Redfish Configurations on TaiShan Servers

./Advanced/Memory Config

Memory Frequency

DDRFreqLimit

• Auto
• Freq1600
• Freq1866
• Freq2133
• Freq2400
• Freq2666
• Freq2933
• Freq3200

Auto

-

Custom Refresh Enable

DdrRefreshSupport

• Disabled
• Enabled

Enabled

-

Custom Refresh Rate

DdrRefreshRate

• 32ms
• 64ms
• Auto

32ms

-

Rank Margin Tool

RankMargin

• Disabled
• Enabled

Disabled

-

RMT Pattern Length

RMTPatternLength

Number. The value ranges from 1 to 32767.

256

-

Per Bit Margin

PerBITMargin

• Disabled
• Enabled

Disabled

-

CA Margin

CAMargin

• Disabled
• Enabled

Disabled

-

Die Interleaving

DieInterleaving

• Disabled
• Enabled

Disabled

-

Channel Interleaving

ChannelInterleaving

• Disabled
• Enabled

Enabled

-

Channel Interleaving 3Way

ChannelInterleaving_3Way

• Disabled
• Enabled

Enabled

-

Rank Interleaving

RankInterleaving

• 1-way Interleave
• 2-way Interleave
• 4-way Interleave

4-way Interleave

-

NUMA

NUMAEn

• Disabled
• Enabled

Enabled

-

One NUMA Per Socket

OneNumaEnable

• Disabled
• Enabled

Disabled

-

Skt Interleaving (socket interleaving)

SktInterleaving

• Disabled
• Enabled

Disabled

This parameter is not supported by TaiShan 200 servers (model 2180).

CKE Power Down

CkeProgramming

• Disabled
• Enabled

Disabled

-

CKE Idle Timer

CkeIdleTimer

Number. The value ranges from 1 to 4095.

20

-

Memory Test

HWMemTest

• Disabled
• Enabled

Enabled

-

Warm Boot Fast Support

WarmBootFastSupport

• Disabled
• Enabled

Enabled

-

Cold Boot Fast Support

ColdBootFastSupport

• Disabled
• Enabled

Enabled

-

Memory Init Type

MemoryInitType

• Serial
• Parallel

Parallel

-

Halt On Memory Error

HaltOnMemoryError

• Disable
• Enable

Disable

-

Exmbist Support

ExmbistSupport

• Disable
• Enable

Disable

-

Multi-Bank Error Threshold

MultiBankErrorThreshold

Number. The value ranges from 0 to 65535.

65535

-

./Advanced/IPMI iBMC Configuration/iBMC Configuration

iBMC WDT Support For POST

BMCWDTEnable

• Disabled
• Enabled

Disabled

-

iBMC WDT TimeOut For POST

BMCWDTTimeout

Number. The value ranges from 15 to 25.

15

-

iBMC WDT Action For POST

BMCWDTAction

• NoAction
• HardReset
• PowerDown
• PowerCycle: power off and power on

HardReset

-

iBMC WDT Support For OS

OSWDTEnable

• Disabled
• Enabled

Disabled

-

iBMC WDT TimeOut For OS

OSWDTTimeout

Number. The value ranges from 5 to 8.

5

-

iBMC WDT Action For OS

OSWDTAction

• NoAction
• HardReset
• PowerDown
• PowerCycle: power off and power on

HardReset

-

./Advanced/LOM Configuration

LOM Control

OnboardPXEDisable

TaiShan 200 servers (models 2280 and 5280):

• Enable All: enables all LOM ports.
• Disable CPU1 LOM
• Disable CPU2 LOM
• Disable All: disables all LOM ports.

TaiShan 200 servers (model 2180):

• Enable: enables all LOM ports.
• Disable: disables all LOM ports.

Enable All

-

LOM DID Config

LOMDid

• Disable
• Enable

Disable

This parameter is not supported by TaiShan 200 servers (model 2180).

LOM1 Port Num

PfNumConfig1

• 1
• 2
• 3
• 4

4

-

LOM2 Port Num

PfNumConfig2

• 1
• 2
• 3
• 4

4

-

./Advanced/LOM Configuration/PXE Configuration

PXE Only

PXEOnly

• Disabled
• Enabled

Disabled

-

PXEX Configuration

PXEXSetting

• Disabled
• Enabled

Enabled

• TaiShan 200 servers (models 2280 and 5280): The value of X ranges from 1 to 9.
• TaiShan 200 servers (model 2180): The value of X ranges from 1 to 4.

