SupportDocumentationRoutersService RoutersNetEngine 8000Learn About ProductsHardware Description

NetEngine 8000 M14, M8 and M4 V800R023C10SPC500 Hardware Description

Describes the chassis, power supply, fans, boards, optical modules, and power distribution box of the NetEngine 8000 M14K, M14, M8K, M8, M4, 8000E M14, M8.

Describes the chassis, power supply, fans, boards, optical modules, and power distribution box of the NetEngine 8000 M14K, M14, M8K, M8, M4, 8000E M14, M8.

Interface Card

Interface Card

CR2D000DE110 (16-Port E1 Physical Interface Card(75ohm))

Overview

Table 1-563 Basic information about the CR2D000DE110
Item Details
Description 16-Port E1 Physical Interface Card(75ohm)
Part Number 03030RFA
Model CR2D000DE110
Card type Interface Card
Silkscreen 16xE1-75

Appearance

Figure 1-124 Appearance of the CR2D000DE110

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03030RFA&productModel=CR2D000DE110#matchRelation

Indicators

Table 1-564 Indicators on the CR2D000DE110
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the PIC is faulty.
Yellow Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.

Ports

Table 1-565 Ports on the CR2D000DE110
Port Connector Type Description Available Components
E1(0-15) Anea 96 16 E1 interfaces

75-Ohm 16 x E1 Cables
Table 1-566 Port attributes about the CR2D000DE110
Attributes Details
Working mode Full-duplex
Standards compliance IMA 1.1, RFC4717, RFC4385, RFC4816, RFC5086, RFC4553_SATOP, and RFC1662
Frame format Non-framed, CRC4 and NO-CRC4
Interface code HDB3
Stated bit rate 2048 kbit/s

Functions and Features

Table 1-567 Functions and features of the CR2D000DE110
Functions and Features Description
Basic function Supports a maximum of 16 E1 interfaces. Services on each interface can be configured.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No
Link protocol TDM, PPP, MP, ATM, IMA

Technical Specifications

Table 1-568 Technical specifications of the CR2D000DE110
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.5 kg (1.1 lb)
Weight with packaging [kg(lb)] 0.9 kg (1.98 lb)
Typical power consumption [W] 9.5 W
Typical heat dissipation [BTU/hour] 30.66 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR2D000DE111 (16-Port E1 Physical Interface Card(120ohm))

Overview

Table 1-569 Basic information about the CR2D000DE111
Item Details
Description 16-Port E1 Physical Interface Card(120ohm)
Part Number 03030REY
Model CR2D000DE111
Card type Interface Card
Silkscreen 16xE1-120

Appearance

Figure 1-125 Appearance of the CR2D000DE111

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03030REY&productModel=CR2D000DE111#matchRelation

Indicators

Table 1-570 Indicators on the CR2D000DE111
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the PIC is faulty.
Yellow Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.

Ports

Table 1-571 Ports on the CR2D000DE111
Port Connector Type Description Available Components
E1(0-15) Anea 96 16 E1 interfaces

120-Ohm 16 x E1 Cables
Table 1-572 Port attributes about the CR2D000DE111
Attributes Details
Working mode Full-duplex
Standards compliance IMA 1.1, RFC4717, RFC4385, RFC4816, RFC5086, RFC4553_SATOP, and RFC1662
Frame format Non-framed, CRC4 and NO-CRC4
Interface code HDB3
Stated bit rate 2048 kbit/s

Functions and Features

Table 1-573 Functions and features of the CR2D000DE111
Functions and Features Description
Basic function Supports a maximum of 16 E1 interfaces. Services on each interface can be configured.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No
Link protocol TDM, PPP, MP, ATM, IMA

Technical Specifications

Table 1-574 Technical specifications of the CR2D000DE111
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.5 kg (1.1 lb)
Weight with packaging [kg(lb)] 0.9 kg (1.98 lb)
Typical power consumption [W] 9.5 W
Typical heat dissipation [BTU/hour] 30.66 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR2D000EM890 (6 Channels E&M Interface Board)

Overview

Table 1-575 Basic information about the CR2D000EM890
Item Details
Description 6 Channels E&M Interface Board
Part Number 03032VFA
Model CR2D000EM890
Card type Interface Card
Silkscreen AT6
Remarks -

Appearance

Figure 1-126 Appearance of the CR2D000EM890

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03032VFA&productModel=CR2D000EM890#matchRelation

Indicators

Table 1-576 Indicators on the CR2D000EM890
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The PIC is working properly.
Red Steady on The hardware on the PIC is faulty.
Orange Steady on The PIC is not loaded with the logic.
- Off The PIC is powered off or is not registered.

