F600C-30-1GH, F600P-30-1GH, and F600P-30-1GH1 V500R022C10 Web Page Reference 01

MAC Filtering

MAC Filtering

  1. In the navigation tree on the left, choose Advanced > Security > MAC Filtering. In the pane on the right, after enabling MAC filter and selecting the filter mode, click New. On the dialog box that is displayed, configure the MAC filter rule for the PC to access the Internet, as shown in Figure 8-15.
    Figure 8-15 MAC Address Filtering
  2. Click Apply.

The MAC address lists of PCs in the network are saved on the ONU. Configuring MAC filter rules enables the PCs that conform to the rules to access the Internet service or disables the PCs that do not conform to the rules to access the Internet service. A PC may have more than one IP addresses but can have only one unique MAC address. Therefore, configuring MAC filter rules effectively controls the Internet service access rights of PCs in a LAN.

Table 8-7 describes the parameters related to the MAC filter.

Table 8-7 Parameters related to the MAC address filter

Parameter

Description

Enable MAC filter

Indicates whether to enable the MAC address filter function.

Filter Mode

Indicates the MAC address filter rule of the blacklist or whitelist.

  • Blacklist: The data meeting the rule in the filter rule list is not allowed to pass.
  • Whitelist: The data meeting the rule in the filter rule list is allowed to pass.

The filter mode is global config mode. Therefore, the blacklist and whitelist mode cannot be used at the same time.

Device Name

Indicates the device name in the MAC address filter rule.

Source MAC Address

Indicates the source MAC address in the MAC address filter rule.

Translation
Favorite
Download
Update Date:2023-05-11
Document ID:EDOC1100300837
Views:59978
Downloads:152
Average rating:0.0Points

Digital Signature File

digtal sigature tool