SupportDocumentationSwitchesCampus SwitchS1700&S2700Reference GuidesMIB Reference

S1720, S2700, S5700, and S6720 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.

HUAWEI-WLAN-AP-MIB

HUAWEI-WLAN-AP-MIB

Function Overview

HUAWEI-WLAN-AP-MIB is used to manage parameters related to features and functions of APs.

In the fat AP networking topology, APs are managed separately. If multiple APs are deployed, you must manage APs one by one. To enable convenient and centralized management of APs, the fit AP networking topology is used. In fit AP mode, APs in an area are managed by an AC in a centralized manner, improving the management efficiency and reduce the management cost.

Root object:

iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).huawei(2011).huaweiUtility(6).hwWlan(139).hwWlanAp(13)

Relationships Between Tables

Figure 127-1  Relationships Between hwWlanApTable, hwWlanApWiredPortTable, hwWlanApWiredPortStatTable, hwWlanApWiredPortLldpTable, and hwWlanApWiredPortLldpRemManAddrTable

hwWlanApMac of hwWlanApTable is the index of hwWlanApWiredPortTable, hwWlanApWiredPortStatTable, hwWlanApWiredPortLldpTable, and hwWlanApWiredPortLldpRemManAddrTable.

Figure 127-2  Relationships Between hwWlanApWiredPortTable and hwWlanApWiredPortStatTable

hwWlanApWiredPortIndex of hwWlanApWiredPortTable is the index of hwWlanApWiredPortStatTable.

Figure 127-3  Relationships Between hwWlanApWiredPortLldpTable and hwWlanApWiredPortLldpRemManAddrTable

hwWlanApWiredPortLldpRemIndex of hwWlanApWiredPortLldpTable is the index of hwWlanApWiredPortLldpRemManAddrTable.

Description of Single Objects

hwWlanApPingApMac

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.1.1

hwWlanApPingApMac

MacAddress

read-write

This object specifies the MAC address in an AP ping operation. If the AP ID and MAC address are specified concurrently, the AP is pinged based on the MAC address.

This object is implemented as defined in the corresponding MIB file.

hwWlanApPingAddress

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.1.2

hwWlanApPingAddress

OCTET STRING

read-write

This object indicates the domain name or IP address of the destination host.

This object is implemented as defined in the corresponding MIB file.

hwWlanApPingCount

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.1.3

hwWlanApPingCount

Integer32(1–10)

read-write

This object indicates the number of times ICMP ECHO-REQUEST packets are sent.

Default value: 4

This object is implemented as defined in the corresponding MIB file.

hwWlanApPingPacketSize

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.1.4

hwWlanApPingPacketSize

Integer32(20–8100)

read-write

This object indicates the length of an ECHO-REQUEST packet excluding the IP header and ICMP header.

Unit: byte

Default value: 56

This object is implemented as defined in the corresponding MIB file.

hwWlanApPingWaitTime

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.1.5

hwWlanApPingWaitTime

Integer32(1–5000)

read-write

This object indicates the time to wait before sending the next ICMP Request packet.

Unit: ms

Default value: 2000

This object is implemented as defined in the corresponding MIB file.

hwWlanApPingTimeOut

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.1.6

hwWlanApPingTimeOut

Integer32(500–5000)

read-write

This object indicates the timeout period for an ECHO-RESPONSE after an ECHO-REQUEST is sent.

Unit: ms

Default value: 2000

This object is implemented as defined in the corresponding MIB file.

hwWlanApPingResultSuccessCount

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.1.7

hwWlanApPingResultSuccessCount

Integer32

read-only

This object indicates the number of successful AP ping operations. Only the result of the latest AP ping operation is kept.

This object is implemented as defined in the corresponding MIB file.

hwWlanApPingResultFailureCount

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.1.8

hwWlanApPingResultFailureCount

Integer32

read-only

This object indicates the number of AP ping operation failures. Only the result of the latest AP ping operation is kept.

This object is implemented as defined in the corresponding MIB file.

hwWlanApPingResultAveResponseTime

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.1.9

hwWlanApPingResultAveResponseTime

Integer32

read-only

This object indicates the average response time for an AP ping operation. Only the result of the latest AP ping operation is kept.

Unit: ms

This object is implemented as defined in the corresponding MIB file.

hwWlanApPingResultMinResponseTime

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.1.10

hwWlanApPingResultMinResponseTime

Integer32

read-only

This object indicates the minimum response time for an AP ping operation. Only the result of the latest AP ping operation is kept.

Unit: ms

This object is implemented as defined in the corresponding MIB file.

hwWlanApPingResultMaxResponseTime

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.1.11

hwWlanApPingResultMaxResponseTime

Integer32

read-only

This object indicates the maximum response time for an AP ping operation. Only the result of the latest AP ping operation is kept.

Unit: ms

This object is implemented as defined in the corresponding MIB file.

hwWlanApPingResultFlag

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.1.12

hwWlanApPingResultFlag

Integer{false(1),true(2)}

read-only

This object indicates the result of the AP ping operation. If the object is executed during the ping operation, false is returned; if the object is executed after the ping operation is complete, true is returned.

This object is implemented as defined in the corresponding MIB file.

hwApPowerWorkMode

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.1.2.59

hwApPowerWorkMode

OCTET STRING[0..10]

accessible-for-notify

This object indicates the actual power supply mode of an AP.

This object is implemented as defined in the corresponding MIB file.

hwApExpectPowerWorkMode

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.1.2.60

hwApExpectPowerWorkMode

OCTET STRING[0..10]

accessible-for-notify

This object indicates the expected power supply mode of an AP.

This object is implemented as defined in the corresponding MIB file.

Description of MIB Tables

hwWlanApTypeTable

This table is used to query attributes based on AP types and restart APs based on AP types.

The index of this table is hwWlanApType.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.2.1.1.1

hwWlanApType

OCTET STRING

accessible-for-notify

This object indicates the AP type name. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.1.1.2

hwWlanApTypeDesc

OCTET STRING

read-only

This object indicates description of an AP type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.1.1.3

hwWlanApTypeWiredPortNum

Integer32

read-only

This object indicates the number of wired ports on APs of a certain type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.1.1.4

hwWlanApTypeRadioNum

Integer32

read-only

This object indicates the number of radios on APs of a certain type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.1.1.5

hwWlanApTypeMaxStaNum

Integer32

read-only

This object indicates the maximum number of access STAs on an AP of a certain type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.1.1.6

hwWlanApTypeReset

Integer32

read-write

This object indicates that APs are restarted based on the AP type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.1.1.7

hwWlanApTypeExternalAntenna

INTEGER{notSupport(1),support(2)}

read-only
This object indicates whether an AP supports external antennas.
  • 1: The AP does not support external antennas.
  • 2: The AP supports external antennas.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table can be modified without restriction.

Deletion Restriction

The entries in this table cannot be deleted without restriction.

Access Restriction

The entries in this table can be read without restriction.

hwWlanApTypeRadioTable

This table is used to query radio-related attributes of APs of a certain type.

The indexes of this table are hwWlanApType and hwWlanApTypeRadioIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.2.2.1.1

hwWlanApTypeRadioIndex

Integer32

not-accessible

This object indicates the radio index of APs of a certain type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.2.1.2

hwWlanApTypeRadioType

INTEGER{wlan80211a(1),wlan80211b(2),wlan80211g(3),wlan80211bg(4),wlan80211an(5),wlan80211bgn(6),wlan80211abgn(7),wlan80211ac(8),wlan80211anac(9)}

read-only

This object indicates the radio type of APs of a certain type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.2.1.3

hwWlanRadioMaxSpatialStreamsNum

Unsigned32

read-only

This object indicates the maximum number of spatial streams of an AP radio.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.2.1.4

hwWlanApTypeRadioAntennaGain

Integer32

read-only

This object indicates that the antenna gain is configured according to the radio ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.2.1.5

hwWlanApTypeRadioMaxVAPNum

Unsigned32

read-only

This object indicates the maximum number of VAPs that a radio supports.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwWlanApTypeWiredPortTable

This table is used to query wired interface attributes of APs of a certain type.

