SupportDocumentationSwitchesCampus SwitchS7700&S8700&S9700&S12700&S16700Developer DocumentsAPI Reference

S12700 and S12700E V200R023C00 NETCONF YANG API Reference

This document describes the NETCONF YANG API functions supported by the switch, including the data model and samples.

This document describes the NETCONF YANG API functions supported by the switch, including the data model and samples.

VLAN Management

VLAN Management

This section describes the configuration model of VLAN management and provides examples of XML packets.

Data Model

The configuration model files matching VLAN management are huawei-vlan.yang, huawei-forward-traffic-security.yang and ietf-interfaces.yang.

Table 2-218 VLAN management

Object

Description

Value

Remarks

/huawei-vlan:vlans/management-vlan/vlanid

Indicates a management VLAN ID

The value is an integer in the range from 1 to 4094.

N/A

/huawei-vlan:vlans/id

Indicates a VLAN ID.

The value is an integer in the range from 1 to 4094.

N/A

/huawei-vlan:vlan-pools/vlan-pool/name

Indicates the name of a VLAN pool.

The value is a string of 1 to 31 characters. The value cannot contain question marks (?) or spaces, and cannot begin or end with double quotation marks (" ").

N/A

/huawei-vlan:vlan-pools/vlan-pool/vlans

Indicates the range of VLANs added to the VLAN pool.

The value is in the format of start-vlan[..end-vlan ], where the value of start-vlan or end-vlan is an integer in the range from 1 to 4094. The value of start-vlan must be less than that of end-vlan. For example, 10..20 indicates that VLANs 10 to 20 are added to the VLAN pool.

A nonexistent VLAN can also be added to a VLAN pool. However, you need to create the VLAN after adding a nonexistent VLAN to a VLAN pool; otherwise, the VLAN does not take effect.

/huawei-vlan:vlan-pools/vlan-pool/assignment-method

Indicates the VLAN assignment algorithm in a VLAN pool.

The value is of the enumerated type:

  • even: Sets the VLAN assignment algorithm to even.
  • hash: Sets the VLAN assignment algorithm to hash.

N/A

/ietf-interfaces:interfaces/interface/huawei-vlan:vlan/port-link-type

Indicates the type of an interface.
The options are as follows:
  • access
  • hybrid
  • trunk
  • dot1q-tunnel

N/A

/ietf-interfaces:interfaces/interface/huawei-vlan:vlan/default-vlan

Indicates the default VLAN ID.

The value is an integer in the range from 1 to 4094.

N/A

/ietf-interfaces:interfaces/interface/huawei-vlan:vlan/trunk

Indicates the trunk type.

-

N/A

/ietf-interfaces:interfaces/interface/huawei-vlan:vlan/trunk-vlan

Indicates the VLANs allowed by a trunk interface.
  • If a VLAN list is configured, the value of each VLAN ID is an integer in the range from 1 to 4094.
  • If a VLAN range is configured, the value can only be 1..4094. That is, a trunk interface allows packets from all VLANs to pass.
NOTE:

The VLAN range and VLAN list are mutually exclusive.

N/A

/ietf-interfaces:interfaces/interface/huawei-vlan:vlan/hybrid

Indicates the hybrid type.

-

N/A

/ietf-interfaces:interfaces/interface/huawei-vlan:vlan/hybrid/tagged-vlan

Indicates the VLANs allowed by a hybrid interface. Frames of these VLANs pass through the interface in tagged mode.

The value is an integer in the range from 1 to 4094.

N/A

/ietf-interfaces:interfaces/interface/huawei-vlan:vlan/hybrid/untagged-vlan

Indicates the VLANs allowed by a hybrid interface. Frames of these VLANs pass through the interface in untagged mode.

The value is an integer in the range from 1 to 4094.

N/A

/ietf-interfaces:interfaces/interface/huawei-vlan:vlan/name

Indicates a VLAN name.

The value is a string of 1 to 31 case-sensitive characters. The question mark (?) is not supported.

N/A

/ietf-interfaces:interfaces/interface/huawei-vlan:vlan/description

Indicates the VLAN description.

The value is a string of 1 to 255 case-sensitive characters. The question mark (?) is not supported.

N/A

/huawei-vlan:vlans/vlan/huawei-traffic:traffic-security/ipv4-check-enable

Indicates whether IPv4 packet check is enabled in a VLAN.
The value is of the Boolean type:
  • true: enabled
  • false: disabled

The default value is false.

