LUNA2000-S1 User Manual
M:LUNA2000-7-S1,LUNA2000-14-S1,LUNA2000-21-S1
M:LUNA2000-7-S1,LUNA2000-14-S1,LUNA2000-21-S1
About This Document
Purpose
This document describes the product information, application scenarios, installation, commissioning, maintenance, and technical specifications of the energy storage system (ESS) that consists of the LUNA2000-10KW-C1 Energy Storage Control Unit and the LUNA2000-7-E1 Energy Storage Modules.
Intended Audience
This document is intended for:
- Sales engineers
- System engineers
- Technical support engineers
- End users
Symbol Conventions
The symbols that may be found in this manual are defined as follows.
Symbol |
Description |
|---|---|
|
Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury. |
|
Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury. |
|
Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Supplements the important information in the main text. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.
Issue 05 (2025-06-15)
- Added ESS Low Power Settings(Smart Dongle Networking).
- Added 6.4.7 ESS Low Power Settings(EMMA Networking).
- Updated 7.3 Troubleshooting.
- Updated 7.6 Battery Health Check.
- Added 7.7 SOC Correction.
- Updated 4.5.1 Floor Mounting.
Issue 04 (2024-10-30)
Updated 7.4 ESS Replacement by modifying the ESS replacement procedure.
Issue 03 (2024-09-30)
Updated 2.3.2 ESS Working Modes by modifying the description of the third-party scheduling function.
Issue 02 (2024-07-20)
- Updated 2.1 Overview by modifying the description of the ESS capacity.
- Updated 2.3.1 Networking by modifying the mapping relationship and the description of connecting multiple ESSs to the inverter.
- Updated 2.3.2 ESS Working Modes by adding the third-party dispatch mode.
- Updated 2.4 Label Description by optimizing the label description.
- Updated 4.5 Installing the ESS by adding the method of taking out the Energy Storage Module.
- Updated 5.1 Preparing Cables by adding the description of connecting cables to network ports.
- Updated 5.5 Installing Signal Cables by adding the description of connecting multiple ESSs and connecting cables to network ports.
- Updated 6.3.2 Setting ESS Parameters by adding the description of third-party dispatch.
- Updated 6.4.2 Setting ESS Parameters by adding the description of third-party dispatch.
- Updated 7.3 Troubleshooting by modifying the alarm description.
Issue 01 (2024-03-30)
This issue is the first official release.