Ports

Table 1-577 Ports on the CR2D000EM890
Port Connector Type Description Available Components
EM0 to EM5 RJ45 6-channel E&M

Prepare cables based on the actual interface type of the peer device. Shielded cables are recommended.
Table 1-578 Port attributes about the CR2D000EM890
Attributes Details
Working mode Full-duplex
Frame format PWE3

Functions and Features

Table 1-579 Functions and features of the CR2D000EM890
Functions and Features Description
Basic function

Occupies one flexible card slot.

Supports the line-rate receiving and transmitting on six E&M interfaces.
Reliability and availability Hot swappable.
Restrictions and remarks Not applicable to outdoor scenarios.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-580 Technical specifications of the CR2D000EM890
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.5 kg (1.1 lb)
Weight with packaging [kg(lb)] 0.9 kg (1.98 lb)
Typical power consumption [W] 10 W
Typical heat dissipation [BTU/hour] 32.44 BTU/hour
Long-term operating temperature [°C(°F)] –5°C to +55°C (23°F to 131°F)

CR2D000IE110 (32-Port E1 Physical Interface Card(75ohm))

Overview

Table 1-581 Basic information about the CR2D000IE110
Item Details
Description 32-Port E1 Physical Interface Card(75ohm)
Part Number 03030QCQ
Model CR2D000IE110
Card type Interface Card
Silkscreen 32xE1-75

Appearance

Figure 1-127 Appearance of the CR2D000IE110

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03030QCQ&productModel=CR2D000IE110#matchRelation

Indicators

Table 1-582 Indicators on the CR2D000IE110
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the PIC is faulty.
Yellow Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.

Ports

Table 1-583 Ports on the CR2D000IE110
Port Connector Type Description Available Components
E1(0-15) E1(16-31) Anea 96 32 E1 interfaces

75-Ohm 16 x E1 Cables
Table 1-584 Port attributes about the CR2D000IE110
Attributes Details
Working mode Full-duplex
Standards compliance IMA 1.1, RFC4717, RFC4385, RFC4816, RFC5086, RFC4553_SATOP, and RFC1662
Frame format Non-framed, CRC4 and NO-CRC4
Interface code HDB3
Stated bit rate 2048 kbit/s

Functions and Features

Table 1-585 Functions and features of the CR2D000IE110
Functions and Features Description
Basic function Supports a maximum of 32 E1 interfaces. Services on each interface can be configured.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No
Link protocol TDM, PPP, MP, ATM, IMA

Technical Specifications

Table 1-586 Technical specifications of the CR2D000IE110
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.5 kg (1.1 lb)
Weight with packaging [kg(lb)] 0.9 kg (1.98 lb)
Typical power consumption [W] 13.5 W
Typical heat dissipation [BTU/hour] 43.8 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR2D000IE111 (32-Port E1 Physical Interface Card(120ohm))

Overview

Table 1-587 Basic information about the CR2D000IE111
Item Details
Description 32-Port E1 Physical Interface Card(120ohm)
Part Number 03030QCP
Model CR2D000IE111
Card type Interface Card
Silkscreen 32xE1-120

Appearance

Figure 1-128 Appearance of the CR2D000IE111

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03030QCP&productModel=CR2D000IE111#matchRelation

Indicators

Table 1-588 Indicators on the CR2D000IE111
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the PIC is faulty.
Yellow Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.

Ports

Table 1-589 Ports on the CR2D000IE111
Port Connector Type Description Available Components
E1(0-15) E1(16-31) Anea 96 32 E1 interfaces

120-Ohm 16 x E1 Cables
Table 1-590 Port attributes about the CR2D000IE111
Attributes Details
Working mode Full-duplex
Standards compliance IMA 1.1, RFC4717, RFC4385, RFC4816, RFC5086, RFC4553_SATOP, and RFC1662
Frame format Non-framed, CRC4 and NO-CRC4
Interface code HDB3
Stated bit rate 2048 kbit/s

Functions and Features

Table 1-591 Functions and features of the CR2D000IE111
Functions and Features Description
Basic function Supports a maximum of 32 E1 interfaces. Services on each interface can be configured.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No
Link protocol TDM, PPP, MP, ATM, IMA

Technical Specifications

Table 1-592 Technical specifications of the CR2D000IE111
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.5 kg (1.1 lb)
Weight with packaging [kg(lb)] 0.9 kg (1.98 lb)
Typical power consumption [W] 13.5 W
Typical heat dissipation [BTU/hour] 43.8 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR2D000SA890 (8-Channel V.35/X.21/V.24 Board)

