Downloading the Driver and Firmware Installation Packages

1. Obtain the software based on the server CPU architecture.
   • If the ARM architecture is used, log in to TaiShanServer iDriver and select a version to go to the software list page.
   • If the x86 architecture is used, log in to FusionServer iDriver and select a version to go to the software list page.

2. Download the installation packages.
   • Firmware installation package: Select FW from Software Type and download the firmware installation package of the corresponding component.
   • Driver installation package: Download the driver package (* iDriver-*.zip) corresponding to the OS type.

     In the TaiShan Server iDriver (ARM architecture) or FusionServer iDriver (x86 architecture) version mapping table, find Card Name of the NIC and RAID controller card based on the OS version and confirm the driver package name.

     • Driver File: package where the driver file is located
     • Onboard ISO Driver contain Files: name of the driver file
     • FW Version: firmware version

Verifying the Software Package Integrity

To prevent a software package from being maliciously tampered with during transmission or storage, download the corresponding digital signature file for integrity verification when downloading the software package.

After the software package is downloaded from the Support website, verify its PGP digital signature by referring to the OpenPGP Signature Verification Guide. If the verification fails, do not use the software package. Contact Huawei technical support.

Before a software package is used for installation or upgrade, its digital signature also needs to be verified by referring to the OpenPGP Signature Verification Guide to ensure that the software package has not been tampered with.

For carriers, visit https://support.huawei.com/carrier/digitalSignatureAction.

For enterprises, visit https://support.huawei.com/enterprise/en/tool/pgp-verify-TL1000000054.