S12700 and S12700E V200R019C10 Command Reference
This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.
display auto-defend whitelist
Function
The display auto-defend whitelist command displays information about the attack source tracing whitelist.
Parameters
Parameter |
Description |
Value |
---|---|---|
slot slot-id |
Displays information about the attack source tracing whitelist in a specified slot. |
Set the value according to the device configuration. |
mcu |
Displays information about the attack source tracing whitelist on the main control unit. |
- |
Usage Guidelines
After the whitelist for attack source tracing is configured or when you locate faults on network, run the display auto-defend whitelist command to verify whitelist information. If no whitelist is configured, the command displays no whitelist information.
Example
# Display information about the attack source tracing whitelist on the card in slot 1.
<HUAWEI> display auto-defend whitelist slot 1 Protocol Interface IP ACL Status ------------------------------------------------------------------------------- DHCP GE1/0/1 -- -- auto DHCP GE1/0/2 -- -- auto
Item |
Description |
---|---|
Protocol |
Protocol type of the packets excluded from attack source tracing. |
Interface |
Interface on which inbound packets are excluded from attack source tracing. |
IP |
Source IP address of the packets excluded from attack source tracing. If not source IP address is specified in the whitelist rule, this field displays --. |
ACL |
ACL number specified in a manually configured whitelist rule. If the whitelist rule is automatically delivered, this field displays --. |
Status |
Type of the whitelist rule, which can be:
|