius-attribute translate
- radius-reject local
- radius-server（AAA域视图）
- radius-server（认证模板视图）
- radius-server accounting
- radius-server accounting-stop-packet resend
- radius-server algorithm
- radius-server attribute message-authenticator access-request
- radius-server attribute translate
- radius-server authentication
- radius-server authorization
- radius-server authorization attribute-decode-sameastemplate
- radius-server authorization attribute-encode-sameastemplate
- radius-server authorization calling-station-id decode-mac-format
- radius-server authorization match-type
- radius-server dead-detect-condition by-server-ip
- radius-server dead-interval dead-count detect-cycle
- radius-server detect-server interval
- radius-server detect-server timeout
- radius-server detect-server up-server interval
- radius-server format-attribute
- radius-server framed-ip-address no-user-ip enable
- radius-server hw-ap-info-format include-ap-ip
- radius-server hw-dhcp-option-format
- radius-server max-unresponsive-interval
- radius-server nas-identifier-format
- radius-server nas-port-format
- radius-server nas-port-id-format
- radius-server retransmit timeout dead-time
- radius-server session-manage
- radius-server shared-key（RADIUS服务器模板视图）
- radius-server shared-key（系统视图）
- radius-server source ip-address
- radius-server support chargeable-user-identity
- radius-server template
- radius-server testuser
- radius-server traffic-unit
- radius-server user-name domain-included
- reset radius-server accounting-stop-packet
- snmp-agent trap enable feature-name radius
- test-aaa
- HWTACACS配置命令
- display hwtacacs-server accounting-stop-packet
- display hwtacacs-server template
- display hwtacacs-server template verbose
- hwtacacs enable
- hwtacacs-server
- hwtacacs-server（认证模板视图）
- hwtacacs-server accounting
- hwtacacs-server accounting-stop-packet resend
- hwtacacs-server authentication
- hwtacacs-server authentication user-name in-authentication-start
- hwtacacs-server authorization
- hwtacacs-server shared-key
- hwtacacs-server source-ip
- hwtacacs-server source-ipv6
- hwtacacs-server source-ip（系统视图）
- hwtacacs-server source-ipv6（系统视图）
- hwtacacs-server template
- hwtacacs-server timer quiet
- hwtacacs-server timer response-timeout
- hwtacacs-server traffic-unit
- hwtacacs-server user-name domain-included
- hwtacacs-user change-password hwtacacs-server
- reset hwtacacs-server accounting-stop-packet
- reset hwtacacs-server statistics
- HACA配置命令
- display haca-server accounting-stop-packet all
- display haca-server configuration
- display haca-server statistics
- haca enable
- haca-server（AAA域视图）
- haca-server accounting-stop-packet resend
- haca-server（认证模板视图）
- haca-server server-address
- haca-server source-ip
- haca-server template
- haca-server timer down-delay
- haca-server timer heart-beat
- haca-server timer reconnection
- haca-server timer register-sync
- haca-server timer response-timeout
- haca-server timer user-syn
- haca-server user-name
- reset haca-server statistics
- reset haca-server accounting-stop-packet all
- LDAP配置命令
- display ldap-server configuration
- display ldap-server template
- ldap-server authentication
- ldap-server authentication base-dn
- ldap-server authentication manager
- ldap-server authentication manager-anonymous enable
- ldap-server authentication manager-password
- ldap-server authentication manager-with-base-dn enable
- ldap-server authorization bind-user enable
- ldap-server group-filter
- ldap-server server-type
- ldap-server ssl version
- ldap-server template
- ldap-server user-filter
- ldap-server（AAA域视图）
- ldap-server（认证模板视图）
- AD配置命令
- ad-server authentication
- ad-server authentication base-dn
- ad-server authentication host-name
