1.3.6.1.4.1.2011.6.139.18.1.2.1.1

hwWlanStaMac

MacAddress

accessible-for-notify

This object indicates the MAC address of a STA, which identifies the STA and functions as the index for querying association information about the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.2

hwWlanStaUsername

OCTET STRING

read-only

This object indicates the user name.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.3

hwWlanStaApMac

MacAddress

read-only

This object indicates the MAC address of the AP with which the STA associates.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.4

hwWlanStaApName

OCTET STRING

read-only

This object indicates the name of the AP with which the STA associates.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.5

hwWlanStaApGroup

OCTET STRING

read-only

This object indicates the AP group to which the STA belongs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.6

hwWlanStaRadioId

Unsigned32

read-only

This object indicates the ID of the radio with which the STA associates.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.7

hwWlanStaAssocBand

Unsigned32{2.4G(1),5G(2)}

read-only

This object indicates the frequency band where the STA resides.

• 2.4G(1): 2.4G frequency band
• 5G(2): 5G frequency band

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.8

hwWlanStaSupportBand

Unsigned32

read-only

This object indicates the frequency band supported by the STA, in bits.

This object is in bitmap format. The bit value 1 indicates a corresponding frequency band.

• bit0 (1): 2.4G
• bit1 (1): 5G

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.9

hwWlanStaAccessChannel

Integer32

read-only

This object indicates the channel that the STA accesses.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.10

hwWlanStaRfMode

INTEGER{dotb(1),dotg(2),dotn(3),dota(4),dotac(5),dotax(6)}

read-only

This object indicates the radio mode of the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.11

hwWlanStaHtMode

INTEGER{invalid(1),ht40(2),ht20(3),ht80(4),ht160(5)}

read-only

This object indicates the HT mode of the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.12

hwWlanStaMcsVal

Unsigned32

read-only

This object indicates the MCS value of the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.13

hwWlanStaShortGIStatus

INTEGER{nonsupport(1),support(2)}

read-only

This object indicates whether the STA supports the short GI.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.14

hwWlanStaConnectRxRate

Unsigned32

read-only

This object indicates the rate at which the AP receives packets from the STA, in Mbit/s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.15

hwWlanStaConnectTxRate

Unsigned32

read-only

This object indicates the rate at which the AP sends packets to the STA, in Mbit/s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.16

hwWlanStaEssName

OCTET STRING

read-only

This object indicates the ESS with which the STA associates.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.17

hwWlanStaBSSID

MacAddress

read-only

This object indicates the air interface address for STA management.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.18

hwWlanStaSsid

OCTET STRING

read-only

This object indicates the SSID with which the STA associates.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.19

hwWlanStaStatus

INTEGER{age(1),associatedNotAuthenticated(2),associatedAndAuthenticated(3),roam(4)}

read-only

This object indicates the STA's online status.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.20

hwWlanStaAuthenMethod

INTEGER{wepOpenSystem(1),wepOpenSystemMac(2),wepOpenSystem8021X(3),wepOpenSystemPortal(4),wepShareKey(5),wepShareKeyMac(6),wepShareKey8021X(7),wepShareKeyPortal(8),wpa8021X(9),wpaPreShareKey(10),wpaPskMac(11),wpaPskPortal(12),wpa2Dot1x(13),wpa2PreShareKey(14),wpa2PskMac(15),wpa2PskPortal(16),wapiCertification(17),wapiPreShareKey(18),wpaWpa2PreShareKey(19),wpaWpa2PskMac(20),wpaWpa2PskPortal(21),wpaWpa2Dot1x(22),wapiPskPortal(23),macDot1x(24),wepShareKey8021XMac(25),wpa8021XMac(26),wpa2Dot1xMac(27),wpaWpa2Dot1xMac(28),wepOpenSystemPortalMac(29),wepShareKeyPortalMac(30),wpaPskPortalMac(31),wpa2PskPortalMac(32),wpaWpa2PskPortalMac(33),wapiPskPortalMac(34),wpaPpsk(35),wpaPpskMac(36),wpaPpskPortal(37),wpaPpskPortalMac(38),wpa2Ppsk(39),wpa2PpskMac(40),wpa2PpskPortal(41),wpa2PpskPortalMac(42),wpaWpa2Ppsk(43),wpaWpa2PpskMac(44),wpaWpa2PpskPortal(45),wpaWpa2PpskPortalMac(46),wep8021X(47),wpa3Dot1x(48),wpa3Dot1xMac(49),wpa3Sae(50),wpa3SaePortal(51),wpa3SaeMac(52),wpa3SaePortalMac(53),wpa2PskWpa3Sae(54),wpa2PskWpa3SaePortal(55),wpa2PskWpa3SaePortalMac(56),wpa2PskWpa3SaeMac(57)}

read-only

This object indicates the STA's authentication method.