The indexes of this table are hwWlanApType and hwWlanApTypeWiredPortIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.2.3.1.1

hwWlanApTypeWiredPortIndex

Integer32

not-accessible

This object indicates the index of an AP's wired interface.

Numbering rule: port-index = port-type * 100 + port-number. For example, the indexes of a wall plate AP's GE0, eth0, and eth1 are 200 (2 * 100 + 0 = 200), 100 (1 * 100 + 0 = 100), and 101 (1 * 100 + 1 = 101) respectively.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.3.1.2

hwWlanApTypeWiredPortType

INTEGER{fe(1),ge(2),gpon(3),epon(4),adsl2plus(5),ethTrunk(6),multige(7)}

read-only

This object indicates the type of an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.2.3.1.3

hwWlanApTypeWiredPortName

OCTET STRING

read-only

This object indicates the name of a wired interface on APs of a certain type, for example, ethernet 0, ethernet 1, gigabit-ethernet 0, and eth-trunk 0.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwWlanUnauthedApRecordTable

This table describes rogue AP records. Rogue APs are those whose MAC addresses and SNs are not in the whitelist and not confirmed after being discovered by the AC.

The index of this table is hwWlanUnauthedApRecordIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.2.1.1

hwWlanUnauthedApRecordIndex

Integer32

not-accessible

This object indicates the index of a rogue AP record.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.2.1.2

hwWlanUnauthedApType

OCTET STRING

read-only

This object indicates the type of a rogue AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.2.1.3

hwWlanUnauthedApMacAddress

MacAddress

read-only

This object indicates the MAC address of a rogue AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.2.1.4

hwWlanUnauthedApSn

OCTET STRING

read-only

This object indicates the SN of a rogue AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.2.1.5

hwWlanUnauthedApIpAddress

IpAddress

read-only

This object indicates the IP address of a rogue AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.2.1.6

hwWlanUnauthedApRecordTime

DateAndTime

read-only

This object indicates the time when a rogue AP is recorded.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwWlanApTable

This table is used to add, delete, modify, reset, or confirm APs. You can also use the table to query the configuration and restore factory settings of APs.

The index of this table is hwWlanApMac.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.3.1.1

hwWlanApMac

MacAddress

accessible-for-notify

This object indicates the MAC address of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.2

hwWlanApSn

OCTET STRING

read-only

This object indicates the sequence number (SN) of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.3

hwWlanApTypeInfo

OCTET STRING

read-only

This object indicates the AP type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.4

hwWlanApName

OCTET STRING

read-write

This object indicates the AP name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.5

hwWlanApGroup

OCTET STRING

read-write

This object indicates the group to which an AP belongs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.6

hwWlanApRunState

INTEGER{idle(1),autofind(2),typeNotMatch(3),fault(4),config(5),configFailed(6),download(7),normal(8),committing(9),commitFailed(10),standby(11),verMismatch(12),nameConflicted(13),invalid(14),countryCodeMismatch(15)}

read-only

This object indicates the AP state.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.7

hwWlanApSoftwareVersion

OCTET STRING

read-only

This object indicates the AP software version.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.8

hwWlanApHardwareVersion

OCTET STRING

read-only

This object indicates the AP hardware version.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.9

hwWlanApCpuType

OCTET STRING

read-only

This object indicates the CPU type of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.10

hwWlanApCpufrequency

Integer32

read-only

This object indicates the CPU frequency of an AP.

Unit: MHz

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.11

hwWlanApMemoryType

OCTET STRING

read-only

This object indicates the memory type of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.12

hwWlanApDomain

OCTET STRING

read-only

This object indicates the AP domain.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.13

hwWlanApIpAddress

IpAddress

read-only

This object indicates the IP address of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.14

hwWlanApIpNetMask

IpAddress

read-only

This object indicates the IP address mask of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.15

hwWlanApGatewayIp

IpAddress

read-only

This object indicates the gateway IP address of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.16

hwWlanApMemorySize

Integer32

read-only

This object indicates the memory size of an AP.

Unit: MB

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.17

hwWlanApFlashSize

Integer32

read-only

This object indicates the flash memory size of an AP.

Unit: MB

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.18

hwWlanApRunTime

Unsigned32

read-only

This object indicates the running time of an AP.

Unit: tick

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.19

hwWlanApAdminOper

INTEGER{reset(1),confirm(2),manufacturerConfig(3)}

read-create

This object indicates administrative status of an AP.

Only the write operation is supported.

1.3.6.1.4.1.2011.6.139.13.3.3.1.20

hwWlanApDNS

IpAddress

read-only

This object indicates the AP DNS.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.21

hwWlanApOnlineTime

Unsigned32

read-only

This object indicates online duration of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.22

hwWlanApSysSoftwareDesc

OCTET STRING

read-only

This object indicates system software description of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.23

hwWlanApSysHardtwareDesc

OCTET STRING

read-only

This object indicates system hardware description of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.24

hwWlanApSysManufacture

OCTET STRING

read-only

This object indicates the manufacturer of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.25

hwWlanApSysSoftwareName

OCTET STRING

read-only

This object indicates software name of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.26

hwWlanApSysSoftwareVendor

OCTET STRING

read-only

This object indicates the manufacturer of the AP software.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.27

hwWlanApBomCode

OCTET STRING

read-only

This object indicates the BOM code.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.33

hwWlanApBootCountTotal

Integer32

read-only

This object indicates the total number of times an AP is restarted.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.34

hwWlanApBootCountPowerOff

Integer32

read-only

This object indicates the number of times an AP is restarted due to a power failure.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.35

hwWlanApBootCountClear

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object clears the AP restart count.

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

Only the write operation is supported.

1.3.6.1.4.1.2011.6.139.13.3.3.1.36

hwWlanApElectronicLabel

OCTET STRING(0–1025)

read-only

This object indicates the electronic label of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.37

hwWlanApWiredPortNum

Integer32

read-only

This object indicates the total number of wired interfaces.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.38

hwWlanApWiredPortMtu

Integer32

read-only

This object indicates the maximum transmit unit (MTU) of a wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.39

hwWlanApWiredPortMac

MacAddress

read-only

This object indicates the MAC address of a wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.40

hwWlanApMemoryUseRate

Integer32

read-only

This object indicates the memory usage.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.41

hwWlanApCpuUseRate

Integer32

read-only

This object indicates the CPU usage.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.43

hwWlanApTemperature

Integer32

read-only

This object indicates the operating temperature.

Unit: °C

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.44

hwWlanApOnlineUserNum

Integer32

read-only

This object indicates the number of online users.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.45

hwWlanApDualBandAssoc5gStaNum

Unsigned32

read-only

This object indicates the number of dual-band terminals that access the 5 GHz radio.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.46

hwWlanApDualBandStaNum

Unsigned32

read-only

This object indicates the number of STAs that support dual frequency bands.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.47

hwWlanApStaOnlineFailRatio

Unsigned32

read-only

This object indicates STA online failure ratio on an AP.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.48

hwWlanApStaOfflineRatio

Unsigned32

read-only

This object indicates STA offline ratio of an AP.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.49

hwWlanApStickyClientRatio

Unsigned32

read-only

This object indicates the proportion of sticky STAs to all STAs.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.50

hwWlanApUpEthPortSpeed

INTEGER{speed10(1),speed100(2),speed1000(3),speed10000(4)}

read-only

This object indicates the rate of an upstream Ethernet interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.51

hwWlanApUpEthPortSpeedMode

INTEGER{auto(1),forced(2)}

read-only

This object indicates the rate mode of an upstream Ethernet interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.52

hwWlanApUpEthPortDuplex

INTEGER{half(1),full(2)}

read-only

This object indicates the duplex state of an upstream Ethernet interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.53

hwWlanApUpEthPortDuplexMode

INTEGER{auto(1),forced(2)}

read-only

This object indicates the duplex mode of an upstream Ethernet interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.54

hwWlanApUpPortSpeed

Integer32

read-only

This object indicates the real-time rate of an upstream interface.

Unit: Mbps

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.55

hwWlanAPUpPortPER

Integer32

read-only

This object indicates the packet error rate of an upstream interface.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.56

hwWlanEthportUpRate

Integer32

read-only

This object indicates the upstream rate of an Ethernet interface.

