WLAN AC V200R019C00 Command Reference
This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
ip domain-name
Function
The ip domain-name command sets the default domain name suffix.
The undo ip domain-name command deletes the default domain name suffix.
By default, no default domain name suffix is provided.
Parameters
| Parameter | Description | Value |
|---|---|---|
domain-name |
Specifies the domain name suffix. |
The value is a string of 1 to 255 characters. |
Usage Guidelines
Usage Scenario
Devices with the same system name may exist in different domains. In this case, you can configure a fully qualified domain name (FQDN) for a device to uniquely identify it. The FQDN of a device consists of the default domain name suffix and device name. You can run the ip domain-name command to set the default domain name suffix and the sysname command to set the device name.
Running the ip domain-name command in the system view can set the default domain name suffix for the device itself. When running this command in the AP or AP group view, you can set the default domain name suffix for APs or RUs managed by an AC or central AP.
Precautions
If you run the ip domain-name command multiple times, the latest configuration overrides the previous configurations.