No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Unicast Routing

S1720, S2700, S5700, and S6720 V200R011C10

This document describes IP Unicast Routing configurations supported by the switch, including the principle and configuration procedures of IP Routing Overview, Static Route, RIP, RIPng, OSPF, OSPFv3, IS-IS(IPv4), IS-IS(IPv6), BGP, Routing Policy ,and PBR, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IP Routing Features Supported in This Version

IP Routing Features Supported in This Version

This chapter describes IP routing features supported by the switches of different series.

The configuration modes supported by different models are as follows:
  • S1720GW (without license), S1720GWR (without license) and S1720X (without license): Web Configuration (For the web configuration, see S1720GW, S1720GWR, S1720X, S1720GW-E, S1720GWR-E, and S1720X-E V200R011C10 Web System Guide.)
  • S1720GW (license loaded), S1720GWR (license loaded), S1720X (license loaded), S1720GW-E (license loaded), S1720GWR-E (license loaded) and S1720X-E (license loaded): Web Configuration (For the web configuration, see S1720GW, S1720GWR, S1720X, S1720GW-E, S1720GWR-E, and S1720X-E V200R011C10 Web System Guide) and CLI. CLI configuration supports the following features.
  • Other models: Web Configuration (For the web configuration, see S1720GFR, S2700, S5700, and S6720 V200R011C10 Web System Guide) and CLI. CLI configuration supports the following features.

Feature

S1720GFR

S1720GW

S1720GWR

S1720X

S1720GW-E

S1720GWR-E

S1720X-E

S2720EI

S2750EI

S5700LI

S5700S-LI

S5710-X-LI

S5720LI

S5720S-LI

S5720SI

S5720S-SI

S5730SI

S5730S-EI

S5720EI

S5720HI

S6720LI

S6720S-LI

S6720SI

S6720S-SI

S6720EI

S6720S-EI

Static route

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

RIP

Supported except S1720GFR

Supported

Supported only when Layer 3 hardware forwarding for IPv4 packets is enabled. To enable this function, run the assign forward-mode ipv4-hardware command.

Supported. S5700-10P-PWR-LI-AC/S5700-10P-LI-AC support RIP only when Layer 3 hardware forwarding for IPv4 packets is enabled. To enable this function, run the assign forward-mode ipv4-hardware command.

Supported

Supported

Supported

Supported

Supported

Supported

RIPng

Supported except S1720GFR

Supported

Not supported

Supported. Only the S5700-10P-PWR-LI-AC/S5700-10P-LI-AC do not support RIPng.

Supported

Supported

Supported

Supported

Supported

Supported

OSPF

Supported except S1720GFR

Supported

Not supported

Not supported

Supported

Supported

Supported

Supported

Supported

Supported

OSPFv3

Supported except S1720GFR

Supported

Not supported

Not supported

Supported

Supported

Supported

Supported

Supported

Supported

IS-IS (IPv4)

Not supported

Not supported

Not supported

Not supported

Not supported

Supported

Supported

Not supported

Supported

Supported

IS-IS (IPv6)

Not supported

Not supported

Not supported

Not supported

Not supported

Supported

Supported

Not supported

Supported

Supported

BGP

Not supported

Not supported

Not supported

Not supported

Not supported

Supported

Supported

Not supported

Supported

Supported

Routing policy

Supported except S1720GFR

Supported

Supported only when Layer 3 hardware forwarding for IPv4 packets is enabled. To enable this function, run the assign forward-mode ipv4-hardware command.

Supported. S5700-10P-PWR-LI-AC/S5700-10P-LI-AC support Routing policy only when Layer 3 hardware forwarding for IPv4 packets is enabled. To enable this function, run the assign forward-mode ipv4-hardware command.

Supported

Supported

Supported

Supported

Supported

Supported

Policy based routing

Supported except S1720GFR

Supported

Not supported

Not supported

Supported

Supported

Supported

Supported

Supported

Supported

NOTE:

Only the S6720EI, S6720S-EI, S5720HI, S5720EI, S6720SI, S6720S-SI, S5730SI, S5730S-EI, S5720SI, and S5720S-SI support BFD.

Only the S6720EI, S6720S-EI, S5720HI, S5720EI, S6720SI, S6720S-SI, S5730SI, S5730S-EI, S5720SI, S5720S-SI, S6720LI, S6720S-LI, S5720LI, S5720S-LI, S2720EI, S1720X-E, S1720GW-E, S1720GWR-E, S1720GW, S1720GWR, S1720X support commands with the vpn-instance parameter.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178171

Views: 332043

Downloads: 1146

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next