N/A

/huawei-vlan:vlans/vlan/huawei-traffic:traffic-security/ipv6-check-enable

Indicates whether IPv6 packet check is enabled in a VLAN.
The value is of the Boolean type:
  • true: enabled
  • false: disabled

The default value is false.

N/A

/huawei-vlan:vlans/vlan/huawei-traffic:traffic-security/arp-check-enable

Indicates whether ARP packet check is enabled in a VLAN.
The value is of the Boolean type:
  • true: enabled
  • false: disabled

The default value is false.

N/A

/huawei-vlan:vlans/vlan/huawei-traffic:traffic-security/arp-check-alarm-enable

Indicates whether the alarm function for ARP packet check is enabled in a VLAN.
The value is of the Boolean type:
  • true: enabled
  • false: disabled

The default value is false.

This object can be configured only when the /huawei-vlan:vlans/vlan/huawei-traffic:traffic-security/arp-check-enable object is set to true.

/huawei-vlan:vlans/vlan/huawei-traffic:traffic-security/arp-check-alarm-threshold

Specifies the alarm threshold for ARP packet check in a VLAN.

The value is an integer in the range from 1 to 1000.

This object can be configured only when the /huawei-vlan:vlans/vlan/huawei-traffic:traffic-security/arp-check-alarm-enable object is set to true.

/huawei-vlan:vlans/vlan/hw-traffic:traffic-security/ip-check-alarm-enable

Indicates whether the alarm function for IP packet check is enabled in a VLAN.
The value is of the Boolean type:
  • true: enabled
  • false: disabled

The default value is false.

This object can be configured when either /huawei-vlan:vlans/vlan/huawei-traffic:traffic-security/ipv4-check-enable or /huawei-vlan:vlans/vlan/huawei-traffic:traffic-security/ipv6-check-enable is set to true.

/huawei-vlan:vlans/vlan/hw-traffic:traffic-security/ip-check-alarm-threshold

Specifies the alarm threshold for IP packet check in a VLAN.

The value is an integer in the range from 1 to 1000.

This object can be configured only when the /huawei-vlan:vlans/vlan/hw-traffic:traffic-security/ip-check-alarm-enable object is set to true.

/huawei-vlan:vlans/vlan/ip-subnet-vlan/ip-prefix

Indicates the source IP address or network address and mask length for IP subnet-based VLAN assignment.

The value is in the format of ipv4-address/mask-length.

  • ipv4-address specifies the source IP address or network address. The value is in dotted decimal notation.
  • mask-length specifies the mask length. The value is an integer in the range from 0 to 32.

N/A

/huawei-vlan:vlans/vlan/ip-subnet-vlan/priority

Indicates the 802.1p priority of the VLAN associated with an IP address or subnet.

The value is an integer in the range from 0 to 7. A larger value indicates a higher priority. The default value is 0.

N/A

/ietf-interfaces:interfaces/interface/huawei-vlan:ip-subnet-vlan-enable/enable

Indicates whether IP subnet-based VLAN assignment is enabled on an interface.

The value is of the Boolean type:

  • true: enabled
  • false: disabled

The default value is false.

N/A

/huawei-vlan:vlans/vlan/unknown-flow-drop

Indicates whether unknown packet isolation is enabled in a VLAN.

The value is of the Boolean type:

  • true: enabled
  • false: disabled

The default value is false.

This function is supported only on the X series cards.

/huawei-vlan:vlan-pools/vlan-pool/vlan-in-pools/vlan-in-pool/begin-vlan-id

/huawei-vlan:vlan-pools/vlan-pool/vlan-in-pools/vlan-in-pool/end-vlan-id

Specifies a VLAN range.

The value is an integer in the range from 1 to 4094.

begin-vlan-id and end-vlan-id together specify a VLAN range. The value of begin-vlan-id must be less than that of end-vlan-id.

N/A

/huawei-vlan:vlan-pools/vlan-pool/vlan-in-pools/vlan-in-pool/max-user

Specifies the maximum number of users in a VLAN.

The value is an integer in the range from 1 to 10000.

This object takes effect only when the VLAN assignment algorithm in the VLAN pool is set to hash.

/huawei-vlan:vlan-pools/vlan-pool/lease/lease-time/unlimited

Indicates that user entries in a VLAN pool do not age.