PXE Boot Capability

PXENetworkProtocol

• UEFIIPv4
• UEFIIPv6
• UEFIIPv4IPv6
• HTTPSIPv4
• HTTPSIPv6
• HTTPSIPv4IPv6

UEFIIPv4

The value options of this parameter vary depending on the server and BIOS version.

IPv6 DUID Type

IPv6DuidType

• DUID-LLT: link address and time
• DUID-LL link address
• DUID-UUID: UUID

DUID-UUID

Only BIOS V172 and later support this parameter.

IPv4 PXE Support

IPv4PXESupport

• Disabled
• Enabled

Enabled

-

IPv6 PXE Support

IPv6PXESupport

• Disabled
• Enabled

Disabled

-

./Advanced/LOM Configuration/Network Configuration/PortX Configuration

PortX ETH Config Switch

EthXConfigSwitch

• Disabled
• Enabled

Disabled

• TaiShan 200 servers (models 2280 and 5280): The value of X ranges from 1 to 9.
• TaiShan 200 servers (model 2180): The value of X ranges from 1 to 4.
• The Eth setting takes effect only when the corresponding network port exists on the server and the Eth option value matches the network port rate.

PortX Adaptive Link

PortXAdaptiveLink

• Disabled
• Enabled

Disabled

Auto Negotiation

PortXAutoNegotitation

• NotSet
• On
• OFF

NotSet

Link Speed and FEC

PortXSpeedAndFEC

• NotSet
• 10GBAS: 10GE, BASE FEC
• 10GNO: 10GE, no FEC
• 10GAUTO: 10GE, auto FEC
• 25GRS: 25GE, RS FEC
• 25GBASE: 25GE, BASE FEC
• 25GNO: 25GE, no FEC
• 25GAUTO: 25GE, auto FEC
• 40GBASE: 40GE, BASE FEC
• 40GNO: 40GE, NO FEC
• 40GAUTO: 40GE, auto FEC
• 50GRS: 50GE, RS FEC
• 50GBASE: 50GE, BASE FEC
• 50GNO: 50GE, no FEC
• 50GAUTO: 50GE, auto FEC
• 100GRS: 100GE, RS FEC
• 100GNO: 100GE, no FEC
• 100GAUTO: 100GE, auto FEC

NotSet

Link Speed

PortXLinkSpeed

• NotSet
• 10G
• 25G
• 40G
• 50G
• 100G

NotSet

./Advanced/LOM Configuration/NIC Configuration/PortX Configuration

PortX Function Number

PortXFuncNumber

• Number. The value ranges from 0 to 256.
• The value is a number. The total number of functions supported by ports on each CPU cannot exceed 248, and the number of functions supported by each port cannot exceed 128.
• The value of Function Number must be smaller than the value of Tqb Number.

0

• TaiShan 200 servers (models 2280 and 5280): The value of X ranges from 1 to 9.
• TaiShan 200 servers (model 2180): The value of X ranges from 1 to 4.

PortX Tqp Number

PortXTqpNumber

• Number. The value ranges from 0 to 1024.
• The value of Tqb Number must be greater than the value of Function Number.

0

PortX Bd Number

PortXBdNumber

• Number. The value ranges from 72 to 32760.
• The value must be a multiple of 8.

1024

PortX BuffSize

PortXBuffSize

• 0.5K
• 1K
• 2K
• 4K

2K

./Advanced/Processor Configuration

Core Labeling

CoreLabeling

• Packed: sequential labeling
• Round Robin: cross labeling

Packed

-

CPU Flex Ratio Override (non-Turbo maximum frequency)

ProcessorFlexibleRatioOverrideEnable

• Disabled
• Enabled

Disabled

-

CPU Core Flex Ratio (maximum frequency)

ProcessorFlexibleRatio

Number. The value ranges from 10 to 26 (For a 3.0 GHz board, the value ranges from 10 to 30).

