CX320 Switch Module V100R001 Command Reference 14
advertise l2vpn evpn
Function
The advertise l2vpn evpn command enables a device to advertise IP routes imported to a VPN instance to its EVPN instance.
The undo advertise l2vpn evpn command restores the default configuration.
By default, a device is disabled from advertising IP routes imported to a VPN instance to its EVPN instance.
Usage Guidelines
Usage Scenario
After VTEPs establish VXLAN tunnels through IP prefix routes, run the advertise l2vpn evpn command in the BGP-VPN instance IPv4 address family view or BGP-VPN instance IPv6 address family view to enable a VTEP to advertise host routes imported to a VPN instance to its EVPN instance. The VTEP then sends host routes to the remote VTEP through the BGP EVPN peer relationship.
Document ID：EDOC1000128405
Views：7700961
Downloads：2083
Average rating：4.75Points