Unit: Kbps

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.57

hwWlanEthportDownRate

Integer32

read-only

This object indicates the downstream rate of an Ethernet interface.

Unit: Kbps

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.58

hwWlanApAirportUpTraffic

OCTET STRING

read-only

This object indicates the traffic volume on an upstream wireless interface.

Unit: Bytes

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.59

hwWlanApAirportDwTraffic

OCTET STRING

read-only

This object indicates the traffic volume on a downstream wireless interface.

Unit: Bytes

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.60

hwWlanApEthportDwTraffic

OCTET STRING

read-only

This object indicates the traffic volume on a downstream wired interface.

Unit: Bytes

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.61

hwWlanApEthportUpTraffic

OCTET STRING

read-only

This object indicates the traffic volume on an upstream wired interface.

Unit: Bytes

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.62

hwWlanApUpPortRecvPackets

Counter64

read-only

This object indicates the total number of frames received on an upstream interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.63

hwWlanApUpPortSendPackets

Counter64

read-only

This object indicates the total number of frames sent on an upstream interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.64

hwWlanApRowstatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.65

hwWlanApUpPortRecvBytes

Counter64

read-only

This object indicates the total number of bytes received on an upstream interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.66

hwWlanApUpPortSendBytes

Counter64

read-only

This object indicates the total number of bytes sent on an upstream interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.67

hwWlanApId

Unsigned32

read-only

This object indicates the AP ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.68

hwWlanCentralApId

INTEGER

read-only

This object indicates the central AP's ID.

Only the AD9431DN-24X, AD9430DN-24 and AD9430DN-12 support this object.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.69

hwWlanCentralApMac

MacAddress

read-only

This object indicates the central AP's MAC address.

Only the AD9431DN-24X, AD9430DN-24 and AD9430DN-12 support this object.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.70

hwWlanCentralApName

OCTET STRING

read-only

This object indicates the central AP's name.

Only the AD9431DN-24X, AD9430DN-24 and AD9430DN-12 support this object.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.71

hwWlanApSDCardSize

Integer32

read-only

This object indicates the SD card size of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.72

hwWlanAPLongitude

OCTET STRING

read-only

This object indicates the longitude of the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.73

hwWlanAPLatitude

OCTET STRING

read-only

This object indicates the latitude of the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.74

hwWlanApTotalOnlineTime

Unsigned32

read-only

This object indicates the total online duration of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.75

hwWlanApDiscoverTime

Unsigned32

read-only

This object indicates the total duration since an AP went online for the first time.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.76

hwWlanAPPoeWorkmode

INTEGER{af(1),at(2),bt(3),invalid(4)}

read-only

This object indicates the PoE working mode of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.3.1.77

hwWlanAPPoeExpectedWorkmode

INTEGER{af(1),at(2),bt(3),invalid(4)}

read-only

This object indicates the expected PoE working mode of an AP.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

When you import APs offline, you need to configure hwWlanApRowstatus. You need to select either hwWlanApName or hwWlanApGroup or both of them. hwWlanApSn is optional.

Modification Restriction

The entries in this table can be modified without restriction.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

The entries in this table can be read only when the corresponding AP exists.

hwWlanApWiredPortTable

This table describes AP wired interfaces and is used to query attributes of the wired interfaces.

The index of this table is hwWlanApMac and hwWlanApWiredPortIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.4.1.1

hwWlanApWiredPortIndex

Integer32

not-accessible

This object indicates the index of an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.4.1.2

hwWlanApWiredPortType

INTEGER{fe(1),ge(2),gpon(3),epon(4),adsl2plus(5),trunk(6),multige(7)}

read-only

This object indicates the type of an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.4.1.3

hwWlanApWiredPortDesc

OCTET STRING

read-only

This object indicates description of an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.4.1.4

hwWlanApWiredPortState

INTEGER{down(1),up(2),unknown(-1)}

read-only

This object indicates status of an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.4.1.5

hwWlanApWiredPortSpeed

Integer32

read-only

This object indicates the rate of an AP's wired interface.

Unit: Mbps

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.4.1.6

hwWlanApMultiWiredPortDuplex

INTEGER{half(1),full(2),unknown(-1)}

read-only

This object indicates the duplex state of an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.4.1.7

hwWlanApMultiWiredPortNegotiation

INTEGER{auto(1),forced(2),unknown(-1)}

read-only

This object indicates the auto-negotiation mode of an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.4.1.8

hwWlanApMultiWiredPortMode

INTEGER{root(1),endpoint(2),middle(3)}

read-only

This object indicates the working mode of an AP's wired interface.

Default value: is invalid.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.4.1.9

hwWlanApWiredPortApId

Unsigned32

read-only

This object indicates the AP ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.4.1.10

hwWlanApWiredPortApName

OCTET STRING

read-only

This object indicates the AP name.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwWlanApWiredPortStatTable

This table is used to query or clear statistics on AP wired interfaces.

The indexes of this table are hwWlanApMac and hwWlanApWiredPortIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.5.1.1

hwWlanApWiredPortStatClear

Integer32

read-write

This object clears interface statistics.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.5.1.2

hwWlanApWiredPortUpDwnTimes

Unsigned32

read-only

This object indicates the number of times an AP's wired interface alternates between Up and Down.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.5.1.3

hwWlanApWiredPortInPkts

Counter64

read-only

This object indicates the total number of frames received on an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.5.1.4

hwWlanApWiredPortInUnicastPkts

Counter64

read-only

This object indicates the number of unicast frames received on an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.5.1.5

hwWlanApWiredPortInNonUnicastPkts

Counter64

read-only

This object indicates the number of non-unicast frames received on an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.5.1.6

hwWlanApWiredPortInBytes

Counter64

read-only

This object indicates the number of bytes received on an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.5.1.7

hwWlanApWiredPortInErrorPkts

Counter64

read-only

This object indicates the number of error frames received on an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.5.1.8

hwWlanApWiredPortInDiscardPkts

Counter64

read-only

This object indicates the number of dropped frames received on an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.5.1.9

hwWlanApWiredPortOutPkts

Counter64

read-only

This object indicates the total number of frames sent on an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.5.1.10

hwWlanApWiredPortOutUnicastPkts

Counter64

read-only

This object indicates the number of unicast frames sent on an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.5.1.11

hwWlanApWiredPortOutNonUnicastPkts

Counter64

read-only

This object indicates the number of non-unicast frames sent on an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.5.1.12

hwWlanApWiredPortOutBytes

Counter64

read-only

This object indicates the number of bytes sent on an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.5.1.13

hwWlanApWiredPortOutErrorsPkts

Counter64

read-only

This object indicates the number of error packets sent on an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.5.1.14

hwWlanApWiredPortOutDiscardPkts

Counter64

read-only

This object indicates the number of dropped packets sent on an AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwWlanApWiredPortLldpTable

This table is used to query LLDP neighbor information of a specified AP. No entry can be created, modified, or deleted in this table.

The indexes of this table are hwWlanApWiredPortLldpRemLocalPortNum, hwWlanApWiredPortLldpRemIndex, and hwWlanApMac.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.6.1.1

hwWlanApWiredPortLldpRemLocalPortNum

Integer32

not-accessible

This object indicates the local port number of the remote neighbor of the AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.6.1.2

hwWlanApWiredPortLldpRemIndex

Integer32

not-accessible

This object indicates the index of the remote neighbor interface of the AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.6.1.3

hwWlanApWiredPortLldpRemChassisIdSubtype

Integer32

read-only

This object indicates the subtype of the remote neighbor of the AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.6.1.4

hwWlanApWiredPortLldpRemChassisId

OCTET STRING

read-only

This object indicates the subtype ID of the remote neighbor of the AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.6.1.5

hwWlanApWiredPortLldpRemPortIdSubtype

Integer32

read-only

This object indicates the subtype of the remote neighbor interface of the AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.6.1.6

hwWlanApWiredPortLldpRemPortId

OCTET STRING

read-only

This object indicates the ID of the remote neighbor interface of the AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.6.1.7

hwWlanApWiredPortLldpRemPortDesc

OCTET STRING

read-only

This object indicates descriptions about the remote neighbor interface of the AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.6.1.8

hwWlanApWiredPortLldpRemSysName

OCTET STRING

read-only

This object indicates the system name of the remote neighbor of the AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.6.1.9

hwWlanApWiredPortLldpRemSysDesc

OCTET STRING

read-only

This object indicates system descriptions about the remote neighbor of the AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.6.1.10

hwWlanApWiredPortLldpRemSysCapSupported

Integer32

read-only

This object indicates whether the remote neighbor of the AP's wired interface supports the system capability.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.6.1.11

hwWlanApWiredPortLldpRemSysCapEnabled

Integer32

read-only

This object enables the system capability of the remote neighbor of the AP's wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.6.1.12

 hwWlanApWiredPortLldpRemLocalApId

Unsigned32

read-only

This object indicates the AP ID.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwWlanApWiredPortLldpRemManAddrTable

This table is used to query management addresses of LLDP neighbors of a specified AP. No entry can be created, modified, or deleted in this table.

