Huawei Firewall VPN Interoperation Configuration Guide
This document provides the guide for configuring a Huawei firewall to use VPN to communicate with a non-Huawei device.
This document provides the guide for configuring a Huawei firewall to use VPN to communicate with a non-Huawei device.
Access through SecoClient
- Web: Example for Configuring a Mobile User to Use the SecoClient to Access the Enterprise Network over an L2TP over IPSec VPN Tunnel (Using Pre-shared Key Authentication)
This section describes how to configure a mobile user to use the SecoClient to access the enterprise network over an L2TP over IPSec VPN tunnel. - Web: Example for Configuring Mobile Users to Use the SecoClient to Access Both an Enterprise Network and the Internet Based on the Tunnel Splitting Technology
The tunnel splitting technology is enabled on the gateway deployed at the enterprise headquarters. Mobile users use the SecoClient to access the enterprise network through the L2TP over IPSec VPN tunnel with encrypted traffic and access the Internet with unencrypted traffic. - CLI: Example for Configuring Mobile Users to Use the SecoClient to Access Both an Enterprise Network and the Internet Based on the Tunnel Splitting Technology
The tunnel splitting technology is enabled on the gateway deployed at the enterprise headquarters. Mobile users use the SecoClient to access the enterprise network through the L2TP over IPSec VPN tunnel with encrypted traffic and access the Internet with unencrypted traffic. - Web: Example for Configuring Mobile Office Users Accessing the Enterprise Intranet Using the SecoClient Through the L2TP over IPSec VPN Tunnel (Using USB Key Digital Signature Certificate Authentication)
This section describes how to configure related data so that mobile office users can use the SecoClient to access the enterprise intranet through the L2TP over IPSec VPN tunnel after USB key digital signature certificate authentication. - CLI: Example for Configuring Mobile Office Users Accessing the Enterprise Intranet Using the SecoClient Through the L2TP over IPSec VPN Tunnel (Using USB Key Digital Signature Certificate Authentication)
This section describes how to configure related data so that mobile office users can use the SecoClient to access the enterprise intranet through the L2TP over IPSec VPN tunnel after USB key digital signature certificate authentication.
Document ID：EDOC1000154805
Views：434436
Downloads：8120
Average rating：4.4Points