WLAN Hardware Installation and Maintenance Guide
AirEngine 6776I-X6ETH
Overview
| Item | Details |
|---|---|
| Description | AirEngine6776I-X6ETH(11be outdoor,2+2+4 tri bands,external antenna,USB,BLE) |
| Part Number | 50088012 |
| Model | AirEngine 6776I-X6ETH |
| First supported version | V600R024C10 |
Appearance
Ports
1 |
2.4G&5G_A~B |
2 |
GE/PoE_IN |
3 |
10GE/PoE_IN |
4 |
SFP+ |
5 |
USB |
6 |
Security slot |
7 |
5G/6G_C~F&IOT |
8 |
DC port |
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| 10GE/PoE_IN | RJ45 | Ethernet electrical port that supports 100M/1000M/2.5G/5G/10G auto-sensing, connects to the wired Ethernet, and supports PoE input. | Network cable |
| GE/PoE_IN | RJ45 | Ethernet electrical port that supports 10M/100M/1000M auto-sensing, connects to the wired Ethernet, and supports PoE input. | Network cable |
| SFP+ | SFP+ | Ethernet uplink optical port, which supports 1G/2.5G/10G auto-sensing and works with a matching optical module. | Optical module |
| USB | USB 2.0 Type A | Connects to an IoT terminal to implement IoT applications. | IoT module |
| 2.4G&5G_A and B | N-Type Female | Connects to a dual-band (2.4 GHz + 5 GHz) antenna for transmitting and receiving service signals. | Antenna |
| 5G/6G_C to F&IOT | N-Type Female | Connects to a 5 GHz or 6 GHz antenna for transmitting and receiving service signals. | Antenna |
| DC port | Phoenix terminal block | DC power port, used in DC power supply scenarios and supporting a voltage range of 18 V to 60 V. | Phoenix terminal block |
Indicators and Buttons
1 |
Indicator |
2 |
Default |
| Silkscreen | Name | Color | Status | Description |
|---|---|---|---|---|
| SYS | System indicator | - | Off | The system is not running. |
| Green | Steady on |
|
||
| Green | Slow blinking (0.5 Hz) | The AP is running properly, the Ethernet connection is normal, and STAs are associated with the AP. | ||
| Green | Slow blinking (0.2 Hz) | The AP is running properly, the Ethernet connection is normal, and no STA is associated with the AP. | ||
| Green | Blinking once every 0.25s (4 Hz) |
|
||
| Yellow (blinking red and green at the same time, causing color deviation) | Blinking once every 0.25s (4 Hz) | Hold down the Default button for more than 6 seconds to restore the factory settings. | ||
| Red | Steady on | The system is faulty. | ||
| LINK/ACT0 to 2 | Port indicator | Green | Blinking | The Ethernet connection is normal. |
| - | Off | The port is in link-down state. | ||
| WIRELESS0 | Radio 0 status indicator (service traffic mode) | - | Off | Radios or all associated VAPs are disabled, and no STA is connected to the AP. |
| Green | Steady on | The AP has STAs connected, but no data is being transmitted. | ||
| Green | Blinking | The AP has STAs connected and is transmitting data traffic. The indicator blinks more quickly when more data is being transmitted. | ||
| WIRELESS1 | Radio 1 status indicator (service traffic mode) | - | Off | Radios or all associated VAPs are disabled, and no STA is connected to the AP. |
| Yellow | Steady on | The AP has STAs connected, but no data is being transmitted. | ||
| Yellow | Blinking | The AP has STAs connected and is transmitting data traffic. The indicator blinks more quickly when more data is being transmitted. | ||
| WIRELESS2 | Radio 2 status indicator (service traffic mode) | - | Off | Radios or all associated VAPs are disabled, and no STA is connected to the AP. |
| Blue | Steady on | The AP has STAs connected, but no data is being transmitted. | ||
| Blue | Blinking | The AP has STAs connected and is transmitting data traffic. The indicator blinks more quickly when more data is being transmitted. |
| Silkscreen | Name | Description |
|---|---|---|
| Default | Reset button | If you press the button, the device resets. If you hold down the button for more than 6 seconds, the SYS indicator blinks yellow (blinking red and green fast at the same time, causing color deviation), and the device restores the factory settings, switches to the Fit mode, and restarts. |
Technical Specifications
| Item | Specification |
|---|---|
