Fault Handling: PS Attach Failure Caused by the Enabling of the RAU Authenticati

[复制链接]
selim.hasan   钻石会员    发表于 2014-9-20 14:17:58   最新回复:2018-05-30 13:44:35

PS Attach Failure Caused by the Enabling of the RAU Authentication Function
Fault Handling procedure:
p Open the subscriber signaling tracking, check the cause of attach rejected:
In this case, the SGSN sends Attach Reject message, but the HLR does not return Insert Subscriber
Data message. Attach Reject is ported with "
Protocol error, unspecified (111)" cause value. 
跳转到指定楼层
mostafizur.r   高级会员    发表于 2014-9-21 20:47:15

helpful doc. thanks 
tariqul.i   中级会员    发表于 2014-9-24 15:48:14

good experience share....
mehedi_hassan   银牌会员    发表于 2014-9-24 17:30:22

nice fault handling doc
faizur   银牌会员    发表于 2014-9-27 23:33:38

good document.
ahleemon   白金会员    发表于 2014-9-27 23:43:19

very nice
selim.hasan   钻石会员    发表于 2014-9-28 16:03:42

thanks everyone...:)
user_2837311   钻石会员    发表于 2018-5-30 13:44:35

useful document, thanks
Have a nice day
快速回复 返回顶部