WLAN Product Description
AirEngine 5760-22WD
Product Characteristics
Huawei AirEngine 5760-22WD is a remote unit (RU) in compliance with the Wi-Fi 6 standard. With mounting brackets, the RU can be easily adapted to junction boxes (86/118/120 mm) and wall-mounting scenarios. The RU uses built-in smart antennas to ensure always-on Wi-Fi signals for users, significantly enhancing users' wireless network experience. It is ideal for scenarios with high-density rooms, such as hotel guest rooms, student dormitory rooms, and hospital wards.
- The dual-radio mode is supported with 2x2:2 MIMO on 2.4 GHz and 4x4:4 MIMO on 5 GHz
- Uplink: 1 x 2.5GE electrical port + 1 x 10GE SFP + optical port; downlink: 4 x GE electrical ports + 2 x RJ45 passthrough ports
- Mounting on a junction box or wall, facilitating deployment
- Built-in smart antennas that automatically adjust the coverage direction and signal strength based on the intelligent switchover algorithm to adapt to the application environment change, and provide accurate and stable coverage as STAs move
- USB port for IoT expansion
- Bluetooth serial interface-based O&M through the built-in Bluetooth module by collaborating with CloudCampus APP; collaboration with a location server to accurately locate Bluetooth terminals and tags
- PoE OUT, supplying power to terminals such as IP phones and external IoT modules
The AirEngine 5760-22WD cannot be mounted on the ceiling.
Hardware Information
Overview
Item | Details |
---|---|
Description | AirEngine5760-22WD(11ax indoor,2+4 dual bands, smart antenna,USB,BLE,PSE) |
Part Number | 02353KDQ |
Model | AirEngine 5760-22WD |
First supported version | V200R019C10 |
Appearance
Ports
1 |
DC 48V |
2 |
USB |
3 |
2.5GE/PoE_IN |
4 |
SFP+ |
5 |
PASS-THRU |
6 |
GE0 to GE2 |
7 |
GE3/PoE_OUT |
- |
- |
Port | Connector Type | Description | Available Components |
---|---|---|---|
2.5GE/PoE_IN | RJ45 | Ethernet uplink electrical port that supports 100M/1000M/2.5G auto-sensing, connects to the wired Ethernet, and supports PoE input. | Network cable |
SFP+ | SFP+ | Ethernet uplink optical port that supports 1G/10G auto-sensing, connects to the wired Ethernet, and works with a matching optical module. | Optical module |
GE0 to GE2 | RJ45 | Ethernet downlink electrical port that supports 10/100/1000M auto-sensing and connects to the wired Ethernet. | Network cable |
GE3/PoE_OUT | RJ45 | Ethernet downlink electrical port that supports 10/100/1000M auto-sensing, connects to the wired Ethernet, and supports PoE output. The maximum PoE power supply capability is 13.6 W. The AP can connect to 802.3af-compliant PDs using CAT5e Ethernet cables at a maximum transmission distance of 40 m. |
Network cable |
DC 48V | DC connector | Connects to a 48 V power adapter. | 48 V DC power adapter |
PASS-THRU | RJ45 | A pair of RJ45 passthrough ports for transparent transmission and interconnection with Ethernet cables or telephone lines. | Network cable or telephone line |
USB | USB 2.0 Type A | Connects to an IoT terminal to implement IoT applications. | IoT module |
Indicators and Buttons
The indicator is located inside the panel, which turns on after the AP is powered on.
