CX320 Switch Module V100R001 Command Reference 12
ssh server ip-block disable
Function
The ssh server ip-block disable command disables an SSH server from locking client IP addresses.
The undo ssh server ip-block disable command enables an SSH server to lock client IP addresses.
By default, an SSH server is enabled to lock client IP addresses.
Usage Guidelines
If an SSH server is enabled to lock client IP addresses, locked client IP addresses fail to pass authentication and are displayed in the display ssh server ip-block list command output.
If an SSH server is disabled from locking client IP addresses, the display ssh server ip-block list command does not display any client IP address that is locked because of authentication failures.
Example
# Disable an SSH server from locking client IP addresses.
<HUAWEI> system-view
[~HUAWEI] ssh server ip-block disable
Warning: It is not recommended to disable IP block feature. This operation may result in system becoming vulnerable to security threats.
# Enable an SSH server to lock client IP addresses.
<HUAWEI> system-view
[~HUAWEI] undo ssh server ip-block disable
Document ID:EDOC1000128405
Views:5217645
Downloads:1651
Average rating:4.75Points