Fit AP V200R019C00 Command Reference
This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
display transceiver
Function
The display transceiver command displays information about the optical module on an interface.
The command displays only information about optical interfaces.
Parameters
Parameter |
Description |
Value |
|---|---|---|
interface interface-type interface-number |
Specifies the type and number of an interface.
|
The value varies depending on device models. |
verbose |
Displays detailed information about the optical module on an interface, including the general, manufacture, alarm, and diagnostic information. |
- |
Usage Guidelines
You can run this command to view general, manufacture, and alarm information about the optical module on an interface. If you specify verbose in the command, diagnostic information is also displayed in the command output.
Example
# Check general information, manufacture information, and alarm information about the optical module on a specified interface.
<HUAWEI> display transceiver interface gigabitethernet 0/0/1
GigabitEthernet0/0/1 transceiver information:
-------------------------------------------------------------
Common information:
Transceiver Type :1000_BASE_SX_SFP
Connector Type :LC
Nominal bit rate(MBits/sec) :1200
Wavelength(nm) :850
Transfer Distance(m) :0(9um),300(50um),150(62.5um)
Digital Diagnostic Monitoring :YES
Vendor Name :SumitomoElectric
Ordering Name :
-------------------------------------------------------------
Manufacture information:
Manu. Serial Number :79K056C05802
Manufacturing Date :2007-09-14
Vendor Name :SumitomoElectric
-------------------------------------------------------------
# Check general information, manufacture information, alarm information, and diagnostic information about the optical module on a specified interface.
<HUAWEI> display transceiver interface gigabitethernet 0/0/1 verbose
GigabitEthernet0/0/1 transceiver information:
-------------------------------------------------------------
Common information:
Transceiver Type :OC3_INTER_REACH_SFP
Connector Type :LC
Nominal bit rate(MBits/sec) :1200
Wavelength(nm) :1310
Transfer Distance(m) :15000(9um)
Digital Diagnostic Monitoring :YES
Vendor Name :HUAWEI
Vendor Part Number :34060358
Ordering Name :
-------------------------------------------------------------
Manufacture information:
Manu. Serial Number :EH1048220807
Manufacturing Date :2010-12-06
Vendor Name :HUAWEI
-------------------------------------------------------------
Alarm information:
RX loss of signal
RX power low
-------------------------------------------------------------
Diagnostic information:
Temperature(°C) :26.00
Temp High Threshold(°C) :85.00
Temp Low Threshold(°C) :-40.00
Voltage(V) :3.29
Volt High Threshold(V) :3.64
Volt Low Threshold(V) :2.95
Bias Current(mA) :4.57
Bias High Threshold(mA) :9.00
Bias Low Threshold(mA) :2.00
RX Power(dBM) :-40.00
RX Power High Threshold(dBM) :0.00
RX Power Low Threshold(dBM) :-16.99
TX Power(dBM) :-5.03
TX Power High Threshold(dBM) :-2.22
TX Power Low Threshold(dBM) :-6.99
-------------------------------------------------------------
Item |
Description |
|---|---|
Transceiver Type |
Type of an optical module. |
Connector Type |
Interface type. |
Nominal bit rate |
Bit rate of the optical module, in Mbit/s. |
Wavelength(nm) |
Optical wavelength of the optical module. |
Transfer Distance(m) |
Transmission distance of the optical module. |
Digital Diagnostic Monitoring |
Whether diagnostic information about the optical module is monitored. |
Vendor Name |
Vendor name of the optical module. |
Ordering Name |
Ordering name of the optical module. |
Manu. Serial Number |
Vendor sequence number of the optical module. |
Manufacturing Date |
Manufacturing date of the optical module. |
RX loss of signal |
LOS alarm on the optical module. |
RX power low |
Low receive power on the optical module. |
Temperature(°C) |
Current temperature of the optical module. |
Voltage(V) |
Current voltage of the optical module. |
Bias Current(mA) |
Bias current of the optical module. |
Bias High Threshold(mA) |
Upper threshold for the bias current of the optical module. |
Bias Low Threshold(mA) |
Lower threshold for the bias current of the optical module. |
RX Power |
Receive power of the optical module. |
RX Power High Threshold |
Upper receive power threshold for the optical module. |
RX Power Low Threshold |
Lower receive power threshold for the optical module. |
TX Power |
Transmit power of the optical module. |
TX Power High Threshold |
Upper transmit power threshold for the optical module. |
TX Power Low Threshold |
Lower transmit power threshold for the optical module. |