Overview

Table 1-593 Basic information about the CR2D000SA890
Item Details
Description 8-Channel V.35/X.21/V.24 Board
Part Number 03032TGR
Model CR2D000SA890
Card type Interface Card
Silkscreen SA8
Remarks -

Appearance

Figure 1-129 Appearance of the CR2D000SA890

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03032TGR&productModel=CR2D000SA890#matchRelation

Indicators

Table 1-594 Indicators on the CR2D000SA890
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The PIC is working properly.
Red Steady on The hardware on the PIC is faulty.
Yellow Steady on The PIC is installed in a slot for a HIC and an alarm is reported or the PIC is not loaded with the logic.
- Off The PIC is powered off or is not registered.
L/A(0 to 7) Running status indicator Green Steady on The link is normal
Green Blinking Data is being transmitted.
- Off The link is Down.

Ports

Table 1-595 Ports on the CR2D000SA890
Port Connector Type Description Available Components
0 to 7 DB28 serial interface 8-channel V.35/X.21/V.24 interface

V.35 DTE, DCE cable /X.21 DTE, DCE cable /V.24 DTE, DCE cable
Table 1-596 Port attributes about the CR2D000SA890
Attributes Details
Working mode Full-duplex
Frame format PWE3

Functions and Features

Table 1-597 Functions and features of the CR2D000SA890
Functions and Features Description
Basic function Supports 8-channel V.35/X.21/V.24 interface features.
Reliability and availability Hot swappable.
Restrictions and remarks Not applicable to outdoor scenarios.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-598 Technical specifications of the CR2D000SA890
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.6 kg (1.32 lb)
Weight with packaging [kg(lb)] 1.0 kg (2.2 lb)
Typical power consumption [W] 18 W
Typical heat dissipation [BTU/hour] 58.40 BTU/hour
Long-term operating temperature [°C(°F)] 0°C to 45°C (32°F to 113°F)
Short-term operating temperature [°C(°F)] –5°C to +55°C (23°F to 131°F)

CR2D00E8GE12 (8-Port 100/1000Base-RJ45 Physical Interface Card)

Overview

Table 1-599 Basic information about the CR2D00E8GE12
Item Details
Description 8-Port 100/1000Base-RJ45 Physical Interface Card
Part Number 03031DHB
Model CR2D00E8GE12
Card type Interface Card
Silkscreen 8xFE/GE-RJ

Appearance

Figure 1-130 Appearance of the CR2D00E8GE12

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03031DHB&productModel=CR2D00E8GE12#matchRelation

Indicators

Table 1-600 Indicators on the CR2D00E8GE12
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the PIC is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
LINK Connection status indicator Green Steady on

The LINK is located above each FE/GE electrical port.

The data interface is transmitting or receiving data.
- Off The physical port connection fails.
ACT Transmitting/receiving status indicator Orange Blinking

The ACT is located above each FE/GE electrical port.

The data interface is not transmitting or receiving data.
- Off The data interface is not transmitting or receiving data.

Ports

Table 1-601 Ports on the CR2D00E8GE12
Port Connector Type Description Available Components
FE/GE0-FE/GE7 RJ45 GE/FE service signal input and output interface

Ethernet Cables
Table 1-602 Port attributes about the CR2D00E8GE12
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-603 Functions and features of the CR2D00E8GE12
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides eight GE/FE interfaces for line-rate transmitting and receiving, and supports 10M/100M/1000M electrical interfaces.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-604 Technical specifications of the CR2D00E8GE12
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.5 kg (1.1 lb)
Weight with packaging [kg(lb)] 0.9 kg (1.98 lb)
Typical power consumption [W] 11.7 W
Typical heat dissipation [BTU/hour] 37.96 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR2D00EAGF10 (10-Port 100/1000Base-X-SFP Physical Interface Card)

Overview

Table 1-605 Basic information about the CR2D00EAGF10
Item Details
Description 10-Port 100/1000Base-X-SFP Physical Interface Card
Part Number 03031DJK
Model CR2D00EAGF10
Card type Interface Card
Silkscreen 10xFE/GE-SFP

Appearance

Figure 1-131 Appearance of the CR2D00EAGF10

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03031DJK&productModel=CR2D00EAGF10#matchRelation

Indicators

Table 1-606 Indicators on the CR2D00EAGF10
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the PIC is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
L/A (0 to 9) Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted or received.
- Off The link is Down.

