S12700 and S12700E Series Agile Switches License Usage Guide

License Control Items

License Control Items

The S12700 series switches support the ACU2, NGFW module, and IPS module. For their license information, see the ACU2 Product Document, NGFW Module Product Document, and IPS Module Product Document separately.

You can run the display license command to view the license control items (for example, enhanced VXLAN) that have been loaded to the device.

Table 3-1 Function license control items supported by the S12700

Part Number

License Control Item

External Model

Product Model and Minimum Version

Before License Activation

After License Activation

81400500

MPLS Function License

ET1SMPLS0000

S12708, S12712: V200R005

S12704: V200R008

S12710: V200R010

The function can be configured, but cannot take effect.

The function is available.

81400502

IPv6 Function License

ET1SIPV60000

S12708, S12712: V200R005

S12704: V200R008

S12710: V200R010

The function can be configured, but cannot take effect, for example, the IPv6 protocol status is Down.

The function is available.

81400501

NQA Function License

ET1SNQA00000

S12708, S12712: V200R005

S12704: V200R008

S12710: V200R010

The function can be configured, but cannot take effect.

The function is available.

81400503

Service Splitting Platform Function License

ET1SSSP00000

S12708, S12712: V200R005

S12704: V200R008

S12710: V200R010

The function can be configured, but cannot take effect.

The function is available.

81400653

SVF Function License

ET1SSVFF0000

S12708, S12712: V200R007

S12704: V200R008

S12710: V200R010

The SVF function is not supported.

The function is available.

81401077

VXLAN Enhanced Function License

ET1SVXLAN000

V200R012

Distributed and centralized VXLAN gateway deployment using BGP EVPN is not supported.

NOTE:

No license is required for centralized VXLAN gateway deployment in static mode.

The function of deploying distributed and centralized VXLAN gateways using BGP EVPN is license controlled. The switches support this function once the corresponding license is purchased.

Table 3-2 Function license control items supported by the S12700E

Part Number

License Control Item

External Model

Minimum Version

Before License Activation

After License Activation

81401373

VXLAN Enhanced Function License

L-VxLAN-S127E

V200R019C00

Distributed and centralized VXLAN gateway deployment using BGP EVPN is not supported.

NOTE:

No license is required for centralized VXLAN gateway deployment in static mode.

The function of deploying distributed and centralized VXLAN gateways using BGP EVPN is license controlled. The switches support this function once the corresponding license is purchased.

Table 3-3 Resource license control items supported by the S12700

Part Number

License Control Item

External Model

Product Model and Minimum Version

Before License Activation

After License Activation

82400519

X-series LPU FIB Resource License-128K

ET1SFIB128K0

Cards supporting this License: X1E card, X2H card, X5E card, and X5H card

For the default specifications, contact Huawei local office.

The number of resources depends on licenses. For the maximum number of IPv4 FIB entries, contact Huawei local office.

82400520

X-series LPU FIB Resource License-512K

ET1SFIB512K0

Cards supporting this License: X1E card, X2H card, X5E card, and X5H card

For the default specifications, contact Huawei local office.

The number of resources depends on licenses. For the maximum number of FIB entries supported by a card, contact Huawei local office.

82400521

PPPoE Access Subscriber Resource License-4K (with the X-series LPU used)

ET1SPPPOE4K0

S12708, S12712: V200R005

S12704: V200R008

S12710: V200R010

After an X series card is used, a device supports PPPoE user access. For the default specifications, contact Huawei local office.

The number of resources depends on licenses. For the maximum number of PPPoE access users, contact Huawei local office.

82400522

PPPoE Access Subscriber Resource License-8K (with the X-series LPU used)

ET1SPPPOE8K0

82400523

PPPoE Access Subscriber Resource License-16K (with the X-series LPU used)

ET1SPPPOE16K

82400503

WLAN Access Controller AP Resource License-512AP (with the X-series LPU used)

ET1SWL512AP0

S12708, S12712: V200R005

S12704: V200R008

S12710: V200R010

By default, a device supports a maximum of 16 APs.

The number of resources depends on licenses. For the maximum number of access APs, contact Huawei local office.

82400504

WLAN Access Controller AP Resource License-128AP (with the X-series LPU used)

ET1SWL128AP0

82400505

WLAN Access Controller AP Resource License-64AP (with the X-series LPU used)

ET1SWL64AP00

82400506

WLAN Access Controller AP Resource License-16AP (with the X-series LPU used)

ET1SWL16AP00

Table 3-4 Resource license control items supported by the S12700E

Part Number

License Control Item

External Model

Minimum Version

Before License Activation

After License Activation

82402092

WLAN Access Controller AP Resource License-1024AP (with the X-series LPU used)

L-1024AP-S127E

V200R019C00

By default, a device supports a maximum of 16 APs.

The number of resources depends on licenses. For the maximum number of access APs, contact Huawei local office.

82402088

WLAN Access Controller AP Resource License-512AP (with the X-series LPU used)

L-512AP-S127E

82402089

WLAN Access Controller AP Resource License-64AP (with the X-series LPU used)

L-64AP-S127E

82402090

WLAN Access Controller AP Resource License-32AP (with the X-series LPU used)

L-32AP-S127E

82402091

WLAN Access Controller AP Resource License-1AP (with the X-series LPU used)

L-1AP-S127E

81401374

800Gbps Switching Capacity Resource License (with the LST7SFUMX100 SFU used)

S12700E-12: RTU-800G-S127E

S12700E-4, S12700E-8: Not supported

V200R019C00

For the maximum switching capacity before license activation, contact Huawei local office.

The maximum switching capacity after license activation = The maximum switching capacity before license activation + 800 Gbps

NOTE:

For switches running V200R019C00, the license takes effect only after the switch is restarted. After the license takes effect in a CSS, if a member switch is powered off and restarted, the switch needs to restart for another time so that it can join the CSS again.

For switches running V200R019C10 or a later version, the license takes effect immediately without restarting.

Translation
Favorite
Download
Update Date:2024-04-09
Document ID:EDOC1000069461
Views:75497
Downloads:516
Average rating:0.0Points

Digital Signature File

digtal sigature tool