SupportDocumentationRoutersService RoutersNE40EReference GuidesCommand Reference

NE40E V800R022C00SPC600 Diagnose

UPRESAOM Diagnostic Commands

UPRESAOM Diagnostic Commands

debugging res-agt

Function

The debugging res-agt command enables the debugging of the UPRES_AGENT component.

The undo debugging res-agt command disables the debugging of the UPRES_AGENT component.

By default, the debugging of the UPRES_AGENT component is disabled.

Format

debugging res-agt [ commom | devm | ulpu | vpn | flow-statistics ] { all | error | event | message | info } [ slave ]

undo debugging res-agt [ commom | devm | ulpu | vpn | flow-statistics ] { all | error | event | message | info } [ slave ]

Parameters

Parameter Description Value
commom

Indicates a common module.

-
devm

Indicates the device management module.

-
ulpu

Indicates the ULPU module.

-
vpn

Indicates the VPN module.

-
flow-statistics

Indicates the flow statistics collection module.

-
all

Enables all debugging functions.

-
error

Displays error information.

-
event

Displays event information.

-
message

Displays message information.

-
info

Displays informational information.

-
slave

Slave.

-

Views

Diagnostic view

Default Level

3: Management level

Task Name and Operations

Task Name Operations
bras-control debug

Usage Guidelines

To enable the debugging of the UPRES_AGENT component, run the debugging res-agt command.

Example

# Enable all debugging functions of the UPRES_AGENT component.
<HUAWEI> system-view
[~HUAWEI] diagnose
[~HUAWEI-diagnose] debugging res-agt all

display res-agt blackbox

Function

The display res-agt blackbox command displays the black box records of the UPRES_AGENT component.

Format

display res-agt blackbox module-name [ slave ]

Parameters

Parameter Description Value
module-name

Specifies a module name.

The value is a string of 1 to 49 case-sensitive characters. It cannot contain spaces.
slave

slave board.

-

Views

Diagnostic view

Default Level

3: Management level

Task Name and Operations

Task Name Operations
bras-control debug

Usage Guidelines

Usage Scenario

To check the black box records of the UPRES_AGENT component, run the display res-agt blackbox command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the black box records of the UPRES_AGENT component.
<HUAWEI> system-view
[~HUAWEI] diagnose
[~HUAWEI-diagnose] display res-agt blackbox ulpu
[2021-05-21 04:53:50.150] Send cumode info: operation[2], slotid[4], cnt[0], upfenodegrp[0x81040000], optype[0].
[2021-05-21 04:53:50.150] Send cumode info: operation[2], slotid[3], cnt[0], upfenodegrp[0x81030000], optype[1].
[2021-05-21 04:53:50.110] Send cumode info: operation[1], slotid[4], cnt[0], upfenodegrp[0x81040000], optype[0].
[2021-05-21 04:53:50.110] Send cumode info: operation[1], slotid[3], cnt[0], upfenodegrp[0x81030000], optype[0].
Table 2-1663 Description of the display res-agt blackbox command output
Item Description
Msg

Contents of a black box event record.

display res-agt data

Function

The display res-agt data command displays the data table of the UPRES_AGENT component.

Format

display res-agt data devm [ slot slot-id ] [ slave ]

display res-agt data fenode [ slot slot-id ] [ slave ]

display res-agt data of-state [ slave ]

display res-agt data tbtp [ slave ]

display res-agt data cu-mode [ slot slot-id ] [ slave ]

display res-agt data ifindex2slot [ slave ]

display res-agt data cu-count [ slave ]

display res-agt data up-vpn [ slave ]

display res-agt data lgbindslot [ slave ]

display res-agt data pwvebindlg [ slave ]

display res-agt data veglobal [ slave ]

display res-agt data veport [ slave ]

display res-agt data mmgr [ slave ]

Parameters

Parameter Description Value
slot slot-id

Specifies a slot ID.

The value is a string of 0 to 15 case-sensitive characters. It cannot contain spaces.
slave

Indicates the slave main control board.

-
fenode

Displays FeNode data.

-
of-state

Displays CUSP status information.

-
tbtp

Displays TBTP information.

-
cu-mode

Displays CU mode data.

-
ifindex2slot

Displays the mapping between interface indexes and slots.

-
cu-count

Displays CU-Count data.

-
up-vpn

Displays UP-side VPN data.

-
mmgr

Displays MMGR instance information.

-
devm

Displays device management data.

