SupportDocumentationSwitchesCampus SwitchS100&S200&S300&S500&S600&S700Reference GuidesCommand Reference

S300, S500, S1700, S2700, S5700, and S6700 V200R021C00, C01 Command Reference

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.

This document describes all the configuration commands of the device, including the command function, syntax, parameters, views, default level, usage guidelines, examples, and related commands.

telnet enable

telnet enable

Function

The telnet enable command enables Telnet on an AP.

The undo telnet enable command disables Telnet on an AP.

By default, Telnet is disabled on an AP.

Format

telnet enable

undo telnet enable

Parameters

None

Views

AP system profile view

Default Level

2: Configuration level

Usage Guidelines

You do not need to log in to a Telnet-enabled AP from a user terminal to maintain it locally. Instead, you can log in to the Telnet-enabled AP through Telnet to remotely configure and maintain it.

To improve login security, you are advised to run the undo stelnet server disable command to enable the STelnet server function and log in to the AP through STelnet.

Example

# Enable Telnet on an AP.

<HUAWEI> system-view
[HUAWEI] wlan 
[HUAWEI-wlan-view] ap-system-profile name ap-system1
[HUAWEI-wlan-ap-system-prof-ap-system1] telnet enable
Translation
Favorite
Download
Update Date：2025-01-17
Document ID：EDOC1100214493
Views：2608304
Downloads：2035
Average rating：0.0Points

Related Documents

Digital Signature File

digtal sigature tool