SUN2000-(5K-12K)-MAP0 Series User Manual
M:SUN2000-5K-MAP0,SUN2000-6K-MAP0,SUN2000-8K-MAP0,SUN2000-10K-MAP0,SUN2000-10K-MAP0-BE,SUN2000-12K-MAP0,SUN2000-5K-MAP0-ZH,SUN2000-6K-MAP0-ZH,SUN2000-8K-MAP0-ZH,SUN2000-10K-MAP0-ZH,SUN2000-12K-MAP0-ZH;Smart PV inverter, Smart PV Controller, Cascading, AFCI, dry contact scheduling, dry contact function, IPS self-check, rapid shutdown
M:SUN2000-5K-MAP0,SUN2000-6K-MAP0,SUN2000-8K-MAP0,SUN2000-10K-MAP0,SUN2000-10K-MAP0-BE,SUN2000-12K-MAP0,SUN2000-5K-MAP0-ZH,SUN2000-6K-MAP0-ZH,SUN2000-8K-MAP0-ZH,SUN2000-10K-MAP0-ZH,SUN2000-12K-MAP0-ZH;Smart PV inverter, Smart PV Controller, Cascading, AFCI, dry contact scheduling, dry contact function, IPS self-check, rapid shutdown
5.7.8 Connecting the Battery Signal Cable
Cable Connection
The following figure shows the cable connection between the inverter and the battery.
Figure 5-39 Cable connection
![]()
Table 5-4 Cable connection description
RJ45 |
Cable Color |
Definition |
|---|---|---|
1 |
White-and-orange |
485A |
2 |
Orange |
485B |
3 |
White-and-green |
- |
4 |
Blue |
- |
5 |
White-and-blue |
- |
6 |
Green |
- |
7 |
White and brown |
GND/Enable- |
8 |
Brown |
EN/Enable+ |
Procedure
- Connect the RJ45 connector of the battery signal cable to the RJ45 port.Figure 5-40 Installing the cable
![]()
Document ID：EDOC1100366802
Views：46731
Downloads：5925
Average rating：0.0Points