Ports

Table 1-607 Ports on the CR2D00EAGF10
Port Connector Type Description Available Components
OUT0 IN0-OUT9 IN9 SFP GE/FE service signal input and output interface

155Mbps SFP Electrical Module

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1Gbps Electrical Module

1.25Gbps eSFP Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP BIDI Optical Module

125M~2.67Gbps eSFP DWDM Optical Module
Table 1-608 Port attributes about the CR2D00EAGF10
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-609 Functions and features of the CR2D00EAGF10
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides ten GE/FE interfaces for line-rate transmitting and receiving, and supports SFP optical modules.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-610 Technical specifications of the CR2D00EAGF10
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.6 kg (1.32 lb)
Weight with packaging [kg(lb)] 1.0 kg (2.2 lb)
Typical power consumption [W] 13.3 W
Typical heat dissipation [BTU/hour] 43.15 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR2D00L4XF11 (4-Port 10GBase LAN/WAN-SFP+ Physical Interface Card)

Overview

Table 1-611 Basic information about the CR2D00L4XF11
Item Details
Description 4-Port 10GBase LAN/WAN-SFP+ Physical Interface Card
Part Number 03031DJP
Model CR2D00L4XF11
Card type Interface Card
Silkscreen 4×10GE-SFP+

Appearance

Figure 1-132 Appearance of the CR2D00L4XF11

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03031DJP&productModel=CR2D00L4XF11#matchRelation

Indicators

Table 1-612 Indicators on the CR2D00L4XF11
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the PIC is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
L/A (0 to 3) Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted or received.
- Off The link is Down.

Ports

Table 1-613 Ports on the CR2D00L4XF11
Port Connector Type Description Available Components
OUT0 IN0-OUT3 IN3 SFP+ 10 GE service signal input and output interface

10Gbps SFP+ Optical Module

10Gbps SFP+ BIDI Optical Module

10Gbps SFP+ CWDM Optical Module

1.25/9.953/10.3125Gbps SFP+ Optical Module

1.25Gbps eSFP BIDI Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP Optical Module

125M~2.67Gbps eSFP DWDM Optical Module

1Gbps Electrical Module

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module
Table 1-614 Port attributes about the CR2D00L4XF11
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-615 Functions and features of the CR2D00L4XF11
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides four 10GE interfaces for line-rate transmitting and receiving, and supports SFP+ optical modules.
Reliability and availability Hot swappable.
Restrictions and remarks The board does not support the OTN mode or FEC function. If a colored optical module is used and does not support optical amplifier insertion, the board supports only point-to-point optical transmission.
Breakout supported No
Interface rate auto-sensing supported Supports GE/10GE auto-sensing.
FlexE supported No

Technical Specifications

Table 1-616 Technical specifications of the CR2D00L4XF11
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.7 kg (1.54 lb)
Weight with packaging [kg(lb)] 1.1 kg (2.43 lb)
Typical power consumption [W] 25 W
Typical heat dissipation [BTU/hour] 81.11 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR2D00MP8A90 (4 Channels C37.94 Optical Interface and 4 Channels CoDir64K Electric Interface Board)

Overview

Table 1-617 Basic information about the CR2D00MP8A90
Item Details
Description 4 Channels C37.94 Optical Interface and 4 Channels CoDir64K Electric Interface Board
Part Number 03032TGS
Model CR2D00MP8A90
Card type Interface Card
Silkscreen MP8A

Appearance

Figure 1-133 Appearance of the CR2D00MP8A90

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03032TGS&productModel=CR2D00MP8A90#matchRelation

Indicators

Table 1-618 Indicators on the CR2D00MP8A90
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The PIC is working properly.
Red Steady on The hardware on the PIC is faulty.
Yellow Steady on The PIC is installed in a slot for a HIC and an alarm is reported or the PIC is not loaded with the logic.
- Off The PIC is powered off or is not registered.
LOS(0 to 3) Optical Interface LOS Indicator Green Steady on The optical signal is normal.
Red Steady on Signals on an optical port are lost.
Orange Steady on A LOS alarm is generated on the port.
- Off The optical module cannot be detected.
LINK (Codir) Connection/data transmission status indicator green Steady on The data interface is transmitting or receiving data.
- Off The physical port connection fails.
LOS (Codir) orange Steady on LOS alarms are generated on the port.
- Off The device is not powered on or has not been initialized.