0

-

./Advanced/PCIe Config/CPU x PCIe Configuration/CPU x PCIe - Port INDEX

PCI-E Port

PCIEPort[INDEX]

• Disabled
• Enabled

Enabled

The value of INDEX ranges from 0 to 78. The actual value varies according to the server hardware.

Link Speed

PCIELinkSpeedPort[INDEX]

• GEN1(2.5GT/s)
• GEN2(5GT/s)
• GEN3(8GT/s)
• GEN4(16GT/s)

GEN4(16GT/s)

PCI-E Port DeEmphasis

PcieLinkDeEmphasisPortX6000[INDEX]

• Level-6.0dB
• Level-3.5dB

Level-6.0dB

Max Payload Size

PCIEMaxPayloadSizePort[INDEX]

• LEVEL-128B
• LEVEL-256B
• LEVEL-512B

LEVEL-256B

./Advanced/PCIe Config

Support DPC

PCIEDPCSupport

• Disabled
• Enabled

Disabled

-

SRIOV

PCIeSRIOVSupport

• Disabled
• Enabled

Enabled

-

PCIe DSM5# Mode (PCIe DSM5 resource reservation mode)

PcieResourceDsm5

• BIOS Reserve
• Kernel Reserve

BIOS Reserve

-

PCIe Port Control Policy

PciePortPolicy

• Auto
• Compatible

Auto

Only BIOS V151, V163, and later support this parameter.

NVMe GEN4 Disk Workaround (NVMe GEN4 disk performance optimization)

NVMeGen4Workaround

• Disable
• Enable

Disable

Only BIOS V172 and later support this parameter.

SR-IOV System Page Size

SrIovSystemPageSize

• 4K
• 64K

4K

-

./Adcanced/PCIe Config/PCIE SlotX PXE Control

PCIe Slot1 PXE Control

PcieSlotPxeControl[0]

• Disable
• Enable

Enable

-

PCIe Slot2 PXE Control

PcieSlotPxeControl[1]

• Disable
• Enable

Enable

-

PCIe Slot3 PXE Control

PcieSlotPxeControl[2]

• Disable
• Enable

Enable

-

PCIe Slot4 PXE Control

PcieSlotPxeControl[3]

• Disable
• Enable

Enable

-

PCIe Slot5 PXE Control

PcieSlotPxeControl[4]

• Disable
• Enable

Enable

-

PCIe Slot6 PXE Control

PcieSlotPxeControl[5]

• Disable
• Enable

Enable

-

PCIe Slot7 PXE Control

PcieSlotPxeControl[6]

• Disable
• Enable

Enable

-

PCIe Slot8 PXE Control

PcieSlotPxeControl[7]

• Disable
• Enable

Enable

-

./Advanced/MISC Config

Support Smmu

EnableSMMU

• Disabled
• Enabled

Disabled

-

Smmu Work Around

SmmuWorkAround

• Disabled
• Enabled

Disabled

-

Support GOP FB for SM750

EnableGOP

• Disabled
• Enabled

Enabled

-

Support SPCR

EnableSpcr

• Disabled
• Enabled

Enabled

-

System Debug Level

SYSDBGLevel

• Disabled
• Debug

Debug

-

Memory Print Level

DDRDebugLevel

• Disabled
• Minimum
• Minmax: medium level
• Maximum

Minimum

-

CPU Prefetching Configuration

CPUPrefetchConfig

• Disabled
• Enabled

Enabled

-

Support Down Core

CpuCoreNumber

• Disabled
• 1
• 2
• 3

Disabled

-

Dmi Vendor Change

DmiVendorChange

• Disabled
• Enabled

Disabled

-

SPE

SpeEn

• Disabled
• Enabled

Disabled

-

Support 40Bit

Support40Bit

• Disabled
• Enabled

Disabled

Only BIOS V163 and later support this parameter.

Support 44Bit

Support44Bit

• Disabled
• Enabled

Disabled

Only BIOS V176 and later support this parameter.

Type2 Version Custom Control

Type2VersionCustom

• Disabled
• Enabled

Disabled

Only BIOS V163 and later support this parameter.

Support L2PMU

ACTLR_EL3 L2PMU

)

EnableL2PMU

• Disabled
• Enabled

Disabled

Only BIOS V170 and later support this parameter.