- ad-server authentication ldap-port
- ad-server authentication manager
- ad-server authentication manager-anonymous enable
- ad-server authentication manager-with-base-dn enable
- ad-server authorization bind-user enable
- ad-server cipher-suite
- ad-server group-filter
- ad-server template
- ad-server user-filter
- ad-server（AAA域视图）
- ad-server（认证模板视图）
- display ad-server template
- 内置EAP配置命令
- display eap-server-template
- eap-server-template name
- local-eap-server authentication certificate
- local-eap-server authentication eap-server-template
- local-eap-server authentication eap-phase-one enable
- local-eap-server authentication method
- local-eap-server authentication private-key
- local-eap-server configuration reload
- NAC配置命令
- access-domain
- acl-id（用户组视图）
- authentication event action authorize
- authentication event authen-server-up action re-authen
- authentication event client-no-response action authorize
- authentication event portal-server-down action authorize
- authentication event portal-server-up action re-authen
- authentication https-redirect enable
- authentication no-ip-check
- authentication ip-address in-accounting-start
- authentication ip-conflict-check enable
- authentication roam pre-authen mac-authen enable
- authentication single-access
- authentication speed-limit auto
- authentication timer re-authen
- authentication user-alarm percentage
- authentication-profile（VAP模板视图）
- authentication-profile（系统视图）
- authentication portal-ip-trigger
- authentication termination-action reauthenticate
- authorize
- device-type
- device-profile
- device-sensor dhcp option
- display access-user
- display access-user-num
- display access-user roam-table
- display ap port-auth-state
- display authentication-profile configuration
- display authentication user-alarm configuration
- display device-profile
- display dot1x
- display dot1x-access-profile configuration
- display dot1x quiet-user
- display dot1x-client-profile configuration
- display free-rule-template configuration
- display mac-access-profile configuration
- display mac-authen
- display mac-authen quiet-user
- display portal
- display portal local-server connect
- display portal local-server
- display portal local-server page-information
- display portal user-logout
- display portal-access-profile configuration
- display portal quiet-user
- display portal url-encode configuration
- display server-detect state
- display url-template
- display user-group
- display web-auth-server configuration
- display webmng configuration
- domain mac-authen force
- dot1x abnormal-track cache-record-num
- dot1x authentication-method
- dot1x eap-notify-packet
- dot1x quiet-period
- dot1x quiet-times
- dot1x reauthenticate mac-address
- dot1x reauthenticate
- dot1x retry
- dot1x timer
- dot1x timer tx-period
- dot1x timer quiet-period
- dot1x-access-profile（认证模板视图）
- dot1x-access-profile（系统视图）
- dot1x-client-profile（AP有线口模板视图）
- dot1x-client-profile（系统视图）
- eap-method
- enable（终端类型识别模板视图）
- free-rule
- free-rule-template（认证模板视图）
- free-rule-template（系统视图）
- http parse user-agent enable
- http get-method enable
- http-method post
- if-match
- rule（终端类型识别模板视图）
- load-authentication-file（WLAN视图）
- mac-access-profile（认证模板视图）
- mac-access-profile（系统视图）
- mac-authen authentication-method
- mac-authen quiet-times
- mac-authen reauthenticate mac-address
- mac-authen reauthenticate
- mac-authen timer quiet-period
- mac-authen timer reauthenticate-period
- mac-authen username
- parameter
- pki key-pair-with-cert
- port（Portal服务器模板视图）
- portal auth-network
- portal captive-adaptive enable
- portal captive-bypass enable
- portal http-proxy-redirect enable
- portal local-server access-code
- portal local-server ad-image load
