Bandwidth Control Rule Ineffective in GGSN9811

abrahim   钻石会员    发表于 2014-5-31 16:18:25   最新回复:2014-05-31 20:35:00

User activation succeeded, GGSN received rules from UPCC, but the bandwidth control (FUP service, for example) does not take effect.

Possibility 1: Rule failed installing on GGSN

Step 2: confirm rule name is unique in CCA message

Step 3: check the rule priority
Rule priority:
nThe less the value, the higher the priority
nPredefined rules are treated the same with dynamic rules
nFor rules with same priority, dynamic rules are preferred.
nFor dynamic rules with the same priority, the latest one is preferred.
nThe priority for predefined rules is unique.
nPredefined group stand for multiple predefined rules, a rule in the group will be eventually selected.

Alaul   钻石会员    发表于 2014-5-31 17:42:27

Very useful document.............
mjali   白金会员    发表于 2014-5-31 18:48:50

It will enrich my knowledge..carry on......
zsiddique   白金会员    发表于 2014-5-31 20:35:00

Yes you are right the less value is the hight priority
快速回复 返回顶部