-

Views

Diagnostic view

Default Level

3: Management level

Task Name and Operations

Task Name Operations
bras-control debug

Usage Guidelines

Usage Scenario

If a service problem occurs, run the display res-agt data command to query the data table of the UPRES_AGENT component. The command output facilitates problem locating.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display CU-mode statistics about the main interface collected by the UPRES_AGENT component.
<HUAWEI> system-view
[~HUAWEI] diagnose
[~HUAWEI-diagnose] display res-agt data cu-count
--------------------
 MAIN_IFINDEX   COUNT
 --------------------
 0x9            1
# Display device management data collected by the UPRES_AGENT component.
<HUAWEI> system-view
[~HUAWEI] diagnose
[~HUAWEI-diagnose] display res-agt data devm
----------------------------------------------------------
 UPSLOT     POS_ID       DEVICETYPE   ATTR_ID      ATTR_VAL
 ----------------------------------------------------------
 1          0x101ffff    0x2          0xe          0x0
 2          0x102ffff    0x2          0xe          0x0
 3          0x10300ff    0x9          0x4          0x400000da
 3          0x10300ff    0x9          0x83         0x1
 3          0x10300ff    0x12         0xe          0x1
 3          0x10301ff    0x9          0x4          0x400000da
# Display VPN data collected by the UPRES_AGENT component.
<HUAWEI> system-view
[~HUAWEI] diagnose
[~HUAWEI-diagnose] display res-agt data up-vpn
---------------------------
 IDENTIFIER          UPVRFID
 ---------------------------
 0X1:0X2             3
# Display the mappings between interface indexes and boards collected by the UPRES_AGENT component.
<HUAWEI> system-view
[~HUAWEI] diagnose
[~HUAWEI-diagnose] display res-agt data ifindex2slot
----------------------------------
 IFINDEX      MAIN_IFINDEX   SLOTID
 ----------------------------------
 0x9          0x9              3
 0xb          0xb              3
# Display FeNode data collected by the UPRES_AGENT component.
<HUAWEI> system-view
[~HUAWEI] diagnose
[~HUAWEI-diagnose] display res-agt data fenode
---------------------------------
 UPSLOT     FENODEGRP
 ---------------------------------
 3          0x81030000
 4          0x81040000
 17         0x81110000
 18         0x81120000
# Display channel status data collected by the UPRES_AGENT component.
<HUAWEI> system-view
[~HUAWEI] diagnose
[~HUAWEI-diagnose] display res-agt data of-state
------------------------------
 IPADDR       STATUS     IS_SUB
 ------------------------------
 0X6060608    DOWN       TRUE
# Display board CU-mode statistics collected by the UPRES_AGENT component.
<HUAWEI> system-view
[~HUAWEI] diagnose
[~HUAWEI-diagnose] display res-agt data cu-mode
-------------------------------
 UPSLOT     INTF_COUNT    OPTYPE
 -------------------------------
 3          2             ENABLE
# Display Mmgr instance information of the UPRES_AGENT component.
<HUAWEI> system-view
[~HUAWEI] diagnose
[~HUAWEI-diagnose] display res-agt data mmgr
 MMGR
  -------------------------------------MMGR---------------------------------:
  Send id                   : 14419088  Peer id                 : 14222482  PeerQueue id           : 6
  Timer Value               : 5000      Send Timer Value        : 5000      Recv Timer Value       : 18000000
  Max Send Count            : 200       Max Packet Len          : 65535     Back Count             : 6
  Flow Ctrl                 : No        Peer Status             :
  Once Send Entry Count     : 0         Once Max Count          : 1         Msg Sn Type Count      : 10
  Wait Send Count           : 0         Proc Send Entry Count   : 11370     Send Count             : 11370
  Merge Count               : 0         Pack tlv Count          : 0         Msg Sn Type Count      : 11370
  Pack msg Count            : 11354     Send msg Failed Count   : 0         Send Transmsg Count    : 33
  Send Seqmsg Count         : 11337     Send Ifmmsg Count       : 0         Verify Tran Count      : 32
  Verify Seq Count          : 0         Verify Tran Failed Count: 0         Verify Seq Failed Count: 0
  Msg Flow Ctrl Times       : 0         Encode Msg Failed Count : 0         Msg Resend Times       : 0
  Last Send msg Failed Count: 0         Last Msg Flow Ctrl Times: 0
Table 2-1664 Description of the display res-agt data command output
Item Description
MAIN_IFINDEX