- portal local-server anonymous
- portal local-server authentication-method
- portal local-server background-color
- portal local-server background-image load
- portal local-server enable
- portal local-server ip
- portal local-server keep-alive
- portal local-server load
- portal local-server logo load
- portal local-server max-user
- portal local-server
- portal local-server page-text load
- portal local-server policy-text load
- portal local-server redirect-url enable
- portal local-server timer session-timeout
- portal local-server url
- portal local-server syslog-limit enable
- portal local-server syslog-limit period
- portal local-server default-language
- portal logout different-server enable
- portal logout resend timeout
- portal max-user
- portal pass dns enable
- portal quiet-period
- portal quiet-times
- portal redirect-http-port
- portal redirect js enable
- portal redirect-302 enable
- portal timer quiet-period
- portal tunnel-forward ip
- portal url-encode enable
- portal user-alarm percentage
- portal user-roam-out reply enable
- portal-access-profile（认证模板视图）
- portal-access-profile（系统视图）
- portal web-authen-server
- force-push
- protocol
- priority
- remote-access-user manage
- reset dot1x statistics
- reset mac-authen statistics
- server-detect
- server-detect type
- server-ip（Portal服务器模板视图）
- shared-key（Portal服务器模板视图）
- source-interface(Portal服务器模板视图)
- source-ip（Portal服务器模板视图）
- url（URL模板视图）
- url（Portal服务器模板视图）
- url-parameter mac-address format
- url-parameter
- url-parameter set
- url-template name
- url-template（Portal服务器模板视图）
- user-group
- user-isolated
- user-sync
- user-vlan
- web-auth-server listening-port
- web-auth-server（Portal接入模板视图）
- web-auth-server reply-message
- web-auth-server（系统视图）
- web-auth-server source-ip
- web-auth-server version
- web-description
- web-redirection disable（Portal服务器模板视图）
- 安全策略配置命令
- display references security-profile
- display security-profile
- display wlan ppsk-user
- display wlan wapi certificate
- pmf
- ppsk-user
- security dot1x
- security dpsk
- security open
- security psk
- security wapi
- security wep
- security wpa2-wpa3 psk-sae
- security wpa3 dot1x
- security wpa3 sae
- security-profile（WLAN视图）
- security-profile（VAP模板视图）
- wapi asu
- wapi bk
- wapi cert-retrans-count
- wapi import certificate
- wapi import private-key
- wapi key-update
- wapi msk
- wapi sa-timeout
- wapi usk
- wep default-key
- wep key
- wpa ptk-update enable
- wpa ptk-update ptk-update-interval
- STA黑白名单配置
- 安全命令
- ACL配置命令
- 本机防攻击配置命令
- application-apperceive
- auto-defend enable
- auto-defend action
- auto-defend alarm enable
- auto-defend alarm threshold
- auto-defend protocol
- auto-defend threshold
- auto-defend trace-type
- cpu-defend application-apperceive enable
- cpu-defend-policy
- cpu-defend policy
- deny
- description（防攻击策略视图）
- display auto-defend attack-source
- display auto-defend configuration
- display cpu-defend configuration
- display cpu-defend policy
- display cpu-defend statistics
- packet-type
- packet-type priority
- rate-limit all-packets
- reset auto-defend attack-source
- reset cpu-defend statistics
- track system-load enable
- 攻击防范配置命令
- anti-attack abnormal enable
- anti-attack enable
- anti-attack fragment enable
- anti-attack fragment car
- anti-attack icmp-flood enable
- anti-attack icmp-flood car
- anti-attack tcp-syn enable
- anti-attack tcp-syn car
- anti-attack udp-flood enable
- anti-attack urpf
- display anti-attack statistics
- reset anti-attack statistics
- 流量抑制配置命令
- ARP安全配置命令
- arp anti-attack check user-bind alarm enable
- arp anti-attack check user-bind alarm threshold
- arp anti-attack check user-bind check-item（接口视图）
- arp anti-attack check user-bind check-item（VLAN视图）
- arp anti-attack check user-bind enable
