Command Reference
S9300 and S9300X V200R019C10
This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
display mac-address multicast
Function
The display mac-address multicast command displays the static multicast MAC address entries.
Parameters
Parameter |
Description |
Value |
|---|---|---|
mac-address |
Specifies a multicast MAC address. If this parameter is not specified, the system displays all the configured multicast MAC address entries. |
The value is in the H-H-H format. An H contains 1 to 4 hexadecimal digits. |
vlan vlan-id |
Displays multicast MAC address entries in a specified VLAN. If this parameter is not specified, the system displays multicast MAC address entries in all VLANs. |
The value is an integer that ranges from 1 to 4094. |
Usage Guidelines
This command displays static multicast MAC address entries. To configure a static multicast MAC address on the device, use the mac-address multicast interface or mac-address multicast command.
Example
# Display static multicast MAC address entries in VLAN 10.
<Quidway> display mac-address multicast vlan 10 --------------------------------------------------------------------------- MAC Address VLANID Out-Interface Status --------------------------------------------------------------------------- 0111-1111-2222 10 GigabitEthernet1/0/1 InActive GigabitEthernet1/0/2 InActive 2 port(s) --------------------------------------------------------------------------- Total Group(s) : 1
Item |
Description |
|---|---|
MAC Address |
Static multicast MAC address. |
VLANID |
VLAN that the interface bound to the multicast MAC address belongs to. |
Out-Interface |
Interface bound to the multicast MAC address. |
Total Group(s) |
Total number of multicast groups. |