Ports

Table 1-619 Ports on the CR2D00MP8A90
Port Connector Type Description Available Components
OUT0 IN0 to OUT3 IN3 SFP 4-channel C37.94 optical port

2.048Mbps SFP Optical Module
4 to 7 RJ45 4-channel CoDir64K electrical port

Codirectional 64K shielded cable
Table 1-620 Port attributes about the CR2D00MP8A90
Attributes Details
Working mode Full-duplex
Standards compliance ITU-T G.703(codirectional 64K)
Frame format PWE3
Stated bit rate 2048 kbit/s(C37.94)
Center wavelength [nm] 1310 nm

Functions and Features

Table 1-621 Functions and features of the CR2D00MP8A90
Functions and Features Description
Basic function Supports 4-channel C37.94 optical port and 4-channel CoDir64K electrical interface features.
Reliability and availability Hot swappable.
Restrictions and remarks Not applicable to outdoor scenarios.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-622 Technical specifications of the CR2D00MP8A90
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.5 kg (1.1 lb)
Weight with packaging [kg(lb)] 0.9 kg (1.98 lb)
Typical power consumption [W] 6 W
Typical heat dissipation [BTU/hour] 19.47 BTU/hour
Long-term operating temperature [°C(°F)] 0°C to 45°C (32°F to 113°F)
Short-term operating temperature [°C(°F)] –5°C to +55°C (23°F to 131°F)

CR2D00MPAA90 (4-Channel FXS/FXO+2-Channel E&M+2-Channel RS232+2-Channel RS485 Board)

Overview

Table 1-623 Basic information about the CR2D00MPAA90
Item Details
Description 4-Channel FXS/FXO+2-Channel E&M+2-Channel RS232+2-Channel RS485 Board
Part Number 03032TGP
Model CR2D00MPAA90
Card type Interface Card
Silkscreen MPAA
Remarks -

Appearance

Figure 1-134 Appearance of the CR2D00MPAA90

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03032TGP&productModel=CR2D00MPAA90#matchRelation

Indicators

Table 1-624 Indicators on the CR2D00MPAA90
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The PIC is working properly.
Red Steady on The hardware on the PIC is faulty.
Yellow Steady on The PIC is installed in a slot for a HIC and an alarm is reported or the PIC is not loaded with the logic.
- Off The PIC is powered off or is not registered.

Ports

Table 1-625 Ports on the CR2D00MPAA90
Port Connector Type Description Available Components
RS232 0/2 RJ45 2-channel RS232

Serial interface cable
RS485 1/3 RJ45 2-channel RS485/RS422 interface

RS-485 /RS-422 cables
EM 4/5 RJ45 2-channel E&M

E&M cable
FXSO 6 to 9 Telephone interface 4-channel FXS/FXO

Telephone line
Table 1-626 Port attributes about the CR2D00MPAA90
Attributes Details
Working mode Full-duplex
Frame format PWE3

Functions and Features

Table 1-627 Functions and features of the CR2D00MPAA90
Functions and Features Description
Basic function Supports 2-channel RS232, 2-channel RS485&RS422, 2-channel E&M, and 4-channel FXS/FXO interface features.
Reliability and availability Hot swappable.
Restrictions and remarks Not applicable to outdoor scenarios.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-628 Technical specifications of the CR2D00MPAA90
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.6 kg (1.32 lb)
Weight with packaging [kg(lb)] 1.0 kg (2.2 lb)
Typical power consumption [W] 12 W
Typical heat dissipation [BTU/hour] 38.93 BTU/hour
Long-term operating temperature [°C(°F)] 0°C to 45°C (32°F to 113°F)
Short-term operating temperature [°C(°F)] –5°C to +55°C (23°F to 131°F)

CR5D000DE170 (16-Port E1 Physical Interface Card(PIC,75ohm))

Overview

Table 1-629 Basic information about the CR5D000DE170
Item Details
Description 16-Port E1 Physical Interface Card(PIC,75ohm)
Part Number 03030REX
Model CR5D000DE170
Card type Interface Card
Silkscreen 16xE1-75

Appearance

Figure 1-135 Appearance of the CR5D000DE170

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03030REX&productModel=CR5D000DE170#matchRelation

Indicators

Table 1-630 Indicators on the CR5D000DE170
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Yellow Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.