- arp anti-attack entry-check enable
- arp anti-attack log-trap-timer
- arp anti-attack packet-check sender-mac
- arp anti-attack rate-limit
- arp anti-attack rate-limit alarm enable
- arp anti-attack rate-limit alarm threshold
- arp anti-attack rate-limit enable
- arp gratuitous-arp send enable
- arp gratuitous-arp send interval
- arp learning strict（接口视图）
- arp learning strict（系统视图）
- arp speed-limit flood-rate
- arp speed-limit source-mac
- arp speed-limit source-ip
- arp validate
- arp-fake expire-time
- arp-limit
- arp-miss anti-attack rate-limit
- arp-miss anti-attack rate-limit alarm enable
- arp-miss anti-attack rate-limit alarm threshold
- arp-miss anti-attack rate-limit enable
- arp-miss speed-limit source-ip
- display arp anti-attack check user-bind interface
- display arp anti-attack configuration
- display arp flood statistics
- display arp learning strict
- display arp packet statistics
- display arp-limit
- reset arp anti-attack statistics check user-bind
- reset arp anti-attack statistics rate-limit
- reset arp flood statistics
- reset arp packet statistics
- DHCP Snooping配置命令
- arp dhcp-snooping-detect enable
- dhcp option82 enable
- dhcp option82 encapsulation
- dhcp option82 format
- dhcp option82 subscriber-id format
- dhcp option82 vendor-specific format
- dhcp server detect
- dhcp snooping alarm dhcp-rate enable
- dhcp snooping alarm dhcp-rate threshold
- dhcp snooping alarm enable
- dhcp snooping alarm threshold
- dhcp snooping check dhcp-giaddr enable
- dhcp snooping check dhcp-rate
- dhcp snooping check dhcp-rate enable
- dhcp snooping check dhcp-chaddr enable
- dhcp snooping check dhcp-request enable
- dhcp snooping disable
- dhcp snooping enable
- dhcp snooping enable no-user-binding
- dhcp snooping max-user-number
- dhcp snooping trusted
- dhcp snooping user-alarm percentage
- dhcp snooping user-bind autosave
- dhcp snooping user-transfer enable
- dhcpv6 snooping user-bind detect confirm-client enable
- dhcpv6 snooping user-bind detect retransmit
- display dhcp option82 configuration
- display dhcp snooping
- display dhcp snooping configuration
- display dhcp snooping statistics
- display dhcpv6 snooping statistics
- display dhcp snooping user-bind
- display dhcpv6 snooping user-bind
- reset dhcp snooping statistics
- reset dhcp snooping user-bind
- reset dhcpv6 snooping statistics
- ND Snooping配置命令
- display nd snooping configuration
- display nd snooping prefix
- display nd snooping statistics
- display nd snooping user-bind
- nd snooping alarm binding-table check enable
- nd snooping alarm binding-table check threshold
- nd snooping check enable
- nd snooping check dad-ns retransmit-rate rate
- nd snooping check dad-ns retransmit-rate enable
- nd snooping enable
- nd snooping enable dhcpv6 only
- nd snooping max-user-number
- nd snooping static-prefix
- nd snooping trusted
- nd snooping trusted dhcpv6 only
- nd snooping user-alarm percentage
- nd snooping wait-time life-time
- nd user-bind detect
- nd user-bind detect enable
- reset nd snooping prefix
- reset nd snooping statistics
- reset nd snooping user-bind
- SAVI配置命令
- IPSG配置命令
- URPF配置命令
- PKI配置命令
- auto-enroll
- ca id
- cdp-url
- certificate-check
- certificate auto-update enable
- certificate update expire-time
- cmp-request authentication-cert
- cmp-request ca-name
- cmp-request entity
- cmp-request message-authentication-code
- cmp-request origin-authentication-method
- cmp-request realm
- cmp-request rsa local-key-pair
- cmp-request server url
- cmp-request verification-cert
- common-name
- country（PKI实体视图）
- crl auto-update enable
- crl cache
- crl http
- crl scep
- crl update-period
- display pki ca-capability
- display pki cert-req
- display pki certificate