Type4 Socket Designation Control

Type4SocketName

• Disabled
• Enabled

Disabled

Only BIOS V173 and later support this parameter.

Slit Table Version

SlitTableVersion

• Version1
• Version2
• Version3

Version2

Only BIOS V173 and later support this parameter.

MemoryPreAlloc

MemoryPreAlloc

• Disabled
• Enabled

Disabled

-

Customized Features

CustomizedFeatures

• Disabled
• NFVFeature

Disabled

-

SPD CRC Optimization

SpdDataRepair

• Disabled
• Enabled

Enabled

-

TPM Device ACPI Format

TpmAcpiFormat

• NoHID
• HID

NoHID

-

./Advanced/MISC Config/Mellanox PXE Control

Mellanox CX-5 PXE 1

MlxPort0

• Enable
• Disable

Enable

-

Mellanox CX-5 PXE 2

MlxPort1

• Enable
• Disable

Enable

-

./Advanced/RAS Config

Support RAS

EnRasSupport

• Disabled
• Enabled

Enabled

-

Support FDM

EnFdmSupport

• Disable
• Enable

Enable

-

./Advanced/RAS Config/Memory RAS Config

Poison (damaged)

EnPoison

• Disabled
• Enabled

Enabled

-

Active Scrub

PatrolScrub

• Disabled
• Enabled

Enabled

-

Active Scrub Interval

PatrolScrubDuration

Number. The value ranges from 0 to 24.

24

-

Passive Scrub

DemandScrubMode

• Disabled
• Enabled

Enabled

The default value is Disabled for TaiShan 200 servers (model 2180).

AB check

X8MisCorrEn

• Disabled
• Enabled

Disabled

-

First Error Correction Interval

PowerOnTime

Number. The value ranges from 0 to 1440.

10

-

Same memory check interval

DimmTime

Number. The value ranges from 0 to 1440.

10

-

./Advanced/RAS Config/Memory RAS Config/Correct Error handle

Correct Error Threshold

CorrectErrorThreshold

Number. The value ranges from 0 to 8000.

6000

-

Funnel Period

FunnelPeriod

• Disabled
• Enabled

Enabled

-

Advance Device Correction

AdvanceDeviceCorrection

• Disabled
• SR
• MR

Disabled

-

./Advanced/RAS Config/PCIe RAS Config

ECRC Feature

EcrcFeature

• Disabled
• Enabled

Disabled

-

Hot-Plug

HotPlug

• Disabled
• Enabled

Enabled

-

./Advanced/Performance Config

Power Policy

CustomPowerPolicy

• Performance
• Efficiency

Efficiency

-

DEMT

DemtMode

• Disabled
• Fast Mode
• Smooth Mode

Disabled

-

Cache Mode

CacheMode

• in:partition out:share
• in:share out:share
• in:private out:share
• in:private out:private

in:partition out:share

-

Stream Write Mode

StreamWrite

• Disabled
• Allocate LLC
• Enabled bypassLLC
• Allocate share LLC

Allocate share LLC

-

Stream Write VALUE

StreamWriteValue

• threshold: 12 lines
• threshold: 64 lines
• threshold: 512 lines

threshold: 12 lines

-

HHA SpecConfig Mode

HHASpecConfig

• Disabled
• Enabled

Enabled

-

./Advanced/TPM Config

Clear TPM

TpmClear

• Disabled
• Enabled

Disabled

This option can be set in Redfish only when Redfish Control on the BIOS Setup screen is set to Enable.

TPM2 Operation

OemTpmEnable

• NoAction
• Disabled
• Enabled

NoAction

TPM Availability

TpmAvailability

• Available
• Hidden

Available

./Advanced/Serial Console Configuration

Serial Console Redirection

CREnable

• Disabled
• Enabled

Enabled

-

UART Baud Rate

BaudRate

• 115200
• 57600
• 19200

115200

-

Data Bits

DataBits

• 8
• 7
• 6
• 5

8

-

Parity

Parity

• NO

NO

-

Stop Bits

StopBits

• 1
• 2

1

-

Flow Control

FlowControl

• NO

NO

-

Terminal Type

TerminalType

• ANSI

ANSI

-

./Advanced/Video Configuration

Display Mode

DisplayMode

On Board Graphics

On Board Graphics

-

./Advanced/USB Configuration

USB 3.0 Controller

UsbControllerEnable

• Disabled
• Enabled

Enabled

This parameter is not supported by TaiShan 200 servers (model 2180).