Ports

Table 1-631 Ports on the CR5D000DE170
Port Connector Type Description Available Components
E1(0-15) Anea 96 16 E1 interfaces

75-Ohm 16 x E1 Cables
Table 1-632 Port attributes about the CR5D000DE170
Attributes Details
Working mode Full-duplex
Standards compliance IMA 1.1, RFC4717, RFC4385, RFC4816, RFC5086, RFC4553_SATOP, and RFC1662
Frame format Non-framed, CRC4 and NO-CRC4
Interface code HDB3
Stated bit rate 2048 kbit/s

Functions and Features

Table 1-633 Functions and features of the CR5D000DE170
Functions and Features Description
Basic function Supports a maximum of 16 E1 interfaces. Services on each interface can be configured.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No
Link protocol TDM, PPP, MP, ATM, IMA

Technical Specifications

Table 1-634 Technical specifications of the CR5D000DE170
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.5 kg (1.1 lb)
Weight with packaging [kg(lb)] 0.9 kg (1.98 lb)
Typical power consumption [W] 9.5 W
Typical heat dissipation [BTU/hour] 30.66 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR5D000DE171 (16-Port E1 Physical Interface Card(PIC,120ohm))

Overview

Table 1-635 Basic information about the CR5D000DE171
Item Details
Description 16-Port E1 Physical Interface Card(PIC,120ohm)
Part Number 03030REW
Model CR5D000DE171
Card type Interface Card
Silkscreen 16xE1-120

Appearance

Figure 1-136 Appearance of the CR5D000DE171

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03030REW&productModel=CR5D000DE171#matchRelation

Indicators

Table 1-636 Indicators on the CR5D000DE171
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Yellow Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.

Ports

Table 1-637 Ports on the CR5D000DE171
Port Connector Type Description Available Components
E1(0-15) Anea 96 16 E1 interfaces

120-Ohm 16 x E1 Cables
Table 1-638 Port attributes about the CR5D000DE171
Attributes Details
Working mode Full-duplex
Standards compliance IMA 1.1, RFC4717, RFC4385, RFC4816, RFC5086, RFC4553_SATOP, and RFC1662
Frame format Non-framed, CRC4 and NO-CRC4
Interface code HDB3
Stated bit rate 2048 kbit/s

Functions and Features

Table 1-639 Functions and features of the CR5D000DE171
Functions and Features Description
Basic function Supports a maximum of 16 E1 interfaces. Services on each interface can be configured.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No
Link protocol TDM, PPP, MP, ATM, IMA

Technical Specifications

Table 1-640 Technical specifications of the CR5D000DE171
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.5 kg (1.1 lb)
Weight with packaging [kg(lb)] 0.9 kg (1.98 lb)
Typical power consumption [W] 9.5 W
Typical heat dissipation [BTU/hour] 30.66 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR5D000DE1C1 (16-Port E1 Physical Interface Card(PIC,75ohm/120ohm))

Overview

Table 1-641 Basic information about the CR5D000DE1C1
Item Details
Description 16-Port E1 Physical Interface Card(PIC,75ohm/120ohm)
Part Number 03033GGD
Model CR5D000DE1C1
Card type Interface Card
Silkscreen 16xE1-75/120

Appearance

Figure 1-137 Appearance of the CR5D000DE1C1

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033GGD&productModel=CR5D000DE1C1#matchRelation

Indicators

Table 1-642 Indicators on the CR5D000DE1C1
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on If the indicator is steady on, the PIC is working properly.
Red Steady on If the indicator is steady on, the hardware on the PIC is faulty.
Orange Steady on If the indicator is steady on, the PIC is installed in a slot for a HIC and an alarm is reported or the PIC is not loaded with the logic.
- Off If the indicator is off, the PIC is powered off or is not registered.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarms.
- Off The board is not running or no power is input.

Ports

Table 1-643 Ports on the CR5D000DE1C1
Port Connector Type Description Available Components
E1(0-15) ANEA 96 16 E1 interfaces

75/120 ohm 16xE1 cable
Table 1-644 Port attributes about the CR5D000DE1C1
Attributes Details
Working mode Full-duplex
Standards compliance IMA 1.1, RFC4385, RFC5086, RFC4553_SATOP, RFC1662
Frame format Unframed mode, CRC4, and NO-CRC4

Functions and Features

Table 1-645 Functions and features of the CR5D000DE1C1
Functions and Features Description
Basic function Supports a maximum of 16 E1 interfaces. Services on each interface can be configured.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No
Link protocol TDM, PPP, MP, ATM, IMA

Technical Specifications

Table 1-646 Technical specifications of the CR5D000DE1C1
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.6 kg (1.32 lb)
Weight with packaging [kg(lb)] 1.0 kg (2.2 lb)
Typical power consumption [W] 15.1 W
Typical heat dissipation [BTU/hour] 48.86 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR5D000IE170 (32-Port E1 Physical Interface Card(PIC,75ohm))

Overview

Table 1-647 Basic information about the CR5D000IE170
Item Details
Description 32-Port E1 Physical Interface Card(PIC,75ohm)
Part Number 03030QBN
Model CR5D000IE170
Card type Interface Card
Silkscreen 32xE1-75

Appearance

Figure 1-138 Appearance of the CR5D000IE170

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03030QBN&productModel=CR5D000IE170#matchRelation

Indicators

Table 1-648 Indicators on the CR5D000IE170
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Yellow Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.