-
  • This object takes effect only when the VLAN assignment algorithm in the VLAN pool is set to hash.
  • This object cannot be configured together with the following objects: /huawei-vlan:vlan-pools/vlan-pool/lease/lease-time/day, /huawei-vlan:vlan-pools/vlan-pool/lease/lease-time/hour, and /huawei-vlan:vlan-pools/vlan-pool/lease/lease-time/minute.

/huawei-vlan:vlan-pools/vlan-pool/lease/lease-time/day

Specifies the aging time (in days) of user entries in a VLAN pool.

The value is an integer in the range from 0 to 999, in days. The default value is 8 days.

This object takes effect only when the VLAN assignment algorithm in the VLAN pool is set to hash.

/huawei-vlan:vlan-pools/vlan-pool/lease/lease-time/hour

Specifies the aging time (in hours) of user entries in a VLAN pool.

The value is an integer in the range from 0 to 23, in hours. The default value is 0.

This object takes effect only when the VLAN assignment algorithm in the VLAN pool is set to hash.

/huawei-vlan:vlan-pools/vlan-pool/lease/lease-time/minute

Specifies the aging time (in minutes) of user entries in a VLAN pool.

The value is an integer in the range from 0 to 59, in minutes. The default value is 0.

This object takes effect only when the VLAN assignment algorithm in the VLAN pool is set to hash.

/huawei-vlan:vlan-pools/vlan-pool/dhcp-update-vlan-assignment/enable

Indicates whether to enable the function of reassigning VLANs in a VLAN pool.

The value is of the Boolean type:

  • true: The function is enabled.
  • false: The function is disabled.

The default value is false.

This object takes effect only when the VLAN assignment algorithm in the VLAN pool is set to hash.

/huawei-vlan:vlan-pools/vlan-pool/vlan-max-block-time/block-time

Specifies the lockout time of VLANs in a VLAN pool.

The value is an integer in the range from 60 to 1440, in minutes. The default value is 60.

This object takes effect only when the VLAN assignment algorithm in the VLAN pool is set to hash.

Changing the Management VLAN

This section describes how to change the management VLAN using the rpc method.

Table 2-219 Changing the management VLAN

Operation

XPATH

rpc

/huawei-vlan:vlans/management-vlan/vlanid

Data requirement

Table 2-220 Changing the management VLAN

Item

Data

Description

VLAN ID

100

Changes the management VLAN to VLAN 100.

Request Example

<?xml version='1.0' encoding='UTF-8'?>
<rpc message-id="17" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
    <edit-config>
        <target>
            <running/>
        </target>
        <config>
            <huawei-vlan:vlans xmlns:huawei-vlan="urn:huawei:params:xml:ns:yang:huawei-vlan">
                <huawei-vlan:vlan>
                    <huawei-vlan:id>100</huawei-vlan:id>
                </huawei-vlan:vlan>
                <huawei-vlan:management-vlan>
                    <huawei-vlan:vlanid>100</huawei-vlan:vlanid>
                </huawei-vlan:management-vlan>
            </huawei-vlan:vlans>
        </config>
    </edit-config>
</rpc>

Response Example

Sample of successful response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="17">
    <ok/>
</rpc-reply>

Sample of failed response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="18">
    <rpc-error>
        <error-type>application</error-type>
        <error-tag>operation-failed</error-tag>
        <error-severity>error</error-severity>
        <error-message>parse rpc config error.</error-message>
    </rpc-error>
</rpc-reply>

Creating VLAN

This section describes how to create VLAN using the rpc method.

Table 2-221 Creating VLAN

Operation

XPATH

rpc

/huawei-vlan:vlans/id

Data Requirements

Table 2-222 Creating VLAN

Item

Data

Description

VLAN ID

100

Indicates that VLAN 100 is created.