In the current version, the values wpa3Dot1x(48), wpa3Dot1xMac(49), wpa3Sae(50), wpa3SaePortal(51), wpa3SaeMac(52), wpa3SaePortalMac(53), wpa2PskWpa3Sae(54), wpa2PskWpa3SaePortal(55), wpa2PskWpa3SaePortalMac(56), and wpa2PskWpa3SaeMac(57) do not take effect.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.21

hwWlanStaEncryptMethod

INTEGER{wpiSms4(1),wep40(2),wep104(3),tkip(4) ccmp(5),none(6)}

read-only

This object indicates the STA's encryption method.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.22

hwWlanStaQosMode

INTEGER{wmm(1),null(2)}

read-only

This object indicates the QoS mode of the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.23

hwWlanStaRoamStatus

INTEGER{no(1),yes(2)}

read-only

This object indicates the roaming status of the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.24

hwWlanStaVlan

Unsigned32

read-only

This object indicates the STA VLAN.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.25

hwWlanStaIP

IpAddress

read-only

This object indicates the STA IP address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.27

hwWlanStaGateway

IpAddress

read-only

This object indicates the user gateway.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.28

hwWlanStaAssocTime

Integer32

read-only

This object indicates the initial association time of the STA.

The value is the number of seconds elapsed since 00:00:00 of January 1, 1970.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.29

hwWlanStaAccessTime

Integer32

read-only

This object indicates the time when user authentication starts.

If non-authentication is configured, the value of this object is equal to hwStaAssociateTime. If other authentication modes, especially, Portal authentication, are configured, the value of this object is larger than hwStaAssociateTime.

The value is the number of seconds elapsed since 00:00:00 of January 1, 1970.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.30

hwWlanStaOnlineTime

Integer32

read-only

This object indicates the association duration of the STA (online duration), which is timed from its first association.

The value is the number of seconds elapsed since 00:00:00 of January 1, 1970.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.31

hwWlanStaAccessOnlineTime

Integer32

read-only

This object indicates the time elapsed since the STA passes the authentication. This object applies only to Portal authentication STAs, in seconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.32

hwWlanStaStatOperMode

INTEGER{invalid(1),clearstatistic(2)}

read-write

This object indicates that STA statistics are cleared.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.33

hwWlanStaWirelessStatRxFrames

Counter64

read-only

This object indicates the number of upstream frames received by the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.34

hwWlanStaWirelessRxBytes

Counter64

read-only

This object indicates the number of upstream bytes received by the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.35

hwWlanStaWirelessRxRate

Unsigned32

read-only

This object indicates the upstream rate of the STA, in bit/s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.36

hwWlanStaWirelessStatTxFrames

Counter64

read-only

This object indicates the number of downstream frames received by the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.37

hwWlanStaWirelessTxBytes

Counter64

read-only

This object indicates the number of downstream bytes received by the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.38

hwWlanStaWirelessTxRate

Unsigned32

read-only

This object indicates the downstream rate of the STA, in bit/s.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.39

hwWlanStaPeriodSendDropFrames

Counter64

read-only

This object indicates the number of downstream packets (frames) discarded at the wireless side within the echo interval.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.40

hwWlanStaPeriodReSendFrames

Counter64

read-only

This object indicates the number of downstream packets (frames) retransmitted at the wireless side within the echo interval.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.42

hwWlanStaRssi

Integer32

read-only

This object indicates the received signal strength indicator (RSSI) of the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.44

hwWlanStaSnrUs

Integer32

read-only

This object indicates the upstream SNR of the STA. The value is measured on the AP, in 0.1 dB. The special value 0x7FFFFFFF indicates that the measured value exceeds the threshold and 0x7FFFFFFE indicates that the measured value cannot be obtained at present.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.45

hwWlanStaRxPowerUs

Integer32

read-only

This object indicates the upstream receive power of the STA. The value is measured on the AP, in 0.1 dB. The special value 0x7FFFFFFF indicates that the measured value exceeds the threshold and 0x7FFFFFFE indicates that the measured value cannot be obtained at present.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.46

hwWlanStaChannelUtilRate

Unsigned32

read-only

This object indicates the utilization of the STA channel, in %.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.47

hwWlanStaChannelBusyRate

Unsigned32

read-only

This object indicates the busy rate of the STA channel, in %.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.48

hwWlanStaChannelTxRatio

Unsigned32

read-only

This object indicates the packet sending ratio of the STA channel, in %.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.49