1 |
Indicator |
2 |
Default |
Silkscreen | Name | Color | Status | Description |
---|---|---|---|---|
- | System indicator | - | Off | The system is not running. |
Green | Steady on |
|
||
Green | Steady on after blinking once | After the hardware reset is cleared and the software starts, the indicator blinks once. Then, the indicator is steady on until the bottom-layer system starts. | ||
Green | Slow blinking (0.5 Hz) | The AP is running properly, the Ethernet connection is normal, and STAs are associated with the AP. This state is supported in V200R022C00 and later versions. |
||
Green | Slow blinking (0.2 Hz) | The AP is running properly, and the Ethernet connection is normal. For V200R022C00 and later versions, this state also indicates that no STA is associated with the AP. |
||
Green | Blinking once every 0.25s (4 Hz) |
|
||
Red | Steady on | The system is faulty. |
Silkscreen | Name | Description |
---|---|---|
Default | Reset button |
|
Technical Specifications
Item | Specification |
---|---|
Installation Type |
|
Dimensions without packaging (H x W x D) [mm(in.)] | 170 mm x 86 mm x 74 mm (6.69 in. x 3.39 in. x 2.91 in.) |
Weight without packaging [kg(lb)] | 0.70 kg (1.54 lb) |
Storage | NAND Flash 512 MB; NOR Flash 16 MB |
Console port | BLE console |
Maximum power consumption [W] | 25.29 (excluding USB and PoE OUT ports) |
Maximum heat dissipation [BTU/hour] | 86.3 (without USB and PoE OUT) |
Power supply mode |
|
Rated input voltage [V] | 48 V |
Input voltage range [V] | DC: 43.2 V to 57.6 V PoE: 802.3bt/at |
Service port surge protection | PoE port: Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B Common mode (8 wires to ground): 6 kV (1.2/50 us, 42 ohms), criterion B |
Maximum PoE output power [W] | 13.6 W (When the maximum transmission distance through a CAT5E Ethernet cable is 40 m, the port can connect to an 802.3af-compliant PD requiring power of less than 12.95 W.) |
Maximum number of physical ports on the entire device | 2.5GE (RJ45) x 1, 10M/100M/1000M/2.5GE auto-sensing GE (RJ45) x 4, 10M/100M/1000M auto-sensing 10GE optical port (SFP+), GE/10GE auto-sensing |
Long-term operating temperature [Ā°C(Ā°F)] | 0Ā°C to 40Ā°C (32Ā°F to 104Ā°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum temperature of the device decreases by 1Ā°C [1.8Ā°F] for every 300 m [984.25 ft.] increase in altitude.) |
Storage temperature [Ā°C(Ā°F)] | ā40Ā°C to +70Ā°C (ā40Ā°F to +158Ā°F) |
Long-term operating relative humidity [RH] | 5% RH to 95% RH |
Long-term operating altitude [m(ft.)] | ā60 m to +5000 m (ā196.85 ft to +16404.20 ft) |
Atmospheric pressure [kPa] | 53kPa - 106kPa ETSI 300 019-2-3 |
Ground | floating ground |
USB | USB 2.0 |
IoT slot | IoT extension by USB |
BLE | BLE5.0 |
Radio number | 2 |
Operating frequency band |
|
MIMO spatial streams | Radio 0 (2.4 GHz): 2x2, maximum bandwidth of 40 MHz Radio 1 (5 GHz): 4x4, maximum bandwidth 160 MHz |
Wi-Fi standard | 2.4 GHz: 802.11b/g/n/ax 5 GHz: 802.11a/n/ac/ac Wave 2/ax |
Radio interface | Built-in smart antennas |
Antenna gain | 2.4 GHz: 4 dBi 5 GHz: 5 dBi BLE: 4 dBi |
Maximum transmit power | 2.4 GHz: 23 dBm 5 GHz: 26 dBm (Note: This is the total MIMO radio power, the same as: 2.4 GHz: 20 dBm/chain 5 GHz: 20 dBm/chain) BLE: < 10 dBm |
Singal radio transmit power [dBm] | 2.4G: -10 dBm to 20 dBm/chain 5G: -10 dBm to 20 dBm/chain |
MTBF [year] | 37 year |
MTTR [hour] | 0.5 hour |
Frequency stability [ppm] | +/-20 |
802.3bt power supply description | Wi-Fi:
Wired network port: The 2.5GE electrical port and SFP+ optical port work as combo ports. When one of them is working, the other is unavailable. The four downlink ports are all available. Other ports: not restricted |
802.3at power supply description | Wi-Fi:
Wired network port: The 2.5GE electrical port and SFP+ optical port work as combo ports. When one of them is working, the other is unavailable. The four downlink ports are all available. Other ports: Only the 2.5 W USB port is supported. The 5 W USB port and PoE OUT port are unavailable. |
802.3af power supply description | The 802.3af power supply is not supported. |
DC power supply description | Wi-Fi:
Wired network port: not restricted Other ports: not restricted |