Request Example

<?xml version='1.0' encoding='UTF-8'?>
<rpc message-id="25" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
    <edit-config>
        <target>
            <running/>
        </target>
        <config>
            <huawei-vlan:vlans xmlns:huawei-vlan="urn:huawei:params:xml:ns:yang:huawei-vlan">
                <huawei-vlan:vlan>
                    <huawei-vlan:id>100</huawei-vlan:id>
                </huawei-vlan:vlan>
            </huawei-vlan:vlans>
        </config>
    </edit-config>
</rpc>

Response Example

Sample of successful response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="25">
    <ok/>
</rpc-reply>

Sample of failed response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="26">
    <rpc-error>
        <error-type>application</error-type>
        <error-tag>operation-failed</error-tag>
        <error-severity>error</error-severity>
        <error-message>parse rpc config error.</error-message>
    </rpc-error>
</rpc-reply>

Adding Interfaces to VLAN

This section describes how to add interfaces to VLAN using the rpc method.

Table 2-223 Adding interfaces to VLAN

Operation

XPATH

edit-config:create

/ietf-interfaces:interfaces/interface/huawei-vlan:vlan/id

Data Requirements

Table 2-224 Adding interfaces to VLAN

Item

Data

Description

VLAN ID

100, 101, 102

Adds interfaces to VLANs 100, 101, and 102.

Request Example

<?xml version='1.0' encoding='UTF-8'?>
<rpc message-id="6" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
    <edit-config>
        <target>
            <running/>
        </target>
        <config>
            <if:interfaces xmlns:if="urn:ietf:params:xml:ns:yang:ietf-interfaces">
                <if:interface>
                    <if:name>GigabitEthernet1/0/3</if:name>
                    <if:type xmlns:iana-if-type="urn:ietf:params:xml:ns:yang:iana-if-type">iana-if-type:ethernetCsmacd</if:type>
                    <huawei-vlan:vlan xmlns:huawei-vlan="urn:huawei:params:xml:ns:yang:huawei-vlan">
                        <huawei-vlan:port-link-type>trunk</huawei-vlan:port-link-type>
                        <huawei-vlan:trunk>
                            <huawei-vlan:trunk-vlan>100</huawei-vlan:trunk-vlan>
                        </huawei-vlan:trunk>
                        <huawei-vlan:trunk>
                            <huawei-vlan:trunk-vlan>101</huawei-vlan:trunk-vlan>
                        </huawei-vlan:trunk>
                        <huawei-vlan:trunk>
                            <huawei-vlan:trunk-vlan>102</huawei-vlan:trunk-vlan>
                        </huawei-vlan:trunk>
                    </huawei-vlan:vlan>
                </if:interface>
            </if:interfaces>
        </config>
    </edit-config>
</rpc>

Response Example

Sample of successful response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="6">
    <ok/>
</rpc-reply>

Sample of failed response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="7">
    <rpc-error>
        <error-type>application</error-type>
        <error-tag>operation-failed</error-tag>
        <error-severity>error</error-severity>
        <error-message>parse rpc config error.</error-message>
    </rpc-error>
</rpc-reply>

Change VLAN description and name

This chapter mainly introduces the configuration description and name under xml based on VLAN.

Table 2-225 Change VLAN description and name

Operation

XPATH

RPC

/huawei-vlan:vlans/name

/huawei-vlan:vlans/description

Data Requirements

Table 2-226 Change VLAN description and name

Item

Data

Description

VLAN name

1000

Change the VLAN name to 1000.

VLAN description

2000

Change the VLAN description to 2000.

Request Example

<?xml version='1.0' encoding='UTF-8'?>
<rpc message-id="1" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <edit-config>
    <target>
      <running/>
    </target>
    <config>
      <huawei-vlan:vlans xmlns:huawei-vlan="urn:huawei:params:xml:ns:yang:huawei-vlan">
        <huawei-vlan:vlan>
          <huawei-vlan:id>100</huawei-vlan:id>
          <huawei-vlan:name>1000</huawei-vlan:name>
          <huawei-vlan:description>2000</huawei-vlan:description>
        </huawei-vlan:vlan>
      </huawei-vlan:vlans>
    </config>
  </edit-config>
</rpc>

Response Example

Sample of successful response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1">
  <ok/>
</rpc-reply>

Sample of failed response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="2">
  <rpc-error>
    <error-app-tag>1</error-app-tag>
    <error-message>Service process failed.</error-message>
    <error-info>Error on node /huawei-vlan:vlans/vlan[id="100"]/description</error-info>
  </rpc-error>
</rpc-reply>

Creating a VLAN Pool

This section provides a sample of configuring a VLAN pool using the config method.