hwWlanStaChannelRxRatio

Unsigned32

read-only

This object indicates the packet receiving ratio of the STA channel, in %.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.50

hwWlanStaChannelFreeRate

Unsigned32

read-only

This object indicates the idle rate of the STA channel, in %.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.51

hwWlanStaChannelInterfRate

Unsigned32

read-only

This object indicates the interference ratio of the STA channel, in %.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.52

hwWlanStaPeriodSendFrames

Unsigned32

read-only

This object indicates the number of downstream frames received within the echo interval.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.53

hwWlanStaApId

Unsigned32

read-only

This object indicates the AP ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.54

hwWlanStationUapsdCapacity

Unsigned32

read-only

This object indicates the service status of the Unscheduled Automatic Power Save Delivery (U-APSD).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.55

hwWlanStationPowerSavePercent

Unsigned32

read-only

This object indicates the percentage of power saved on the STA.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.56

hwWlanStaAssocStartTime

Unsigned32

read-only

This object indicates the start time when the STA sends an association request.

The value is the number of seconds elapsed since 00:00:00 of January 1, 1970.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.57

hwWlanStaAssocSuccessTime

Unsigned32

read-only

This object indicates the time when the STA is successfully associated.

The value is the number of seconds elapsed since 00:00:00 of January 1, 1970.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.58

hwWlanStaAuthStartTime

Unsigned32

read-only

This object indicates the time when the STA sends an authentication request.

The value is the number of seconds elapsed since 00:00:00 of January 1, 1970.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.59

hwWlanStaAuthSuccessTime

Unsigned32

read-only

This object indicates the time when the STA is successfully authenticated.

The value is the number of seconds elapsed since 00:00:00 of January 1, 1970.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.60

hwWlanStaDhcpStartTime

Unsigned32

read-only

This object indicates the time when the STA starts to send DHCP packets for obtaining an IP address.

The value is the number of seconds elapsed since 00:00:00 of January 1, 1970.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.61

hwWlanStaDhcpSuccessTime

Unsigned32

read-only

This object indicates the time when the STA successfully obtains an IP address through DHCP packets.

The value is the number of seconds elapsed since 00:00:00 of January 1, 1970.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.62

hwWlanStaVHTCapable

INTEGER{nonsupport(1),support(2)}

read-only

This object indicates whether the STA supports 802.11ac.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.63

hwWlanStaVHTTxBFCapable

INTEGER{nonsupport(1),support(2)}

read-only

This object indicates whether the STA supports 802.11ac explicit beamforming.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.64

hwWlanStaMUMIMOCapable

INTEGER{nonsupport(1),support(2)}

read-only

This object indicates whether the STA supports MU-MIMO.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.65

hwWlanStaWpaStartTime

Unsigned32

read-only

This object indicates the time when the STA starts to negotiate a WPA key with an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.66

hwWlanStaWpaSuccessTime

Unsigned32

read-only

This object indicates the time when the STA successfully negotiates a WPA key with an AP.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.67

hwWlanStaWirelessPacketDelay

Unsigned32

read-only

This object indicates the average delay for online STAs to send packets, in milliseconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.68

hwWlanStaAccessSuccessRate

Unsigned32

read-only

This object indicates the STA access success rate.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.69

hwWlanStaTotalAccessTime

Unsigned32

read-only

This object indicates the total online duration of the STA, in milliseconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.71

hwWlanStaAssocDuration

Unsigned32

read-only

This object indicates the STA association duration, in milliseconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.72

hwWlanStaWpaDuration

Unsigned32

read-only

This object indicates the WPA key negotiation duration, in milliseconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.73

hwWlanStaAuthDuration

Unsigned32

read-only

This object indicates the STA authentication duration, in milliseconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.74

hwWlanStaDhcpDuration

Unsigned32

read-only

This object indicates the time taken for the STA to obtain an IP address through DHCP, in milliseconds.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.77

hwWlanStaWirelessStatRxIPv6Frames

Counter64

read-only

This object indicates the IPv6 downstream traffic rate statistics.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.78

hwWlanStaWirelessRxIPv6Bytes

Counter64

read-only

This object indicates the number of bytes in the IPv6 downstream traffic.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.79

hwWlanStaWirelessStatTxIPv6Frames

Counter64

read-only

This object indicates the IPv6 upstream traffic rate statistics.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.18.1.2.1.80

hwWlanStaWirelessTxIPv6Bytes

Counter64

read-only

This object indicates the number of bytes in the IPv6 upstream traffic.

This object is implemented as defined in the corresponding MIB file.