SmartACU2000D Smart Array Controller User Manual (with No PID Module)
This document describes the SmartACU2000D smart array control cabinet (with no PID Module), that is, the smart array control unit in terms of installation, cable connections, commissioning, and maintenance.
Pole-mounted Installation
- If you need to pole-mount the SACU, prepare pole mounting brackets based on the dimensions of the SACU. For details about the dimensions, see Dimensions.
- You are advised to use M12 U-shaped bolts to secure the pole-mounting brackets.
Figures provided in this section are for reference only. The actual poles and pole-mounting brackets prevail.
- Secure the pole-mounting brackets to the pole and tighten the U-shaped bolts to a torque of 45 N·m using a torque wrench with the open end of 18 mm (0.71 in.).Figure 4-8 Securing pole-mounting brackets
- Secure the SACU to the pole-mounting brackets. For detailed operations, see Support-mounted Installation.Figure 4-9 Securing a cabinet
Document ID:EDOC1100127888
Views:39459
Downloads:1880
Average rating:0.0Points