Command Reference
S9300 and S9300X V200R019C10
This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
display multicast forwarding-table optimization-mode configuration
Function
The display multicast forwarding-table optimization-mode configuration command displays the configuration of the optimization mode in which Layer 3 multicast forwarding entries are stored.
Parameters
| Parameter | Description | Value |
|---|---|---|
| slot slot-id | slot-id specifies the slot of a specific LPU that uses the multicast optimization mode. If no slot ID is specified, configurations of all slots are displayed. |
The value is an integer and must be the slot ID of a running slot. |
Usage Guidelines
This command is used to display the configuration of the optimization mode in which Layer 3 multicast forwarding entries are stored. The configuration helps you select a slot based on your storage requirement.
Example
# Display the configuration of the optimization modes of all LPUs.
<Quidway> display multicast forwarding-table optimization-mode configuration
Multicast forwarding-table optimization mode :
Slot Mode
-------------------------
2 Normal mode
4 Normal mode
5 Rich MCast mode
Item |
Description |
|---|---|
Multicast forwarding-table optimization mode |
When the multicast optimization mode is enabled. |
slot |
Slot ID of an LPU. |
mode |
Storage Mode. The following storage modes are available:
|