- display pki certificate built-in-ca
- display pki certificate enroll-status
- display pki certificate filename
- display pki cmp statistics
- display pki credential-storage-path
- display pki crl
- display pki entity
- display pki ocsp cache detail
- display pki ocsp cache statistics
- display pki ocsp server down-information
- display pki realm
- display pki rsa built-in-ca public
- display pki rsa local-key-pair
- enrollment self-signed
- enrollment-request signature message-digest-method
- enrollment-url
- entity
- fingerprint
- fqdn
- ip-address
- key-usage
- locality
- ocsp nonce enable
- ocsp signature enable
- ocsp url
- ocsp-url from-ca
- organization-unit
- organization
- password（PKI域视图）
- pki built-in-ca match-rsa-key
- pki cmp certificate-request session
- pki cmp initial-request session
- pki cmp keyupdate-request session
- pki cmp session
- pki create-certificate
- pki delete-certificate
- pki delete-certificate built-in-ca
- pki delete-crl
- pki enroll-certificate
- pki entity
- pki export-certificate
- pki export-certificate default
- pki export built-in-ca rsa-key-pair
- pki export rsa-key-pair
- pki file-format
- pki generate built-in-ca certificate
- pki get-certificate
- pki get-crl
- pki http
- pki import-certificate
- pki import-certificate built-in-ca
- pki import-crl
- pki import built-in-ca rsa-key-pair
- pki import rsa-key-pair
- pki match-rsa-key
- pki ocsp response cache enable
- pki ocsp response cache number
- pki ocsp response cache refresh interval
- pki realm（系统视图）
- pki rsa built-in-ca
- pki rsa local-key-pair create
- pki rsa local-key-pair destroy
- pki set-certificate expire-prewarning
- pki validate ocsp-server-certificate enable
- pki validate-certificate
- reset pki cmp statistics
- reset pki ocsp response cache
- reset pki ocsp server down-information
- rsa local-key-pair
- source
- state（PKI实体视图）
- undo pki cmp poll-request session
- SSL配置命令
- HTTPS配置命令
- Keychain配置命令
- URL过滤配置命令
- add { blacklist | whitelist }（URL过滤模板视图）
- add referer-host
- default action（URL过滤模板视图）
- defence engine enable
- defence engine log timeout
- defence-profile（接口视图）
- defence-profile（系统视图）
- defence-profile（用户组视图）
- defence-profile（VAP模板视图）
- display references defence-profile
- display defence-profile
- description（URL过滤模板视图）
- display profile type url-filter
- display url-filter statistics
- profile type url-filter copy
- profile type url-filter（攻击防御模板视图）
- profile type url-filter name
- referer-filter whitelist-all enable
- rename（URL过滤模板视图）
- reset url-filter statistics
- url-filter anti-bypass enable
- url-filter high-performance mode enable
- url-filter https-filter consistency-check enable
- IAE高级配置命令
- display engine information
- display engine session statistics
- display engine session table
- display engine statistics
- display fragment-reassemble configuration
- display fragment-reassemble session table
- display fragment-reassemble statistics
- display profile
- display stream-reassemble configuration
- decoding uri-cache
- engine configuration commit
- engine enhanced-detection
- engine http status-code
- engine log enable
- engine pass-through enable
- fragment-reassemble enable
- fragment-reassemble overflow-mode
- fragment-reassemble user-configure
- reset engine session statistics
- reset engine session table
- reset engine statistics
- reset fragment-reassemble statistics
- stream-reassemble enable
- stream-reassemble enhanced-mode
- stream-reassemble overflow-mode
- stream-reassemble overlap-mode
- stream-reassemble session-cache
- stream-reassemble session-timeout
- stream-reassemble tcp-option check
- stream-reassemble timestamp check
- stream-reassemble user-configure defense-check
- 升级特征库配置命令
- display update configuration