Table 2-227 Creating a VLAN pool

Operation

XPATH

edit-config:config
  • /huawei-vlan:vlan-pools/vlan-pool/name
  • /huawei-vlan:vlan-pools/vlan-pool/vlans
  • /huawei-vlan:vlan-pools/vlan-pool/assignment-method
  • /huawei-vlan:vlan-pools/vlan-pool/dhcp-update-vlan-assignment/enable
  • /huawei-vlan:vlan-pools/vlan-pool/vlan-max-block-time/block-time

Data Requirements

Item

Data

Description

Name of a VLAN pool

april

Name of the VLAN pool is april.

Range of VLANs added to the VLAN pool

10..20

Add VLAN 10 to VLAN 20 to the VLAN pool.

VLAN assignment algorithm in a VLAN pool

hash

Sets the VLAN assignment algorithm to hash.

Whether to enable the function of reassigning VLANs in a VLAN pool

true

Enable the function of reassigning VLANs in a VLAN pool.

Lockout time of VLANs

200

Set the lockout time of VLANs to 200 minutes.

Request Example

<?xml version='1.0' encoding='UTF-8'?>
<rpc message-id="6" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <edit-config>
    <target>
      <running/>
    </target>
    <config>
      <huawei-vlan:vlan-pools xmlns:huawei-vlan="urn:huawei:params:xml:ns:yang:huawei-vlan">
        <huawei-vlan:vlan-pool>
          <huawei-vlan:name>april</huawei-vlan:name>
          <huawei-vlan:vlans>10..20</huawei-vlan:vlans>
          <huawei-vlan:assignment-method>hash</huawei-vlan:assignment-method>
          <huawei-vlan:dhcp-update-vlan-assignment>
            <huawei-vlan:enable>true</huawei-vlan:enable>
          </huawei-vlan:dhcp-update-vlan-assignment>
          <huawei-vlan:vlan-max-block-time>
            <huawei-vlan:block-time>200</huawei-vlan:block-time>
          </huawei-vlan:vlan-max-block-time>
        </huawei-vlan:vlan-pool>
      </huawei-vlan:vlan-pools>
    </config>
  </edit-config>
</rpc>

Response Example

Sample of successful response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="6">
  <ok/>
</rpc-reply>

Sample of failed response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="6">
  <rpc-error>
    <error-type>application</error-type>
    <error-tag>operation-failed</error-tag>
    <error-severity>error</error-severity>
    <error-path>/huawei-vlan:vlan-pools/vlan-pool[name='april']/vlans[.='10-20']</error-path>
    <error-message>parse rpc config error.(Invalid value in "vlans" element.).</error-message>
  </rpc-error>
</rpc-reply>

Enabling IP packet check in a VLAN

This section describes how to enable IP packet check in a VLAN using the rpc method.

Table 2-228 Enabling IP packet check in a VLAN

Operation

XPATH

edit-config:merge

/huawei-vlan:vlans/id

/huawei-vlan:vlans/vlan/huawei-traffic:traffic-security/ipv4-check-enable

/huawei-vlan:vlans/vlan/huawei-traffic:traffic-security/ipv6-check-enable

/huawei-vlan:vlans/vlan/huawei-traffic:traffic-security/arp-check-enable

Data Requirements

Table 2-229 Enabling IP packet check in a VLAN

Item

Data

Description

VLAN ID

100

-

Whether IPv4 packet check is enabled in a VLAN

true

-

Whether IPv6 packet check is enabled in a VLAN

true

-

Whether ARP packet check is enabled in a VLAN

true

-

Request Example

<?xml version="1.0" encoding="utf-8"?>
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1">
  <edit-config>
    <target>
      <running/>
    </target>
    <config>
      <huawei-vlan:vlans xmlns:huawei-vlan="urn:huawei:params:xml:ns:yang:huawei-vlan">
        <huawei-vlan:vlan>
          <huawei-vlan:id>100</huawei-vlan:id>
          <hw-traffic:traffic-security xmlns:hw-traffic="urn:huawei:params:xml:ns:yang:huawei-traffic">
            <hw-traffic:ipv4-check-enable>true</hw-traffic:ipv4-check-enable>
            <hw-traffic:ipv6-check-enable>true</hw-traffic:ipv6-check-enable>
            <hw-traffic:arp-check-enable>true</hw-traffic:arp-check-enable>
          </hw-traffic:traffic-security>
        </huawei-vlan:vlan>
      </huawei-vlan:vlans>
    </config>
  </edit-config>
</rpc>

