Huawei OptiXstar EG8145X6 Quick Start for QR code 01
Indicator Description
Indicator |
Status |
Description |
|---|---|---|
Power |
Steady on |
The ONT is powered on. |
Off |
The power supply is cut off. |
|
PON/LOS |
See the following table. |
|
LAN1-LAN4 |
Steady on |
The Ethernet connection is in the normal state. |
Blinking |
Data is being transmitted over the Ethernet port. |
|
Off |
The Ethernet connection is not set up. |
|
TEL |
Steady on |
The ONT is registered with the softswitch but no service flows are transmitted. |
Blinks twice a second |
The ONT is registered with the softswitch, and data is being transmitted onthe port. |
|
Blinks once every 2 seconds |
The ONT fails to be registered with the softswitch. |
|
Off |
The POTS port is disabled. |
|
USB |
Steady on |
The USB port is connected and working in the host mode, but no data is transmitted. |
Blinking |
Data is being transmitted on the USB port. |
|
Off |
The system is not powered on or the USB port is not connected. |
|
WLAN |
Steady on |
The WLAN function is enabled. |
Blinking |
Data is being transmitted over the WLAN port. |
|
Off |
The WLAN function is disabled. |
|
WPS |
Steady on |
The WPS function is enabled. |
Blinking |
A Wi-Fi terminal is accessing the system. |
|
Off |
The WPS function is disabled. |
|
Status No. |
PON Status |
LOS Status |
Description |
|---|---|---|---|
1 |
Off |
Off |
The ONT is prohibited by the upper-layer device or blinks abnormally. Contact the service provider for help. |
2 |
Blinks twice a second |
Blinks twice a second |
|
3 |
Blinks twice a second |
Off |
The ONT attempts to set up a connection with its upper-layer device. |
4 |
Steady on |
Off |
A connection is set up between the ONT and its upper-layer device. |
5 |
Off |
Blinks once every 2 seconds |
The ONT is not connected to fibers or does not receive optical signals. |
6 |
Blinks once every 2 seconds |
Blinks once every 2 seconds |
The hardware is faulty. |
If the ONT is not powered on or the power switch is turned off, all indicators are off.