- display update host source
- display update information all-sdb
- display update status
- display version（引擎和特征库）
- update abort
- update apply
- update confirm
- update download-server aging-time
- update force apply
- update force local
- update force online
- update force restore sdb-default
- update force rollback
- update host source
- update local
- update online
- update online-mode
- update proxy
- update proxy enable
- update restore sdb-default
- update rollback
- update schedule
- update schedule enable
- update schedule retry-download interval
- update schedule retry-load interval
- update server
- 入侵防御配置命令
- action（IPS签名过滤器视图）
- action（IPS自定义签名视图）
- application（IPS签名过滤器视图）
- assoc-check enable
- category（IPS签名过滤器视图）
- check（自定义签名规则视图）
- cnc domain-filter enable
- cnc domain-filter exception domain-name
- collect-attack-evidence enable（入侵防御模板视图）
- condition（自定义签名规则视图）
- condition associated（自定义签名规则视图）
- condition move（自定义签名规则视图）
- condition value（自定义签名规则视图）
- context-awareness enable
- description（入侵防御模板视图）
- description（IPS自定义签名视图）
- destination-ip（自定义签名规则视图）
- destination-port（自定义签名规则视图）
- display cnc domain-filter domain statistics
- display cnc domain-filter exception
- display cnc domain-filter statistics
- display cnc information
- display context-awareness information statistics
- display context-awareness statistics
- display ips signature-id rule
- display ips signature-state
- display ips statistics
- display ips-signature
- display ips signature-action
- display ips-signature cve-id
- display ips-signature statistics
- display ips-signature vendor-id
- display profile type ips
- dns domain check
- dns domain length check
- dns malformed-packet check
- dns request-type check
- dns session request-times check
- exception ips-signature-id
- http multi-host check
- http ssh-over-http check
- http x-forwarded-for check
- http x-forwarded-for whitelist
- http x-online-host blacklist
- http x-online-host check
- ips associated pre-defined
- ips collect-attack-evidence max-session-number
- ips log based-on-session
- ips log extend enable
- ips log merge enable
- ips signature-action
- ips signature-id
- ips signature-state
- name（IPS自定义签名视图）
- os（IPS签名过滤器视图）
- profile type ips（攻击防御模板视图）
- profile type ips copy
- profile type ips name
- protocol（IPS签名过滤器视图）
- protocol（IPS自定义签名视图）
- rename（入侵防御模板视图）
- rename（IPS签名过滤器视图）
- rename（自定义签名规则视图）
- reset cnc domain-filter statistics
- reset context-awareness information statistics
- reset context-awareness statistics
- reset ips statistics
- reset ips-signature statistics
- rule name（IPS自定义签名视图）
- scope（自定义签名规则视图）
- severity（IPS签名过滤器视图）
- severity（IPS自定义签名视图）
- signature-set move
- signature-set name
- source-ip（自定义签名规则视图）
- source-port（自定义签名规则视图）
- target（IPS签名过滤器视图）
- target（IPS自定义签名视图）
- 反病毒配置命令
- av extract hash enable
- av log merge enable
- collect-attack-evidence enable（反病毒模板视图）
- description（反病毒模板视图）
- display av statistics
- display av-signature
- display profile type av
- exception application
- exception av-signature-id
- ftp-detect
- http-detect
- imap-detect
- nfs-detect
- pop3-detect
- profile type av copy
- profile type av（攻击防御模板视图）
- profile type av name
- rename（反病毒模板视图）
- reset av statistics
- smb-detect
- smtp-detect
- IAE全局配置命令
- 业务与管理隔离配置命令
- QoS命令
- MQC配置命令
- classifier behavior
- deny | permit
- display acl vlan-division
- display traffic behavior
- display traffic classifier
- display traffic policy
- display traffic policy statistics
- display traffic-policy applied-record
- if-match 8021p
- if-match acl
- if-match any
- if-match destination-mac
- if-match dscp
- if-match inbound-interface
- if-match ip-precedence
- if-match l2-protocol
- if-match protocol
- if-match source-mac
- if-match tcp