The indexes of this table are hwWlanApWiredPortLldpRemManAddrSubtype, hwWlanApMac, hwWlanApWiredPortLldpRemLocalPortNum, hwWlanApWiredPortLldpRemIndex, and hwWlanApWiredPortLldpRemManAddr.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.7.1.1

hwWlanApWiredPortLldpRemManAddrSubtype

Integer32

not-accessible

This object indicates the remote management address subtype of the wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.7.1.2

hwWlanApWiredPortLldpRemManAddr

OCTET STRING

not-accessible

This object indicates the remote management address of the wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.7.1.3

hwWlanApWiredPortLldpRemManAddrIfSubtype

Integer32

read-only

This object indicates the interface subtype of the remote management address of the wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.7.1.4

hwWlanApWiredPortLldpRemManAddrIfId

Integer32

read-only

This object indicates the interface ID of the remote management address of the wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.7.1.5

hwWlanApWiredPortLldpRemManAddrOID

OCTET STRING

read-only

This object indicates the remote management address OID of the wired interface.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwWlanApOnlineFailTable

This table is used to query or clear AP online failure records, including failure time and reason.

The index of this table is hwWlanApOnlineFailMac.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.8.1.1

hwWlanApOnlineFailMac

MacAddress

not-accessible

This object indicates the MAC address of an AP that fails to go online.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.8.1.2

hwWlanApOnlineFailTime

OCTET STRING

read-only

This object indicates the last time when an AP failed to go online.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.8.1.3

hwWlanApOnlineFailReason

OCTET STRING

read-only

This object indicates the reason why an AP failed to go online last time.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.8.1.4

hwWlanApOnlineFailRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.8.1.5

hwWlanApOnlineFailInfo

OCTET STRING

read-only

This object indicates information about the last three online failures of an AP, including the failure time and reasons.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table can be modified without restriction.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

The entries in this table can be read without restriction.

hwWlanApOfflineTable

This table is used to query or clear AP offline records, including offline time and reason.

The index of this table is hwWlanApOfflineMac.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.9.1.1

hwWlanApOfflineMac

MacAddress

not-accessible

This object indicates the MAC address of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.9.1.2

hwWlanApOfflineTime

OCTET STRING

read-only

This object indicates the AP offline time.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.9.1.3

hwWlanApOfflineReason

OCTET STRING

read-only

This object indicates the AP offline reason.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.9.1.4

hwWlanApOfflineRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.9.1.5

hwWlanApOfflineInfo

OCTET STRING

read-only

This object indicates information about the last three offline records of an AP, including the offline time and reasons.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

You can create entries in this table without restriction.

Modification Restriction

The entries in this table can be modified without restriction.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

The entries in this table can be read without restriction.

hwWlanIDIndexedApTable

This table is used to add, delete, modify, reset, or confirm APs. You can also use the table to query the configuration and restore factory settings of APs.

The index of this table is hwWlanIDIndexedApId.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.10.1.1

hwWlanIDIndexedApId

Unsigned32

not-accessible

AP ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.2

hwWlanIDIndexedApMac

MacAddress

accessible-for-notify

This object indicates the MAC address of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.3

hwWlanIDIndexedApSn

OCTET STRING

read-only

This object indicates the sequence number (SN) of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.4

hwWlanIDIndexedApTypeInfo

OCTET STRING

read-only

This object indicates the AP type.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.5

hwWlanIDIndexedApName

OCTET STRING

read-write

This object indicates the AP name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.6

hwWlanIDIndexedApGroup

OCTET STRING

read-write

This object indicates the group to which an AP belongs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.7

hwWlanIDIndexedApRunState

INTEGER{idle(1),autofind(2),typeNotMatch(3),fault(4),config(5),configFailed(6),download(7),normal(8),committing(9),commitFailed(10),standby(11),verMismatch(12),nameConflicted(13),invalid(14),countryCodeMismatch(15)}

read-only

This object indicates the AP state.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.8

hwWlanIDIndexedApSoftwareVersion

OCTET STRING

read-only

This object indicates the AP software version.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.9

hwWlanIDIndexedApHardwareVersion

OCTET STRING

read-only

This object indicates the AP hardware version.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.10

hwWlanIDIndexedApCpuType

OCTET STRING

read-only

This object indicates the CPU type of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.11

hwWlanIDIndexedApCpufrequency

Integer32

read-only

This object indicates the CPU frequency of an AP.

Unit: MHz

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.12

hwWlanIDIndexedApMemoryType

OCTET STRING

read-only

This object indicates the memory type of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.13

hwWlanIDIndexedApDomain

OCTET STRING

read-only

This object indicates the AP domain.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.14

hwWlanIDIndexedApIpAddress

IpAddress

read-only

This object indicates the IP address of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.15

hwWlanIDIndexedApIpNetMask

IpAddress

read-only

This object indicates the IP address mask of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.16

hwWlanIDIndexedApGatewayIp

IpAddress

read-only

This object indicates the gateway IP address of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.17

hwWlanIDIndexedApMemorySize

Integer32

read-only

This object indicates the memory size of an AP.

Unit: MB

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.18

hwWlanIDIndexedApFlashSize

Integer32

read-only

This object indicates the flash memory size of an AP.

Unit: MB

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.19

hwWlanIDIndexedApRunTime

Unsigned32

read-only

This object indicates the running time of an AP.

Unit: tick

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.20

hwWlanIDIndexedApAdminOper

INTEGER{reset(1),confirm(2),manufacturerConfig(3)}

read-create

This object indicates administrative status of an AP.

Only the write operation is supported.

1.3.6.1.4.1.2011.6.139.13.3.10.1.21

hwWlanIDIndexedApDNS

IpAddress

read-only

This object indicates the AP DNS.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.22

hwWlanIDIndexedApOnlineTime

Unsigned32

read-only

This object indicates online duration of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.23

hwWlanIDIndexedApSysSoftwareDesc

OCTET STRING

read-only

This object indicates system software description of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.24

hwWlanIDIndexedApSysHardtwareDesc

OCTET STRING

read-only

This object indicates system hardware description of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.25

hwWlanIDIndexedApSysManufacture

OCTET STRING

read-only

This object indicates the manufacturer of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.26

hwWlanIDIndexedApSysSoftwareName

OCTET STRING

read-only

This object indicates software name of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.27

hwWlanIDIndexedApSysSoftwareVendor

OCTET STRING

read-only

This object indicates the manufacturer of the AP software.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.28

hwWlanIDIndexedApBomCode

OCTET STRING

read-only

This object indicates the BOM code.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.34

hwWlanIDIndexedApBootCountTotal

Integer32

read-only

This object indicates the total number of times an AP is restarted.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.35

hwWlanIDIndexedApBootCountPowerOff

Integer32

read-only

This object indicates the number of times an AP is restarted due to a power failure.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.36

hwWlanIDIndexedApBootCountClear

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object clears the AP restart count.

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

Only the write operation is supported.