Response Example

Sample of successful response

<?xml version='1.0' encoding='UTF-8'?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1">
  <ok/>
</rpc-reply>

Sample of failed response

<?xml version="1.0" encoding="utf-8"?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="23">
  <rpc-error>
    <error-type>application</error-type>
    <error-tag>operation-failed</error-tag>
    <error-severity>error</error-severity>
    <error-path>/huawei-vlan:vlans/vlan[id='100']/huawei-traffic:traffic-security/ipv4-check-enable</error-path>
    <error-message>parse rpc config error.(Invalid value in "ipv4-check-enable" element.).</error-message>
  </rpc-error>
</rpc-reply>

Configuring IP Subnet-based VLAN Assignment on an Interface

This section provides a sample of configuring IP subnet-based VLAN assignment on an interface using the edit-config method.

Table 2-230 Configuring IP subnet-based VLAN assignment on an interface

Operation

XPATH

edit-config:config

/huawei-vlan:vlans/vlan/ip-subnet-vlan

/ietf-interfaces:interfaces/interface/huawei-vlan:ip-subnet-vlan-enable/enable

Data Requirements

Table 2-231 Configuring IP subnet-based VLAN assignment on an interface

Item

Data

VLAN ID

5

Source IP address or network address and mask length for IP subnet-based VLAN assignment

10.1.1.1/24

802.1p priority of the VLAN associated with an IP address or subnet

3

Interface on which IP subnet-based VLAN assignment is enabled

Eth-Trunk1

Whether IP subnet-based VLAN assignment is enabled on an interface

true

Request Example

<?xml version="1.0" encoding="utf-8"?>
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1">
  <edit-config>
    <target>
      <running/>
    </target>
    <config xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
      <vlans xmlns="urn:huawei:params:xml:ns:yang:huawei-vlan">
        <vlan nc:operation="replace">
          <id>5</id>
          <ip-subnet-vlan>
            <ip-prefix>10.1.1.1/24</ip-prefix>
            <priority>3</priority>
          </ip-subnet-vlan>
        </vlan>
      </vlans>
      <if:interfaces nc:operation="replace" xmlns:if="urn:ietf:params:xml:ns:yang:ietf-interfaces">
        <if:interface>
          <if:name>Eth-Trunk1</if:name>
          <if:type xmlns:ianaift="urn:ietf:params:xml:ns:yang:iana-if-type">ianaift:ethernetCsmacd</if:type>
          <huawei-vlan:ip-subnet-vlan-enable xmlns:huawei-vlan="urn:huawei:params:xml:ns:yang:huawei-vlan">
            <huawei-vlan:enable>true</huawei-vlan:enable>
          </huawei-vlan:ip-subnet-vlan-enable>
        </if:interface>
      </if:interfaces>
    </config>
  </edit-config>
</rpc>

Deletion Example

<?xml version="1.0" encoding="utf-8"?>
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="2">
  <edit-config>
    <target>
      <running/>
    </target>
    <config xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
      <vlans xmlns="urn:huawei:params:xml:ns:yang:huawei-vlan">
        <vlan nc:operation="replace">
          <id>5</id>
        </vlan>
      </vlans>
      <if:interfaces nc:operation="replace" xmlns:if="urn:ietf:params:xml:ns:yang:ietf-interfaces">
        <if:interface>
          <if:name>Eth-Trunk1</if:name>
          <if:type xmlns:ianaift="urn:ietf:params:xml:ns:yang:iana-if-type">ianaift:ethernetCsmacd</if:type>
        </if:interface>
      </if:interfaces>
    </config>
  </edit-config>
</rpc>

Response Example

Sample of successful response

<?xml version="1.0" encoding="utf-8"?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1">
  <ok/>
</rpc-reply>

Sample of failed response

<?xml version="1.0" encoding="utf-8"?>
<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1">
  <rpc-error>
    <error-app-tag>-1</error-app-tag>
    <error-message> Invalid IP address.</error-message>
    <error-info>Error on node /huawei-vlan:vlans/vlan[id="6"]</error-info>
  </rpc-error>
</rpc-reply>
Translation
Favorite
Download
Update Date：2025-04-18
Document ID：EDOC1100333807
Views：37891
Downloads：178
Average rating：0.0Points

Related Documents

Digital Signature File

digtal sigature tool