| Installation Type |
|
| Dimensions without packaging (H x W x D) [mm(in.)] | 220 mm x 280 mm x 85 mm (8.66 in. x 11.02 in. x 3.35 in.) |
| Dimensions with packaging (H x W x D) [mm(in.)] | 185 mm x 570 mm x 380 mm (7.28 in. x 22.44 in. x 14.96 in.) |
| Weight without packaging [kg(lb)] | 3.70 kg (8.16 lb) |
| Weight with packaging [kg(lb)] | 5.69 kg (12.54 lb) |
| Storage | NAND Flash 512 MB |
| Console port | Bluetooth console |
| Maximum power consumption [W] | 33.9 (excluding USB) |
| Maximum heat dissipation [BTU/hour] | 109.9 BTU/hour |
| Power supply mode |
|
| Rated input voltage [V] | DC: 18 V to 60 V PoE: 802.3bt/at |
| Input voltage range [V] | PoE: 802.3bt/at When multiple ports are used for receive PoE power: If the power supply classes are different, the port with the highest power class is used. If the power supply classes are the same, power supply backup can be implemented. |
| Service port surge protection | PoE port: Surge: Differential mode: 1.5 kV (D.1), 10/700 us, 15 ohms + 25 ohms, criterion B Differential mode: 1.5 kV (D.2), 10/700 us, 15 ohms + 25 ohms, criterion C Common mode: 6 kV (C.3), 10/700 us, 15 ohms + 25 ohms/wire, criterion B: 6) Differential mode: 1 kV (D.1), 1.2/50 us, 42 ohms, criterion B; Differential mode: 1 kV (D.2), 1.2/50 us, 42 ohms, criterion B; Common mode: 2 kV (C.3), 1.2/50 us, 2 ohms + 40 ohms x n/wire, criterion B Inrush current: Differential mode: 250 A (D.2), 8/20 μs, criterion C Common mode: 6 kA/8-wire, 8/20 us, criterion C |
| PoE OUT | Not supported |
| Maximum number of physical ports on the entire device | 10GE (RJ45) x 1, 100M/1000M/2500M/5000M/10GE auto-sensing GE (RJ45) x 1, 10M/100M/1000M auto-sensing 10GE optical (SFP+), GE/2.5GE/10GE auto-sensing |
| Long-term operating temperature [°C(°F)] | –40°C to +70°C (–40°F to +158°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum ambient temperature decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.) |
| Storage temperature [°C(°F)] | –40°C to +85°C (–40°F to +185°F) |
| Long-term operating relative humidity [RH] | Operating humidity: 0% RH to 100% RH Storage humidity: 5% RH to 95% RH (non-condensing) |
| Long-term operating altitude [m(ft.)] | –60 m to +5000 m (–196.85 ft to +16404.20 ft) |
| Atmospheric pressure [kPa] | 53kPa - 106kPa ETSI 300 019-2-3 |
| Ingress protection level (dustproof/waterproof) | IP68 |
| Ground | Grounding |
| Antenna port surge protection [kA] | 5 kA surge protection capability without external surge protection devices |
| Wind resistance | 67 m/s |
| USB | USB 2.0, power supply: 2.5 W/5 W |
| IoT slot | Not supported |
| BLE | BLE5.2 |
| Radio number | 3 |
| Operating frequency band |
|
| MIMO spatial streams | Triple-radio 6G mode:
Triple-radio dual-5G mode:
|
| Wi-Fi standard | 2.4 GHz: 802.11b/g/n/ax/be 5 GHz: 802.11a/n/ac/ac Wave 2/ax/be 6 GHz: 802.11a/ax/be |
| Radio interface | External antenna |
| Antenna gain | BLE: 5 dBi |
| Maximum transmit power | Triple-radio 6G mode: 2.4G: 25 dBm/chain 28 dBm (combined power) 5G: 24 dBm/chain 27 dBm (combined power) 6G: 23 dBm/chain 29 dBm (combined power) BLE: < 10 dBm Triple-radio dual-5G mode: 2.4G: 25 dBm/chain 28 dBm (combined power) 5G: 24 dBm/chain 27 dBm (combined power) 5G: 23 dBm/chain 29 dBm (combined power) BLE: < 10 dBm |
| Singal radio transmit power [dBm] | Triple-radio 6G mode: 2.4G: -10 dBm to 25 dBm/chain 5G: -10 dBm to 24 dBm/chain 6G: -10 dBm to 23 dBm/chain Triple-radio dual-5G mode: 2.4G: -10 dBm to 25 dBm/chain 5G: -10 dBm to 24 dBm/chain 5G: -10 dBm to 23 dBm/chain |
| MTBF [year] | 68.95098523 year |
| MTTR [hour] | 2 hour |
| Frequency stability [ppm] | +/-20 |
| 802.3bt power supply description | The power supply mode is negotiated to 802.3bt, and no function is restricted. |
| 802.3at power supply description | When the power supply mode is negotiated to 802.3at: The maximum bandwidth is 20 MHz at the 2.4 GHz frequency band and 80 MHz at the 5 GHz frequency band, the USB port is unavailable, and other functions are not restricted. |
| DC power supply description | No function is limited. |