1.3.6.1.4.1.2011.6.139.13.3.10.1.37

hwWlanIDIndexedApElectronicLabel

OCTET STRING(0–1025)

read-only

This object indicates the electronic label of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.38

hwWlanIDIndexedApWiredPortNum

Integer32

read-only

This object indicates the total number of wired interfaces.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.39

hwWlanIDIndexedApWiredPortMtu

Integer32

read-only

This object indicates the maximum transmit unit (MTU) of a wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.40

hwWlanIDIndexedApWiredPortMac

MacAddress

read-only

This object indicates the MAC address of a wired interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.41

hwWlanIDIndexedApMemoryUseRate

Integer32

read-only

This object indicates the memory usage.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.42

hwWlanIDIndexedApCpuUseRate

Integer32

read-only

This object indicates the CPU usage.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.44

hwWlanIDIndexedApTemperature

Integer32

read-only

This object indicates the operating temperature.

Unit: °C

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.45

hwWlanIDIndexedApOnlineUserNum

Integer32

read-only

This object indicates the number of online users.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.46

hwWlanIDIndexedApDualBandAssoc5gStaNum

Unsigned32

read-only

This object indicates the number of dual-band terminals that access the 5 GHz radio.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.47

hwWlanIDIndexedApDualBandStaNum

Unsigned32

read-only

This object indicates the number of STAs that support dual frequency bands.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.48

hwWlanIDIndexedApStaOnlineFailRatio

Unsigned32

read-only

This object indicates STA online failure ratio on an AP.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.49

hwWlanIDIndexedApStaOfflineRatio

Unsigned32

read-only

This object indicates STA offline ratio of an AP.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.50

hwWlanIDIndexedApStickyClientRatio

Unsigned32

read-only

This object indicates the proportion of sticky STAs to all STAs.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.51

hwWlanIDIndexedApUpEthPortSpeed

INTEGER{speed10(1),speed100(2),speed1000(3),speed10000(4)}

read-only

This object indicates the rate of an upstream Ethernet interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.52

hwWlanIDIndexedApUpEthPortSpeedMode

INTEGER{auto(1),forced(2)}

read-only

This object indicates the rate mode of an upstream Ethernet interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.53

hwWlanIDIndexedApUpEthPortDuplex

INTEGER{half(1),full(2)}

read-only

This object indicates the duplex state of an upstream Ethernet interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.54

hwWlanIDIndexedApUpEthPortDuplexMode

INTEGER{auto(1),forced(2)}

read-only

This object indicates the duplex mode of an upstream Ethernet interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.55

hwWlanIDIndexedApUpPortSpeed

Integer32

read-only

This object indicates the real-time rate of an upstream interface.

Unit: Mbps

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.56

hwWlanIDIndexedAPUpPortPER

Integer32

read-only

This object indicates the packet error rate of an upstream interface.

Unit: %

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.57

hwWlanIDIndexedEthportUpRate

Integer32

read-only

This object indicates the upstream rate of an Ethernet interface.

Unit: Kbps

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.58

hwWlanIDIndexedEthportDownRate

Integer32

read-only

This object indicates the downstream rate of an Ethernet interface.

Unit: Kbps

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.59

hwWlanIDIndexedApAirportUpTraffic

OCTET STRING

read-only

This object indicates the traffic volume on an upstream wireless interface.

Unit: Bytes

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.60

hwWlanIDIndexedApAirportDwTraffic

OCTET STRING

read-only

This object indicates the traffic volume on a downstream wireless interface.

Unit: Bytes

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.61

hwWlanIDIndexedApEthportDwTraffic

OCTET STRING

read-only

This object indicates the traffic volume on a downstream wired interface.

Unit: Bytes

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.62

hwWlanIDIndexedApEthportUpTraffic

OCTET STRING

read-only

This object indicates the traffic volume on an upstream wired interface.

Unit: Bytes

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.63

hwWlanIDIndexedApUpPortRecvPackets

Counter64

read-only

This object indicates the total number of frames received on an upstream interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.64

hwWlanIDIndexedApUpPortSendPackets

Counter64

read-only

This object indicates the total number of frames sent on an upstream interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.65

hwWlanIDIndexedApUpPortRecvBytes

Counter64

read-only

This object indicates the total number of bytes received on an upstream interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.66

hwWlanIDIndexedApUpPortSendBytes

Counter64

read-only

This object indicates the total number of bytes sent on an upstream interface.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.70

hwWlanIDIndexedApRowstatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.71

hwWlanIDIndexedApSDCardSize

Integer32

read-only

This object indicates the SD card size of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.72

hwWlanIDIndexedAPLongitude

OCTET STRING

read-only

This object indicates the longitude of the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.73

hwWlanIDIndexedAPLatitude

OCTET STRING

read-only

This object indicates the latitude of the AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.74

hwWlanIDIndexedAPUUIDString

OCTET STRING(0–16)

read-write

This object indicates the UUID field in a string of characters in BLE broadcast frames.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.75

hwWlanIDIndexedAPUUIDHex

OCTET STRING(0–32)

read-write

This object indicates the UUID field in hexadecimal notation in BLE broadcast frames.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.76

hwWlanIDIndexedApChannelLoadMode

INTEGER{indoor(1),outdoor(2),outToindoor(3)}

read-only
This object indicates the channel mode of the AP. The value can be:
  • 1: indoor mode (original channel mode of an indoor AP)
  • 2: outdoor mode (original channel mode of an outdoor AP)
  • 3: indoor mode configured for an outdoor AP
The default value for an indoor AP is 1 and that for an outdoor AP is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.77

hwWlanIDIndexedAPPoeWorkmode

INTEGER{af(1),at(2),bt(3),invalid(4)}

read-only

This object indicates the PoE working mode of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.78

hwWlanIDIndexedAPPoeExpectedWorkmode

INTEGER{af(1),at(2),bt(3),invalid(4)}

read-only

This object indicates the expected PoE working mode of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.79

hwWlanIDIndexedApTotalOnlineTime

Unsigned32

read-only

This object indicates the total online duration of an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.10.1.80

hwWlanIDIndexedApDiscoverTime

Unsigned32

read-only

This object indicates the total duration since an AP went online for the first time.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

When you import APs offline, you need to configure hwWlanIDIndexedApRowstatus. You need to select either hwWlanIDIndexedApName or hwWlanIDIndexedApGroup or both of them. hwWlanIDIndexedApSn is optional.

Modification Restriction

The entries in this table can be modified without restriction.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

The entries in this table can be read without restriction.

hwWlanApOnlineFailReasonTable

This table is used to query records about AP online failure reasons, including the index, description, and count of the AP online failure reasons.

The index of this table is hwWlanApOnlineFailReasonIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.11.1.1

hwWlanApOnlineFailReasonIndex

Integer32

not-accessible

This object indicates the index of an AP online failure reason.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.11.1.2

hwWlanApOnlineFailReasonDesc

OCTET STRING

read-only

This object indicates the description of an AP online failure reason.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.11.1.3

hwWlanApOnlineFailReasonCount

Integer32

read-only

This object indicates the count of AP online failure reasons.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

The entries in this table can be created without restriction.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

The entries in this table can be read without restriction.

hwWlanApOfflineReasonTable

This table is used to query records about AP offline reasons, including the index, description, and count of the AP offline reasons.

The index of this table is hwWlanApOfflineReasonIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.3.12.1.1

hwWlanApOfflineReasonIndex

Integer32

not-accessible

This object indicates the index of an AP offline reason.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.12.1.2

hwWlanApOfflineReasonDesc

OCTET STRING

read-only

This object indicates the description of an AP offline reason.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.13.3.12.1.3

hwWlanApOfflineReasonCount

Integer32

read-only

This object indicates the count of AP offline reasons.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

The entries in this table can be created without restriction.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

The entries in this table can be read without restriction.