- if-match vlan-id
- redirect interface
- redirect ip-nexthop
- redirect ipv6-nexthop
- remark 8021p
- remark dscp
- remark local-precedence
- reset traffic policy statistics
- statistic enable（流行为视图）
- traffic behavior
- traffic classifier
- traffic policy
- traffic-policy（接口视图）
- 优先级映射配置命令
- 流量监管和流量整形命令
- 拥塞避免和拥塞管理命令
- 基于ACL的简化流策略命令
- WLAN QoS配置命令
- airtime-fair-schedule enable
- car（QoS模板视图）
- description（QoS模板视图）
- display qos car
- display qos-profile
- display references traffic-profile
- display references user-profile
- display traffic-profile
- display traffic-remark applied-record
- display user-profile
- display ucc-profile
- display ucc sessions
- display video-aware-list
- display voice-aware-list
- game-turbo disable
- skype4b-app-share remark
- skype4b-file-transfer remark
- skype4b listener
- skype4b-video remark
- skype4b-voice remark
- multimedia-air-optimize enable
- multimedia-air-optimize threshold
- priority-map downstream dot1p
- priority-map downstream dscp
- priority-map downstream trust
- priority-map tunnel-upstream dot11e dscp
- priority-map tunnel-upstream dot11e dot1p
- priority-map tunnel-upstream dscp dot1p
- priority-map tunnel-upstream dscp tunnel-dscp
- priority-map tunnel-upstream trust
- priority-map upstream trust
- qos car
- qos car（用户模板视图）
- qos-profile
- qos car（SSID模板视图）
- qos-profile（用户组视图）
- rate-limit
- rate-limit client dynamic
- rate-limit client dynamic disable
- remark 8021p（QoS模板视图）
- remark dscp（QoS模板视图）
- remark local-precedence（QoS模板视图）
- svp-voice enable
- service-experience-analysis enable
- service-experience-analysis sip-snooping port
- traffic-filter（流量模板视图）
- traffic-profile（WLAN视图）
- traffic-profile（VAP模板视图）
- traffic-remark（流量模板视图）
- ucc log enable
- ucc-profile（WLAN视图）
- ucc-profile（VAP模板视图）
- user-isolate（流量模板视图）
- user-priority（用户模板视图）
- user-profile（VAP模板视图）
- user-profile
- video-aware app-protocol disable
- video-aware disable
- video-aware-scan
- voice-aware app-protocol disable
- voice-aware disable
- voice-aware-scan
- wmm edca-ap
- wmm edca-client（SSID模板视图）
- wmm disable
- wmm mandatory enable
- HQoS配置命令
- DFI配置命令
- SAC配置命令
- application-group car（智能应用控制模板视图）
- application-group deny（智能应用控制模板视图）
- application-group remark（智能应用控制模板视图）
- application name cache type aging-time
- category sub-category
- description（自定义应用规则视图）
- description（自定义应用视图）
- detect max-bytes
- detect max-packets
- detect max-time
- detect uni-direction
- display application
- display application name aging-time
- display defence engine configuration
- display references sac-profile
- display references ucc-profile
- display sac application-group
- display sac information
- display sac-profile
- display sac application-list
- display sac protocol-statistic
- ip-address（自定义应用规则视图）
- destination-port（自定义应用规则视图）
- port-identification packet-number-threshold
- protocol（自定义应用规则视图）
- reset sac protocol-statistic
- rule name（自定义应用视图）
- sa
- sac-profile
- sac-profile（用户组视图）
- sac-profile（VAP模板视图）
- signature（自定义应用规则视图）
- user-defined-application name
- user-protocol-statistic enable
- vap-protocol-statistic enable
- 网络管理与监控命令
- SNMP配置命令
- display snmp-agent community
- display snmp-agent extend error-code status
- display snmp-agent group
- display snmp-agent local-engineid
- display snmp-agent mib-view
- display snmp-agent statistics
- display snmp-agent sys-info
- display snmp-agent target-host
- display snmp-agent trap all
- display snmp-agent trap feature-name all
- display snmp-agent trap feature-name snmp all
- display snmp-agent trap-source
- display snmp-agent usm-user
- enable snmp trap updown
- snmp-agent
- snmp-agent community
- snmp-agent community complexity-check disable
- snmp-agent extend error-code enable
- snmp-agent group