Ports

Table 1-649 Ports on the CR5D000IE170
Port Connector Type Description Available Components
E1(0-15) E1(16-31) Anea 96 32 E1 interfaces

75-Ohm 16 x E1 Cables
Table 1-650 Port attributes about the CR5D000IE170
Attributes Details
Working mode Full-duplex
Standards compliance IMA 1.1, RFC4717, RFC4385, RFC4816, RFC5086, RFC4553_SATOP, and RFC1662
Frame format Non-framed, CRC4 and NO-CRC4
Interface code HDB3
Stated bit rate 2048 kbit/s

Functions and Features

Table 1-651 Functions and features of the CR5D000IE170
Functions and Features Description
Basic function Supports a maximum of 32 E1 interfaces. Services on each interface can be configured.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No
Link protocol TDM, PPP, MP, ATM, IMA

Technical Specifications

Table 1-652 Technical specifications of the CR5D000IE170
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.5 kg (1.1 lb)
Weight with packaging [kg(lb)] 0.9 kg (1.98 lb)
Typical power consumption [W] 13.5 W
Typical heat dissipation [BTU/hour] 43.8 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR5D000IE171 (32-Port E1 Physical Interface Card(PIC,120ohm))

Overview

Table 1-653 Basic information about the CR5D000IE171
Item Details
Description 32-Port E1 Physical Interface Card(PIC,120ohm)
Part Number 03030QBP
Model CR5D000IE171
Card type Interface Card
Silkscreen 32xE1-120

Appearance

Figure 1-139 Appearance of the CR5D000IE171

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03030QBP&productModel=CR5D000IE171#matchRelation

Indicators

Table 1-654 Indicators on the CR5D000IE171
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Yellow Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.

Ports

Table 1-655 Ports on the CR5D000IE171
Port Connector Type Description Available Components
E1(0-15) E1(16-31) Anea 96 32 E1 interfaces

120-Ohm 16 x E1 Cables
Table 1-656 Port attributes about the CR5D000IE171
Attributes Details
Working mode Full-duplex
Standards compliance IMA 1.1, RFC4717, RFC4385, RFC4816, RFC5086, RFC4553_SATOP, and RFC1662
Frame format Non-framed, CRC4 and NO-CRC4
Interface code HDB3
Stated bit rate 2048 kbit/s

Functions and Features

Table 1-657 Functions and features of the CR5D000IE171
Functions and Features Description
Basic function Supports a maximum of 32 E1 interfaces. Services on each interface can be configured.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No
Link protocol TDM, PPP, MP, ATM, IMA

Technical Specifications

Table 1-658 Technical specifications of the CR5D000IE171
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.5 kg (1.1 lb)
Weight with packaging [kg(lb)] 0.9 kg (1.98 lb)
Typical power consumption [W] 13.5 W
Typical heat dissipation [BTU/hour] 43.8 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR5D00C4CFC1 (4-Port Channelized STM-1c POS-SFP Physical Interface Card(PIC))

Overview

Table 1-659 Basic information about the CR5D00C4CFC1
Item Details
Description 4-Port Channelized STM-1c POS-SFP Physical Interface Card(PIC)
Part Number 03033GGF
Model CR5D00C4CFC1
Card type Interface Card
Silkscreen 4xSTM1-cPOS

Appearance

Figure 1-140 Appearance of the CR5D00C4CFC1

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033GGF&productModel=CR5D00C4CFC1#matchRelation

Indicators

Table 1-660 Indicators on the CR5D00C4CFC1
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working normally.
Red Steady on The board hardware is faulty.
Orange Steady on The board is not loaded with the logic.
- Off The board is not running or no power is input.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarms.
- Off The board is not running or no power is input.
LOS(0 to 3) Connection/data transmission status indicator Green Steady on The connection on the physical port is normal.
Green Blink The connection on the physical port is normal, and data is received or transmitted on the port.
- Off The physical connection fails.