Description of Alarm Objects

hwApFaultTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.1

hwApFaultTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApActualType: AP type, OCTET STRING
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApFaultTimes: number of AP failures, Integer32
  • hwWlanApId: AP ID, Unsigned32

The object indicates an AP communication fault alarm.

current

hwApNormalTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.2

hwApNormalTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApActualType: AP type, OCTET STRING
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32

This object indicates an AP communication fault clear alarm.

current

hwApPingResultTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.3

hwApPingResultTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApActualType: AP type, OCTET STRING
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApPingResultSuccessCount: the number of successful AP ping operations, Integer32
  • hwWlanApPingResultFailureCount: the number of AP ping operation failures, Integer32
  • hwWlanApPingResultAveResponseTime: the average response time for an AP ping operation, Integer32
  • hwWlanApPingResultMinResponseTime: the minimum response time for an AP ping operation, Integer32
  • hwWlanApPingResultMaxResponseTime: the maximum response time for an AP ping operation, Integer32
  • hwWlanApId: AP ID, Unsigned32

This object indicates an AP ping result alarm.

current

hwApConfigCommitTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.4

hwApConfigCommitTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32

This object indicates that the configuration of an AP is successfully committed.

current

hwUnAuthorizedApRecordExistTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.5

hwUnAuthorizedApRecordExistTrap

hwWlanApUnAuthorizedApRecordNumber: number of APs failing authentication, Integer32

This object indicates that unauthorized AP alarms exist.

current

hwUnAuthorizedApRecordClearTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.6

hwUnAuthorizedApRecordClearTrap

hwWlanApUnAuthorizedApRecordNumber: number of APs failing authentication, Integer32

This object indicates that unauthorized AP alarms are cleared.

current

hwApCpuOverloadTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.7

hwApCpuOverloadTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApCpuOccupancyRate: AP CPU usage, Integer32
  • hwWlanApCpuOverloadDescInfo: description about the high AP CPU usage
  • hwWlanApId: AP ID, Unsigned32

This object indicates that the CPU usage of an AP exceeds the upper threshold.

current

hwApCpuOverloadRestoreTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.8

hwApCpuOverloadRestoreTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApCpuOccupancyRate: AP CPU usage, Integer32
  • hwWlanApId: AP ID, Unsigned32

This object indicates that an AP's CPU usage restores to the allowed range.

current

hwApMemoryOverloadTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.9

hwApMemoryOverloadTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApMemoryOccupancyRate: AP memory usage, Integer32
  • hwWlanApId: AP ID, Unsigned32

This object indicates that the memory usage of an AP exceeds the upper threshold.

current

hwApMemoryOverloadRestoreTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.10

hwApMemoryOverloadRestoreTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApMemoryOccupancyRate: AP memory usage, Integer32
  • hwWlanApId: AP ID, Unsigned32

This object indicates that the memory usage of an AP restores to the allowed range.

current

hwApStaFullTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.11

hwApStaFullTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanStaAuthFailCause: cause of the STA authentication failure, Integer32
  • hwWlanApPermitStaNum: number of STAs allowed to associate with an AP, Integer32
  • hwWlanApId: AP ID, Unsigned32

This object indicates that new STAs cannot associate with an AP.

current

hwApStaFullRecoverTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.12

hwApStaFullRecoverTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanStaAuthFailCause: cause of the STA authentication failure, Integer32
  • hwWlanApPermitStaNum: number of STAs allowed to associate with an AP, Integer32
  • hwWlanApId: AP ID, Unsigned32

This object indicates that new STAs can associate with an AP.

current

hwAcDevicesSwitchTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.13

hwAcDevicesSwitchTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApSn: AP SN, OCTET STRING
  • hwWlanAcSystemSwitchType: active/standby switchover type, Integer32
  • hwWlanApId: AP ID, Unsigned32

This object that an active/standby AC switchover occurs.

current

hwDyingGaspTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.14

hwDyingGaspTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32

This object indicates a dying gasp alarm.

current

hwApTemperatureTooLowTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.17

hwApTemperatureTooLowTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApNotifyOrRestoreTemperature: AP temperature, Integer32
  • hwWlanApId: AP ID, Unsigned32

This object indicates that the temperature is too low.

current

hwApTemperatureTooLowRestoreTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.18

hwApTemperatureTooLowRestoreTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApNotifyOrRestoreTemperature: AP temperature, Integer32
  • hwWlanApId: AP ID, Unsigned32

This object indicates that the temperature restores to the normal range.

current

hwApTemperatureTooHighTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.19

hwApTemperatureTooHighTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApNotifyOrRestoreTemperature: AP temperature, Integer32
  • hwWlanApId: AP ID, Unsigned32

This object indicates that the temperature is too high.

current

hwApTemperatureTooHighRestoreTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.20

hwApTemperatureTooHighRestoreTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApNotifyOrRestoreTemperature: AP temperature, Integer32
  • hwWlanApId: AP ID, Unsigned32

This object indicates that the temperature restores to the normal range.

current

hwApOpticalRxPowerTooHighTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.21

hwApOpticalRxPowerTooHighTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApIfIndex: AP interface index, INTEGER
  • hwWlanApOpticalRxPower: receive power of an AP's optical module, Integer32
  • hwApEntityPhysicalName: name of the AP's interface, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32
NOTE:

hwWlanApIfIndex and hwApEntityPhysicalName are only supported by the AD9431DN-24X and AD9430DN-24.

This object indicates that the receive power of an AP's optical module is too high.

current

hwApOpticalRxPowerTooHighRestoreTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.22

hwApOpticalRxPowerTooHighRestoreTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApIfIndex: AP interface index, INTEGER
  • hwWlanApOpticalRxPower: receive power of an AP's optical module, Integer32
  • hwApEntityPhysicalName: name of the AP's interface, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32
NOTE:

hwWlanApIfIndex and hwApEntityPhysicalName are only supported by the AD9431DN-24X and AD9430DN-24.

This object indicates that the receive power of an AP's optical module restores to the normal range.

current

hwApOpticalRxPowerTooLowTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.23

hwApOpticalRxPowerTooLowTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApIfIndex: AP interface index, INTEGER
  • hwWlanApOpticalRxPower: receive power of an AP's optical module, Integer32
  • hwApEntityPhysicalName: name of the AP's interface, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32
NOTE:

hwWlanApIfIndex and hwApEntityPhysicalName are only supported by the AD9431DN-24X and AD9430DN-24.

This object indicates that the receive power of an AP's optical module is too low.

current

hwApOpticalRxPowerTooLowRestoreTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.24

hwApOpticalRxPowerTooLowRestoreTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApIfIndex: AP interface index, INTEGER
  • hwWlanApOpticalRxPower: receive power of an AP's optical module, Integer32
  • hwApEntityPhysicalName: name of the AP's interface, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32
NOTE:

hwWlanApIfIndex and hwApEntityPhysicalName are only supported by the AD9431DN-24X and AD9430DN-24.

This object indicates that the receive power of an AP's optical module restores to the normal range.

current

hwApOpticalTemperatureTooHighTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.25

hwApOpticalTemperatureTooHighTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApIfIndex: AP interface index, INTEGER
  • hwWlanApOpticalTemperature: temperature of an AP's optical module, Integer32
  • hwApEntityPhysicalName: name of the AP's interface, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32
NOTE:

hwWlanApIfIndex and hwApEntityPhysicalName are only supported by the AD9431DN-24X and AD9430DN-24.

This object indicates that the temperature of an AP's optical module is too high.

current

hwApOpticalTemperatureTooHighRestoreTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.26

hwApOpticalTemperatureTooHighRestoreTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApIfIndex: AP interface index, INTEGER
  • hwWlanApOpticalTemperature: temperature of an AP's optical module, Integer32
  • hwApEntityPhysicalName: name of the AP's interface, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32
NOTE:

hwWlanApIfIndex and hwApEntityPhysicalName are only supported by the AD9431DN-24X and AD9430DN-24.

This object indicates that the temperature of an AP's optical module restores to the normal range.

current

hwApOpticalTemperatureTooLowTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.27

hwApOpticalTemperatureTooLowTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApIfIndex: AP interface index, INTEGER
  • hwWlanApOpticalTemperature: temperature of an AP's optical module, Integer32
  • hwApEntityPhysicalName: name of the AP's interface, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32
NOTE:

hwWlanApIfIndex and hwApEntityPhysicalName are only supported by the AD9431DN-24X and AD9430DN-24.