- snmp-agent local-engineid
- snmp-agent mib-view
- snmp-agent protocol get-bulk timeout
- snmp-agent protocol source-interface
- snmp-agent sys-info
- snmp-agent target-host trap-hostname
- snmp-agent target-host trap-paramsname
- snmp-agent trap disable
- snmp-agent trap enable
- snmp-agent trap enable feature-name
- snmp-agent trap enable feature-name snmp
- snmp-agent trap life
- snmp-agent trap queue-size
- snmp-agent trap source
- snmp-agent usm-user
- RMON配置命令
- display rmon alarm
- display rmon event
- display rmon eventlog
- display rmon history
- display rmon prialarm
- display rmon statistics
- display rmon2 hlhostcontroltable
- display rmon2 nlhosttable
- display rmon2 protocoldirtable
- display snmp-agent trap feature-name rmon all
- rmon alarm
- rmon event
- rmon history
- rmon prialarm
- rmon statistics
- rmon2 hlhostcontroltable
- rmon2 protocoldirtable
- rmon-statistics enable
- snmp-agent trap enable feature-name rmon
- 镜像配置命令
- 性能管理命令
- binding
- display pm brief
- display pm measure-info
- display pm statistics
- display pm statistics-file
- display pm statistics-task
- display snmp-agent trap feature-name pm all
- measure disable
- path
- pm
- pm-server
- protocol
- record-file disable
- record-interval
- reset pm current-data
- retry
- sample-interval
- snmp-agent trap enable feature-name pm
- statistics enable
- statistics-cycle
- statistics-task
- threshold-alarm enable
- threshold-alarm measure
- upload
- upload auto
- upload-config
- username password
- Ping和Tracert配置命令
- LLDP配置命令
- display lldp local
- display lldp neighbor
- display lldp neighbor brief
- display lldp statistics
- display lldp tlv-config
- display snmp-agent trap feature-name lldptrap all
- lldp clear neighbor
- lldp dot3-tlv power
- lldp enable（接口视图）
- lldp enable（系统视图）
- lldp management-address
- lldp message-transmission delay
- lldp message-transmission hold-multiplier
- lldp message-transmission interval
- lldp restart-delay
- lldp tlv-enable
- lldp tlv-enable legacy-tlv four-pair-power
- lldp trap-interval
- reset lldp statistics
- snmp-agent trap enable feature-name lldptrap
- 报文捕获配置命令
- 业务诊断配置命令
- NetStream配置命令
- collect counter
- collect interface
- display ip netstream
- display ip netstream statistics
- ip netstream export host
- ip netstream export index-switch
- ip netstream export source
- ip netstream export version
- ip netstream record
- ip netstream record（VAP模板视图）
- ip netstream sampler
- ip netstream tcp-flag enable
- ip netstream timeout active
- ip netstream timeout inactive
- ip netstream（VAP模板视图）
- match
- reset ip netstream cache
- reset ip netstream statistics
- 管理上网服务场所信息命令
- address
- business-time
- coordinate（上网服务场所视图）
- display references report-server
- display wireless-access-specification configuration
- display wireless-access-specification site
- display wireless-access-specification report-server
- display wireless-access-specification vendor-info
- legal-person
- location
- name
- network（上网服务场所视图）
- report
- report enable
- report item null-value
- report-server name（无线上网规范视图）
- report-server
- site（无线上网规范视图）
- site
- wireless-access-specification
- wireless-access-specification report
- 第三方数据采集配置命令
- WMI命令
- ap log module
- collect-item（WMI视图）
- collect-item（WMI模板视图）
- collect-location-data enable
- collect-location-data rssi-threshold
- display kpi status
- display references wmi-server
- display wmi client status
- display wmi status
- display wmi-server
- keepalive（WMI视图）
- keepalive（WMI模板视图）
- kpi disable
- log module
- max-packet-size（WMI视图）
- max-packet-size（WMI模板视图）
- mdns-snooping enable
- report-interval（WMI视图）
- report-interval（WMI模板视图）
- server（WMI视图）
- server（WMI模板视图）
- wmi-server（AP系统模板视图）
- wmi-server（系统视图）
- wmi-server（WLAN视图）
