FusionSolar App and SUN2000 App Device Commissioning Guide
Downloading and Installing the App
- Mobile phone operating system: Android 8.0, iOS 13.0, or later versions (The iOS operating system does not support local commissioning of iSitePower-M. Use an Android operating system instead.)
- To ensure the stability of each function, you are advised to use mobile phones running Android 8.0, iOS 13.0, or later versions. (For the mobile phones running iOS, iPhone 6 and later versions are supported, but iPhone SE series are not supported.)
- Use mobile phones that support the access to the Internet.
- Use mobile phones that support the WLAN function.
- The router supports 2.4 GHz WLAN, and the WLAN signal reaches the device.
- The WPA, WPA2, or WPA/WPA2 encryption mode is recommended for routers. The Enterprise mode is not supported (such as airport WLAN and other public hotspots that require authentication). WEP and WPA TKIP are not recommended because they have serious security vulnerabilities. If the access fails in WEP mode, log in to the router and change the encryption mode of the router to WPA2 or WPA/WPA2.
Procedure
Method 1: Download and install the app from the app store.
- Huawei mobile phone users: Search for FusionSolar or SUN2000 in Huawei AppGallery.
- iPhone users: Search for FusionSolar or SUN2000 in the App Store.
Method 2: Scan the QR code to download and install the app.
Users who select method 2 can select the download method based on the mobile phone type.
- Huawei mobile phone users: Download from Huawei AppGallery.
- Non-Huawei phone users: Download on a browser.
When you select Download via the Browser, if a security warning message is displayed indicating that the app is from an external source, tap ALLOW.
Document ID：EDOC1100273864
Views：103201
Downloads：99256
Average rating：3.17Points