Front USB Port 1

UsbPort1

• Enabled

Enabled

-

Front USB port 2

UsbPort2

• Enabled

Enabled

-

Rear USB Port 1

UsbPort3

• Enabled

Enabled

-

Rear USB Port 2

UsbPort4

• Enabled

Enabled

-

./Advanced/BBU Configuration

NV Size

BbuNvSize

• 16G
• 32G
• 8G
• Disable

16G

• TaiShan 200 servers (model 2180) do not support these three parameters on the BBU Configuration screen.
• Only BIOS V158, V137, and earlier versions support the Force Recovery parameter.

HDD Number

BbuHddNum

• 2
• 1

2

./Boot

No BootOptions Reset

NoBootResetSetting

• Disabled
• Enabled

Disabled

-

PXE Timeout Control

PxeTimeoutRetryControl

• Disabled: Default timeout duration
• TimeoutRetryCount1: One DHCP retry
• TimeoutRetryCount2: Two DHCP retries
• TimeoutRetryCount3: Three DHCP retries
• TimeoutRetryCount4: Four DHCP retries

Disabled

-

Special Boot

SpecialBoot

• Disabled
• M.2First: The M.2 device is preferentially enabled.
• VirtioHDDOnly: Only Virtio HDDs are retained.

Disabled

-

SP Boot

SPBoot

• Disabled
• Enabled

Enabled

-

External Network Card Boot

ExtrNicBoot

• Disabled
• Enabled

Enabled

-

PXE Retry Count

PxeRetry

Number. The value ranges from 1 to 99.

1

-

./Boot/Boot Type Order

Boot Type Order

BootTypeOrder0

• HardDiskDrive
• DVDROMDrive
• PXE
• Others

HardDiskDrive

-

BootTypeOrder1

• HardDiskDrive
• DVDROMDrive
• PXE
• Others

DVDROMDrive

-

BootTypeOrder2

• HardDiskDrive
• DVDROMDrive
• PXE
• Others

PXE

-

BootTypeOrder3

• HardDiskDrive
• DVDROMDrive
• PXE
• Others

Others

-

./Security

SecureBoot

SecureBoot

• Disabled
• Enabled

Disabled

This option can be set in Redfish only when Redfish Control on the BIOS Setup screen is set to Enable.

./ExitMenu

LoadCustomDefaults

LoadCustomDefaults

• NoAction
• Load

NoAction

This parameter is used to extend Redfish out-of-band functions and cannot be modified on the Setup screen.

./AdvancedMenu/TeeMenu

Support TEE

TeeSupport

• Disable
• Enable

Disable

-

TEE Memory Size

TeeMemSize

• 1G
• 4G
• 16G
• 32G
• 64G
• 128G

1G

-

./MemoryConfig

Custom Refresh Rate

RefreshRate

• 32ms
• 64ms
• Auto

Customized memory refresh rate.

./PolicyConfig

CKE Power Down

PdEn

• Disabled
• Enabled

Stops the CKE power signal.

CKE Idle Timer

PdPrd

Number. The value ranges from 1 to 4095.

The unit used by the CKE idle timer is DCLK. The value ranges from 1 to 4095.

DEMT

Demt

• Disable
• Fast Mode
• Smooth Mode

Sets DEMT.

./FunnelConfig

Funnel Period

Funnel

• Disabled
• Enabled

Enables or disables the funnel period.

PS Funnel Mode

PsFunnel

• Disabled
• Enabled

Enables or disables the adding of inspection errors to the funnel.

Unit Time(s)

UnitTime

Number. The value ranges from 1 to 60.

Sets the unit time of the funnel, in seconds.

./MemoryRasConfig

Correct Error Threshold

CETh

Number. The value ranges from 1 to 8000.

Sets the number of correctable errors. The value ranges from 1 to 8000.

./PatrolConfig

Active Scrub

PSEn

• Disabled
• Enabled

Enables or disables inspection.