No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fit AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display current-configuration

display current-configuration

Function

The display current-configuration command displays the currently running configuration.

This command does not display parameters that use default settings.

Format

display current-configuration [ configuration [ configuration-type [ configuration-instance ] ] | interface [ interface-name | interface-type [ interface-number ] ] ] [ feature feature-name [ filter filter-expression ] | filter filter-expression ]

display current-configuration [ all | inactive | [ simple ] [ section section ] ]

Parameters

Parameter Description Value
configuration configuration-type Specifies the configuration type. The value is determined by the current system configurations.
configuration-instance Specifies a configuration instance. The value is a string of 1 to 80 case-insensitive characters without spaces.
interface [ interface-name | interface-type [ interface-number ] ] Specifies an interface name or an interface type. -
feature feature-name Specifies a feature name. -
filter filter-expression Displays the configuration information that matches a regular expression. The value is a string of 1 to 255 case-insensitive characters without spaces.
all

Displays all the configuration information.

-
inactive

Displays the offline configuration information.

-
simple Displays the current simple configuration. -
section section Specifies the configurations to be obtained based on types. The value is a string of 1 to 79 case-insensitive characters without spaces.

Views

All views

Default Level

3: Management level

Usage Guidelines

To check whether the configured parameters take effect, run the display current-configuration command. The parameters that do not take effect are not displayed.

The command output is relevant to user configuration. The command does not display the default configuration.

You can use a regular expression to filter the command output.

If the configuration is in the offline state. The offline configuration is marked with * in the display current-configuration all and display current-configuration inactive command output.

Example

# Display all configurations that include vlan.

<Huawei> display current-configuration | include vlan
vlan batch 10 77 88
 port trunk allow-pass vlan 10
Translation
Download
Updated: 2019-07-18

Document ID: EDOC1100064353

Views: 93164

Downloads: 68

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next