CX11x, CX31x, CX710 (Earlier Than V6.03) , and CX91x Series Switch Modules V100R001C10 Command Reference 15
This document provides the configuration commands of each feature supported by the CX11x&CX31x&CX91x series switches module, including the syntax, view, default level, description, parameters, usage guideline, related commands, and example of each command.
display stp vlan
Function
The display stp vlan command displays the STP status on an interface added to a specified VLAN.
Parameters
Parameter | Description | Value |
---|---|---|
vlan-id | Displays the STP status on an interface added to a specified VLAN. |
The value is an integer ranging from 1 to 4094, except reserved VLAN IDs, which can be configured using the vlan reserved command. |
Usage Guidelines
After an interface is added to a VLAN, the display stp vlan command can be used to the display the STP status on the interface. In this case, the mapping between VLANs and instances does not need to be concerned with.
Example
# Display the STP status on an interface added to a specified VLAN.
<HUAWEI> display stp vlan 1
ProcessId InstanceId Port Role State ---------------------------------------------------------------------- 0 0 10GE1/0/1 DESI forwarding
Table 5-48 Description of the display stp vlan command output
Item |
Description |
---|---|
ProcessId |
Process ID |
InstanceId. |
Instance ID |
Port |
Interface |
Role |
Interface role |
State |
Interface status |
Document ID:EDOC1000041693
Views:3451275
Downloads:1874
Average rating:5.0Points