This object indicates that the temperature of an AP's optical module is too low.

current

hwApOpticalTemperatureTooLowRestoreTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.28

hwApOpticalTemperatureTooLowRestoreTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApIfIndex: AP interface index, INTEGER
  • hwWlanApOpticalTemperature: temperature of an AP's optical module, Integer32
  • hwApEntityPhysicalName: name of the AP's interface, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32
NOTE:

hwWlanApIfIndex and hwApEntityPhysicalName are only supported by the AD9431DN-24X and AD9430DN-24.

This object indicates that the temperature of an AP's optical module restores to the normal range.

current

hwApNotSupportCountryCodeTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.29

hwApNotSupportCountryCodeTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApCfgCountryCode: country code, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32

This object indicates that the country code is not supported.

current

hwApColdBootTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.30

hwApColdBootTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApActualType: AP type, OCTET STRING
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanOccurTime: occurrence time, OCTET STRING
  • hwWlanApBootNotifyName: AP restart alarm name, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32

This object indicates a cold restart alarm.

current

hwApColdBootRestoreTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.31

hwApColdBootRestoreTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApActualType: AP type, OCTET STRING
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanOccurTime: occurrence time, OCTET STRING
  • hwWlanApBootNotifyName: AP restart alarm name, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32

This object indicates a cold restart restore alarm.

current

hwApHotBootTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.32

hwApHotBootTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApActualType: AP type, OCTET STRING
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanOccurTime: occurrence time, OCTET STRING
  • hwWlanApBootNotifyName: AP restart alarm name, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32

This object indicates a hot restart alarm.

current

hwApHotBootRestoreTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.33

hwApHotBootRestoreTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApActualType: AP type, OCTET STRING
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanOccurTime: occurrence time, OCTET STRING
  • hwWlanApBootNotifyName: AP restart alarm name, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32

This object indicates a hot restart restore alarm.

current

hwApCRCTooHighTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.34

hwApCRCTooHighTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanCrcErrActual: CRC error value, Unsigned32
  • hwWlanCrcPortType: CRC port type, OCTET STRING
  • hwWlanCrcPortID: CRC port number, Integer32
  • hwWlanApId: AP ID, Unsigned32

This object indicates a CRC error alarm.

current

hwApCRCTooHighRestoreTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.35

hwApCRCTooHighRestoreTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanCrcErrActual: actual CRC error value, Unsigned32
  • hwWlanCrcPortType: CRC port type, OCTET STRING
  • hwWlanCrcPortID: CRC port ID, Integer32
  • hwWlanApId: AP ID, Unsigned32

This object indicates that CRC error alarms are cleared.

current

hwApConflictApNameTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.36

hwApConflictApNameTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanOccurTime: occurrence time, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32

This object indicates an alarm of AP name conflict.

current

hwApLicenseTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.37

hwApLicenseTrap

hwWlanApLicenseInfo: license information of APs, OCTET STRING

This object indicates an AP license resource exhaustion alarm.

current

hwApFmeaIICFaultTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.38

hwApFmeaIICFaultTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32

This object indicates an FMEA IIC fault alarm.

current

hwApFmeaIICFaultRestoreTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.39

hwApFmeaIICFaultRestoreTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32

This object indicates that the FMEA IIC fault alarm is cleared.

current

hwApFmeaPHYFaultTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.40

hwApFmeaPHYFaultTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32

This object indicates an FMEA PHY fault alarm.

current

hwApFmeaPHYFaultRestoreTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.41

hwApFmeaPHYFaultRestoreTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32

This object indicates that the FMEA PHY fault alarm is cleared.

current

hwApFmeaFaultTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.42

hwApFmeaFaultTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApFaultID: AP fault index, INTEGER
  • hwWlanApIfIndex: port of an AP, INTEGER
  • hwWlanApFaultInfo: AP fault description, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32

This object indicates an FMEA fault alarm.

current

hwApFmeaFaultRestoreTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.43

hwApFmeaFaultRestoreTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApFaultID: AP fault index, INTEGER
  • hwWlanApIfIndex: port of an AP, INTEGER
  • hwWlanApFaultInfo: AP fault description, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32

This object indicates that the FMEA fault alarm is cleared.

current

hwApOpticalInsertTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.44

hwApOpticalInsertTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApIfIndex: AP interface index, INTEGER
  • hwApEntityPhysicalName: name of the AP's interface, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32
NOTE:

hwApEntityPhysicalName is only supported by the AD9431DN-24X and AD9430DN-24.

This object indicates an alarm that is generated when an optical module is installed.

current

hwApOpticalRemoveTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.45

hwApOpticalRemoveTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApIfIndex: AP interface index, INTEGER
  • hwApEntityPhysicalName: name of the AP's interface, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32
NOTE:

hwApEntityPhysicalName is only supported by the AD9431DN-24X and AD9430DN-24.

This object indicates an alarm generated due to installation of an optical module is cleared.

current

hwApReceivedInvalidArpNewTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.46

hwApOpticalRemoveTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApNotifyRadioId: Radio ID used to report alarms, Integer32
  • hwWlanApNotifyWlanId: WLAN ID used to report alarms, Integer32
  • hwWlanApArpAttackDropNum: number of packets discarded due to ARP attacks, Integer32
  • hwWlanApId: AP ID, Unsigned32

This object indicates that invalid ARP packets are received.

current

hwApVersionMismatchTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.47

hwApVersionMismatchTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApActualType: AP type, OCTET STRING
  • hwWlanApSoftwareVersion: AP software version, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32

This object indicates that the AP version and the AC version do not match.

current

hwRadioUploadRemoteCaptureFileTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.48

hwRadioUploadRemoteCaptureFileTrap
  • hwWlanApMac: AP MAC address, MacAddress
  • hwWlanApName: AP name, OCTET STRING
  • hwWlanApRadioID: radio ID, Integer32
  • hwRadioUploadRemoteCaptureResult: remote capture result, OCTET STRING
  • hwWlanApId: AP ID, Unsigned32

This object indicates the alarm on the remote capture result upload result.

current

hwApOnLineNumExceedCardSpecTrap

OID

Object Name

Bound Variable

Description

Status

1.3.6.1.4.1.2011.6.139.13.1.1.57

hwApOnLineNumExceedCardSpecTrap
  • hwWlanSlotNum: slot ID, OCTET STRING

The number of APs going online on the card has exceeded the maximum.

current

hwWlanBLELowPowerTrap

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.1.1.76

hwWlanBLELowPowerTrap
  • hwWlanBLEMacAddr: MAC address of a BLE device. The value type is MacAddress.

This object indicates that the battery power of a BLE device is lower than the specified low power alarm threshold.

This object is implemented as defined in the corresponding MIB file.

hwWlanBLELowPowerRestoreTrap

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.1.1.77

hwWlanBLELowPowerRestoreTrap
  • hwWlanBLEMacAddr: MAC address of a BLE device. The value type is MacAddress.

This object indicates that the low power alarm of a BLE device has been cleared.

This object is implemented as defined in the corresponding MIB file.

hwWlanBLEOfflineTrap

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.1.1.78

hwWlanBLEOfflineTrap
  • hwWlanBLEMacAddr: MAC address of a BLE device. The value type is MacAddress.

This object indicates that a BLE device gets offline.

This object is implemented as defined in the corresponding MIB file.

hwWlanBLEOfflineRestoreTrap

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.1.1.79

hwWlanBLEOfflineRestoreTrap
  • hwWlanBLEMacAddr: MAC address of a BLE device. The value type is MacAddress.

This object indicates that an offline alarm of a BLE device has been cleared.

This object is implemented as defined in the corresponding MIB file.

hwWlanBLEFaultyTrap

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.1.1.80

hwWlanBLEFaultyTrap
  • hwWlanApMac: MAC address of an AP. The value type is MacAddress.
  • hwWlanApName: AP name. The value type is OCTET STRING.
  • hwWlanApId: AP ID. The value type is Unsigned32.

This object indicates that an AP's built-in Bluetooth module is faulty.

This object is implemented as defined in the corresponding MIB file.

hwWlanBLEFaultyRestoreTrap

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.1.1.81

hwWlanBLEFaultyRestoreTrap
  • hwWlanApMac: MAC address of an AP. The value type is MacAddress.
  • hwWlanApName: AP name. The value type is OCTET STRING.
  • hwWlanApId: AP ID. The value type is Unsigned32.

