Monitoring the Running of BFD

[复制链接]
mhkabir1952   钻石会员    发表于 2014-5-28 23:29:44   最新回复:2015-12-17 20:52:41

This describes how to monitor the running status of BFD in routine maintenance.

Context

In routine maintenance, you can run the following commands in random view to check the running status of BFD. For details on the related commands of BFD, refer to Quidway Eudemon 8080E/8160E Command Reference.


Procedure of Monitoring the Running of BFD are as follows:

  • Run:

    display bfd configuration { all | static [ name cfg-name ] | dynamic | peer-ip peer-ip [ vpn-instance vpn-instance-name ] | discriminator local discr-value } [ verbose ]

    The configuration of the BFD session is displayed.

  • Run:

    display bfd interface [ interface-type interface-number ]

    The information about the enabled BFD interface is displayed.

  • Run:

    display bfd session { all | static | dynamic | discriminator discr-value | peer-ip peer-ip [ vpn-instance vpn-instance-name ] } [ verbose ] [ slot slot-id ]

    The information about the BFD session is displayed.

  • Run:

    display bfd statistics [ slot slot-id ]

    The global statistics on BFD are displayed.

  • Run:

    display bfd statistics session { all | static | dynamic | discriminator discr-value | peer-ip peer-ip [ vpn-instance vpn-instance-name ] } [ slot slot-id ]

    The statistics on the BFD session are displayed.

foisal   金牌会员    发表于 2014-5-29 19:35:29

very nice post
快速回复 返回顶部