Index of the main interface where the CU-mode is configured.
COUNT

CU-mode count of the main interface (including sub-interfaces).
UPSLOT

Slot ID.
POS_ID

Position.
DEVICETYPE

Device type.
ATTR_ID

Attribute ID.
ATTR_VAL

Attribute value.
IDENTIFIER

ID used to match the UP and CP VPNs.
UPVRFID

VPN VRFID configured on the UP side.
IFINDEX

Interface index.
SLOTID

Slot ID.
FENODEGRP

FeNodeGrp ID.
IPADDR

Local IP address of the channel.
STATUS

Channel status.
IS_SUB

Whether channel status is subscribed to:

  • TRUE: Channel status is subscribed to.
  • FALSE: Channel status is not subscribed to.
INTF_COUNT

CU-mode count of the board.
OPTYPE

Flag indicating whether the CU-mode is enabled.
MMGR

MMGR instance.

display res-agt partner status

Function

The display res-agt partner status command displays the status information of the UPRES_AGENT and partner components.

Format

display res-agt partner status [ slave ]

Parameters

Parameter Description Value
slave

slave board.

-

Views

Diagnostic view

Default Level

3: Management level

Task Name and Operations

Task Name Operations
bras-control debug

Usage Guidelines

Usage Scenario

If a service problem occurs, run the display res-agt partner status command to query the status information of the UPRES_AGENT and partner components. The command output facilitates problem locating.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the status information of the UPRES_AGENT and partner components.
<HUAWEI> system-view
[~HUAWEI] diagnose
[~HUAWEI-diagnose] display res-agt partner status
Partner PID: 0xfa0002      CompType: PDEVM
    State                 : AVAILABLE
    DelpoyMode            : LR
    DelpoyAttr            : 0x0
--------------------------------------------------
 Partner PID: 0x80fc0012    CompType: DEVMA
    State                 : AVAILABLE
    DelpoyMode            : OSNODE
    DelpoyAttr            : 0x111
--------------------------------------------------
 Partner PID: 0xfc0443      CompType: DEVMA
    State                 : AVAILABLE
    DelpoyMode            : OSNODE
    DelpoyAttr            : 0x8000103
--------------------------------------------------
Table 2-1665 Description of the display res-agt partner status command output
Item Description
Partner PID

PID of the partner component.
State

Subscription state.
DelpoyMode

Deployment mode.
DelpoyAttr

Deployment information.
CompType

Component type.

display res-agt statistics

Function

The display res-agt statistics command displays the diagnosis statistics of the UPRES_AGENT component.

Format

display res-agt statistics { message | database | system-resource } [ slave ]

Parameters

Parameter Description Value
message

Displays message diagnosis statistics.

-
database

Displays database diagnosis statistics.

-
system-resource

Displays system resource diagnosis statistics.

-
slave

slave board.

-

Views

Diagnostic view

Default Level

3: Management level

Task Name and Operations

Task Name Operations
bras-control debug

Usage Guidelines

To check the diagnosis statistics of the UPRES_AGENT component, run the display res-agt statistics command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display database change diagnosis statistics of the UPRES_AGENT component.
<HUAWEI> system-view
[~HUAWEI] diagnose
[~HUAWEI-diagnose] display res-agt statistics database
FlowInfo TBL:
           ADD:0             UPDATE:0             DEL:0           
 VPN Relation TBL:
           ADD:0             UPDATE:0             DEL:0           
 DEVM TBL:
           ADD:57            UPDATE:0             DEL:0           
 Partner TBL:
           ADD:0             UPDATE:0             DEL:0           
 Cu-mode TBL:
           ADD:2             UPDATE:0             DEL:0           
 Trunkmember TBL:
           ADD:0             UPDATE:0             DEL:0           
 CU Count TBL:
           ADD:5             UPDATE:0             DEL:2           
 Ifindex2Slot TBL:
           ADD:5             UPDATE:0             DEL:2           
 TBTP TBL:
           ADD:85            UPDATE:0             DEL:0           
 Fenode info TBL:
           ADD:3             UPDATE:0             DEL:0           
 OF-state TBL:
           ADD:3             UPDATE:0             DEL:2           
 OFAGT CFG TBL:
           ADD:1             UPDATE:0             DEL:0           
 Server id TBL:
           ADD:1             UPDATE:0             DEL:0           
 Partner state TBL:
           ADD:0             UPDATE:0             DEL:0
# Display message diagnosis statistics of the UPRES_AGENT component.
<HUAWEI> system-view
[~HUAWEI] diagnose
[~HUAWEI-diagnose] display res-agt statistics message
SSP->RESAGT:
          RecStartWork  :1               RecPartnerStatus  :0           
          RecNewBackup  :0               RecPromptPromary  :0           
          RecStopWork   :0               RecBackupGone     :0           
          RecStopPrimary:0           
OFC<->RESAGT:
          SendRegMsg        :1               RecRegAck        :0           
          SendSubscribeMsg  :3               RecSubscribeAck  :0           
          SendUnSubscribeMsg:2               RecUnSubscribeAck:0           
          RecConnectStateMsg:25              SendConnStateRsp :0           
          RecIPSSmoothReqMsg  :0             SendIPSSmoothBeginMsg  :0           
          RecIPSSmoothBeginACK:0             SendIPSSmoothDataMsg  :0           
          SendIPSSmoothEndMsg :0             RecIPSSmoothEndACK  :0           
DEVM<->RESAGT:
          RecDEVMAttrChgMsg  :273            SendDEVMAttrChgResp :0           
Other message:
          RecDecongestMsg :0              RecJobIMsg  :0
Table 2-1666 Description of the display res-agt statistics command output
Item Description
FlowInfo TBL