This object indicates that the fault on an AP's built-in Bluetooth module fault alarm is cleared.

This object is implemented as defined in the corresponding MIB file.

hwAPIoTCardInsertTrap

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.1.1.82

hwAPIoTCardInsertTrap
  • hwWlanApMac: MAC address of an AP. The value type is MacAddress.
  • hwWlanApName: AP name. The value type is OCTET STRING.
  • hwWlanApIotCardId: Number of the slot on an AP where an IoT card is installed. The value type is Unsigned32.
  • hwWlanApId: AP ID. The value type is Unsigned32.

This object indicates that an IoT card is inserted.

This object is implemented as defined in the corresponding MIB file.

hwAPIoTCardRemoveTrap

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.1.1.83

hwAPIoTCardRemoveTrap
  • hwWlanApMac: MAC address of an AP. The value type is MacAddress.
  • hwWlanApName: AP name. The value type is OCTET STRING.
  • hwWlanApIotCardId: Number of the slot on an AP where an IoT card is installed. The value type is Unsigned32.
  • hwWlanApId: AP ID. The value type is Unsigned32.

This object indicates that an IoT card is removed.

This object is implemented as defined in the corresponding MIB file.

hwAPIoTServerStartFailTrap

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.1.1.84

hwAPIoTServerStartFailTrap
  • hwWlanApMac: MAC address of an AP. The value type is MacAddress.
  • hwWlanApName: AP name. The value type is OCTET STRING.
  • hwWlanApIotCardId: Number of the slot on an AP where an IoT card is installed. The value type is Unsigned32.
  • hwWlanApUdp: UDP port number. The value type is Unsigned32.
  • hwWlanApId: AP ID. The value type is Unsigned32.

This object indicates that the server module on an AP for receiving data from the IoT card fails to start.

This object is implemented as defined in the corresponding MIB file.

hwAPIoTServerStartFailResumeTrap

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.1.1.85

hwAPIoTServerStartFailResumeTrap
  • hwWlanApMac: MAC address of an AP. The value type is MacAddress.
  • hwWlanApName: AP name. The value type is OCTET STRING.
  • hwWlanApIotCardId: Number of the slot on an AP where an IoT card is installed. The value type is Unsigned32.
  • hwWlanApUdp: UDP port number. The value type is Unsigned32.
  • hwWlanApId: AP ID. The value type is Unsigned32.

This object indicates that the server used by the IoT card is successfully recovered.

This object is implemented as defined in the corresponding MIB file.

hwApConfigInconsistWithActualTrap

Only the AP2010DN, AP8130DN, AP4051TN and AP4030TN support this object.

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.1.1.88

hwApConfigInconsistWithActualTrap
  • hwWlanApMac: AP MAC address. The value type is MacAddress.
  • hwWlanApName: AP name. The value type is OCTET STRING.
  • hwWlanApId: AP ID. The value type is Unsigned32.
  • hwWlanApConfig: AP configuration. The value type is Unsigned32.
  • hwWlanApReason: Reason for inconsistency with the actual configuration. The value type is Unsigned32.

The AP configuration is inconsistent with the actual configuration.

This object is implemented as defined in the corresponding MIB file.

hwWlanBLEDetachedTrap

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.1.1.89

hwWlanBLEDetachedTrap

hwWlanBLEMacAddr: MAC address of a Bluetooth device. The value type is MacAddress.

This object indicates an alarm showing that a Bluetooth tag is detached.

This object is implemented as defined in the corresponding MIB file.

hwWlanBLEDetachedRestoreTrap

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.1.1.90

hwWlanBLEDetachedRestoreTrap

hwWlanBLEMacAddr: MAC address of a Bluetooth device. The value type is MacAddress.

This object indicates an alarm showing that a Bluetooth tag is re-attached.

This object is implemented as defined in the corresponding MIB file.

hwApPowerInsufficientTrap

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.1.1.94

hwApPowerInsufficientTrap
  • hwWlanApMac: AP MAC address. The value type is MacAddress.
  • hwWlanApName: AP name. The value type is OCTET STRING.
  • hwApPowerWorkMode: actual power supply mode of the AP. The value type is OCTET STRING.
  • hwApExpectPowerWorkMode: expected power supply mode of the AP. The value type is OCTET STRING.
  • hwWlanApId: AP ID. The value type is Unsigned32.

The AP power supply is insufficient.

This object is implemented as defined in the corresponding MIB file.

hwApPowerInsufficientResumeTrap

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.1.1.95

hwApPowerInsufficientResumeTrap
  • hwWlanApMac: AP MAC address. The value type is MacAddress.
  • hwWlanApName: AP name. The value type is OCTET STRING.
  • hwApPowerWorkMode: actual power supply mode of the AP. The value type is OCTET STRING.
  • hwApExpectPowerWorkMode: expected power supply mode of the AP. The value type is OCTET STRING.
  • hwWlanApId: AP ID. The value type is Unsigned32.

The AP power supply is resumed.

This object is implemented as defined in the corresponding MIB file.

hwWlanCableSnrNormalTrap

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.1.1.91

hwWlanCableSnrNormalTrap
  • hwWlanApMac: AP MAC address. The value type is MacAddress.
  • hwWlanApName: AP name. The value type is OCTET STRING.
  • hwWlanApIfIndex: AP port index. The value type is Integer32.
  • hwApEntityPhysicalName: AP port name. The value type is OCTET STRING.
  • hwWlanApId: AP ID. The value type is Unsigned32.

The quality of an AP's network cable is good.

This object is implemented as defined in the corresponding MIB file.

hwWlanCableSnrAbnormalTrap

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.1.1.92

hwWlanCableSnrAbnormalTrap
  • hwWlanApMac: AP MAC address. The value type is MacAddress.
  • hwWlanApName: AP name. The value type is OCTET STRING.
  • hwWlanApIfIndex: AP port index. The value type is Integer32.
  • hwApEntityPhysicalName: AP port name. The value type is OCTET STRING.
  • hwWlanApId: AP ID. The value type is Unsigned32.

The quality of an AP's network cable is bad.

This object is implemented as defined in the corresponding MIB file.

hwWlanCableSnrDetectNotSupportTrap

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.13.1.1.93

hwWlanCableSnrDetectNotSupportTrap
  • hwWlanApMac: AP MAC address. The value type is MacAddress.
  • hwWlanApName: AP name. The value type is OCTET STRING.
  • hwWlanApIfIndex: AP port index. The value type is Integer32.
  • hwApEntityPhysicalName: AP port name. The value type is OCTET STRING.
  • hwWlanApId: AP ID. The value type is Unsigned32.

The network cable quality cannot be detected.

This object is implemented as defined in the corresponding MIB file.

Unsupported Objects

The device does not support the following objects. Do not use these objects to maintain the device.

Table 127-1  List of unsupported objects

OID

Object

Table

1.3.6.1.4.1.2011.6.139.13.1.1.15

hwApFaultTrapFat

An alarm object.

1.3.6.1.4.1.2011.6.139.13.1.1.16

hwApNormalTrapFat

An alarm object.
1.3.6.1.4.1.2011.6.139.13.3.3.1.28

hwWlanApIpv6Address

hwWlanApTable
1.3.6.1.4.1.2011.6.139.13.3.3.1.29 hwWlanApIpv6NetMask

hwWlanApTable
1.3.6.1.4.1.2011.6.139.13.3.3.1.30

hwWlanApGatewayIpv6

hwWlanApTable
1.3.6.1.4.1.2011.6.139.13.3.3.1.31

hwWlanApIpv6DNS

hwWlanApTable
1.3.6.1.4.1.2011.6.139.13.3.3.1.32

hwWlanApProtectAcIPv6Addr

hwWlanApTable
1.3.6.1.4.1.2011.6.139.13.3.3.1.42 hwWlanApFlashFreeSize

hwWlanApTable
Translation
Favorite
Download
Update Date：2021-10-30
Document ID：EDOC1000178181
Views：1470561
Downloads：3938
Average rating：0.0Points

Related Documents

Digital Signature File

digtal sigature tool