Location Reporting Control in PS

[复制链接]
selim.hasan   钻石会员    发表于 2014-5-24 23:19:19   最新回复:2018-05-26 13:33:52

The CN initiates the procedure by sending a LOCATION REPORTING CONTROL message.

The Request Type IE shall indicate to the serving RNC whether:

-  to report directly;
-  to stop a direct report;
-   to report upon change of Service area, or

-  to stop reporting at change of Service Area.

 

The Request Type IE shall also indicate what type of location information the serving RNC shall report. The location information is either of the following types:

-  Service Area Identifier, or
-  Geographical area, including geographical coordinates with or without requested accuracy.Any of the Vertical Accuracy Code IE, ResponseTime IE, Positioning Priority IE or Client Type IE shall be included according to the following rules:
-  Vertical Accuracy Code shall be included, if available, in connection with Geographical Area,

-  Response time shall be included, if available, in connection with request for start of
direct reporting of Geographical Area,

-  Client type shall be included in connection with request for start of direct reporting
of Geographical Area and, if available, in request for direct reporting of SAI,


-  Positioning Priority shall be included, if available, in connection with request for startof direct reporting or in connection with request for start of reporting upon change of Service Area.

跳转到指定楼层
ahleemon   白金会员    发表于 2014-5-26 14:37:55

good document. thanks!
Armetta   钻石会员    发表于 2014-5-29 17:35:11

This document is very well done

shain   金牌会员    发表于 2014-5-29 19:04:56

very useful document for my regular O& M activity. Thanks.
user_2837311   钻石会员    发表于 2018-5-26 13:33:52

useful document, thanks
Have a nice day
快速回复 返回顶部