Flow statistics table (main interface).
VPN Relation TBL

VPN table.
DEVM TBL

Device management table.
Partner TBL

Component subscription relationship table.
Partner state TBL

Partner status table.
Cu-mode TBL

CU mode table.
Trunkmember TBL

Trunk member relationship table.
CU Count TBL

Table about the number of CU mode configuration times.
Ifindex2Slot TBL

Table about the mapping between the interface index and slot ID.
TBTP TBL

TbTP table.
Fenode info TBL

Fenode table.
OF-state TBL

Of status table.
OFAGT CFG TBL

OfAgt subscription information table.
Server id TBL

Server subscription information table.
RecStartWork

Number of received StartWork messages.
RecPartnerStatus

Number of received Partner status messages.
RecNewBackup

Number of received backup-to-primary messages.
RecPromptPromary

Number of received primary-to-backup messages.
RecStopWork

Number of received StopWork messages.
RecBackupGone

Number of received backup completion messages.
SendRegMsg

Number of sent registration request messages.
RecRegAck

Number of received registration reply messages.
SendSubscribeMsg

Number of sent subscription messages.
RecSubscribeAck

Number of received subscription reply messages.
SendConnStateRsp

Number of sent component connection request reply messages.
RecIPSSmoothReqMsg

Number of received smooth request messages.
SendIPSSmoothBeginMsg

Number of sent smooth start messages.
SendIPSSmoothDataMsg

Number of sent smooth data messages.
SendIPSSmoothEndMsg

Number of sent smooth end messages.
RecIPSSmoothEndACK

Number of received smooth end ACK messages.
RecDEVMAttrChgMsg

Number of received DEVM attribute change messages.
SendDEVMAttrChgResp

Number of sent DEVM attribute change messages.
RecDecongestMsg

Number of received smooth parsing messages.
RecJobIMsg

Number of received JOB messages.
RecStopPrimary

Number of received backup-to-primary failure messages.
SendUnSubscribeMsg

Number of sent unsubscription messages.
RecUnSubscribeAck

Number of received unsubscription reply messages.
RecConnectStateMsg

Number of received component connection requests.
RecIPSSmoothBeginACK

Number of received smooth start ACK messages.
UPDATE

Number of times the database is updated.
DEL

Number of times data is deleted from the database.
ADD

Number of times data is added to the database.

reset res-agt statistics

Function

The reset res-agt statistics command resets the diagnosis statistics of the UPRES_AGENT component.

Format

reset res-agt statistics { all | message | database | system-resource }

Parameters

Parameter Description Value
all

Resets all diagnosis statistics.

-
message

Resets message diagnosis statistics.

-
database

Resets database diagnosis statistics.

-
system-resource

Resets system resource diagnosis statistics.

-

Views

Diagnostic view

Default Level

3: Management level

Task Name and Operations

Task Name Operations
bras-control debug

Usage Guidelines

To reset the diagnosis statistics of the UPRES_AGENT component, run the reset res-agt statistics command.

Example

# Reset the diagnosis statistics of the UPRES_AGENT component.
<HUAWEI> system-view
[~HUAWEI] diagnose
[~HUAWEI-diagnose] reset res-agt statistics all
Translation
Favorite
Download
Update Date：2022-12-01
Document ID：EDOC1100279998
Views：390419
Downloads：247
Average rating：0.0Points

Related Documents

Digital Signature File

digtal sigature tool