Ports

Table 1-661 Ports on the CR5D00C4CFC1
Port Connector Type Description Available Components
OUT0 IN0 to OUT3 IN3 SFP STM-1 service signal input and output interface

155Mbps SFP Electrical Module

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module
Table 1-662 Port attributes about the CR5D00C4CFC1
Attributes Details
Working mode Full-duplex
Standards compliance IMA 1.1, RFC4385, RFC5086, RFC4553_SATOP, RFC1662
Frame format 155M interfaces support SDH. Channelized E1 interfaces support the framed mode (channelized mode), unframed mode (clear channel mode), CRC4, and NO-CRC4.

Functions and Features

Table 1-663 Functions and features of the CR5D00C4CFC1
Functions and Features Description
Basic function Supports 63 E1 links over four 155M SDH links.
Reliability and availability Hot swappable.
Restrictions and remarks Ports 0 to 3 support clock master mode.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No
Link protocol TDM, PPP, MP, ATM, IMA

Technical Specifications

Table 1-664 Technical specifications of the CR5D00C4CFC1
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.5 kg (1.1 lb)
Weight with packaging [kg(lb)] 0.9 kg (1.98 lb)
Typical power consumption [W] 16.8 W
Typical heat dissipation [BTU/hour] 54.5 BTU/hour
Long-term operating temperature [°C(°F)] –20°C to +65°C (–4°F to +149°F)

CR5D00E1NC97 (03033HAF: 1-Port 100GE/ 1-Port 200GE CFP2 Physical Interface Card(PIC) (Enable 1*100GE by default))

Overview

Table 1-665 Basic information about the CR5D00E1NC97
Item Details
Description 1-Port 100GE/ 1-Port 200GE CFP2 Physical Interface Card(PIC) (Enable 1*100GE by default)
Part Number 03033HAF
Model CR5D00E1NC97
Card type Interface Card
Silkscreen 1x100/200GE-CFP2

Appearance

Figure 1-141 Appearance of the CR5D00E1NC97

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033HAF&productModel=CR5D00E1NC97#matchRelation

Indicators

Table 1-666 Indicators on the CR5D00E1NC97
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on If the indicator is steady on, the PIC is working properly.
Red Steady on If the indicator is steady on, the hardware on the PIC is faulty.
Orange Steady on If the indicator is steady on, the PIC is installed in a slot for a HIC and an alarm is reported or the PIC is not loaded with the logic.
- Off If the indicator is off, the PIC is powered off or is not registered.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarms.
- Off The board is not running or no power is input.
L/A 0 Running status indicator Green Steady on The link is Up.
Green Blink If the indicator blinks, data is being transmitted.
- Off If the indicator is off, the link is Down.

Ports

Table 1-667 Ports on the CR5D00E1NC97
Port Connector Type Description Available Components
OUT0 IN0 CFP2 Interfaces for 1-channel CFP2 optical signal input and output

100Gbps CFP2 Optical Module

100Gbps CFP2 DWDM Optical Module
Table 1-668 Port attributes about the CR5D00E1NC97
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, and Ethernet_SNAP

Functions and Features

Table 1-669 Functions and features of the CR5D00E1NC97
Functions and Features Description
Basic function

Provides one 100GEBase CFP2 interface. The 200GE interface capability is reserved on the hardware.

MACsec is supported.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-670 Technical specifications of the CR5D00E1NC97
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.2 kg (2.65 lb)
Typical power consumption [W] 43.2 W
Typical heat dissipation [BTU/hour] 140.16 BTU/hour
Long-term operating temperature [°C(°F)] –5°C to +50°C (23°F to 122°F)

CR5D00E1NC97 (03033HAF-001: 1-Port 100GE/ 1-Port 200GE CFP2 Physical Interface Card(PIC) (Enable 1*100GE by default))

Overview

Table 1-671 Basic information about the CR5D00E1NC97
Item Details
Description 1-Port 100GE/ 1-Port 200GE CFP2 Physical Interface Card(PIC) (Enable 1*100GE by default)
Part Number 03033HAF-001
Model CR5D00E1NC97
Card type Interface Card
Silkscreen 1x100/200GE-CFP2

Appearance

Figure 1-142 Appearance of the CR5D00E1NC97

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033HAF-001&productModel=CR5D00E1NC97#matchRelation

Indicators

Table 1-672 Indicators on the CR5D00E1NC97
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on If the indicator is steady on, the PIC is working properly.
Red Steady on If the indicator is steady on, the hardware on the PIC is faulty.
Orange Steady on If the indicator is steady on, the PIC is installed in a slot for a HIC and an alarm is reported or the PIC is not loaded with the logic.
- Off If the indicator is off, the PIC is powered off or is not registered.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarms.
- Off The board is not running or no power is input.
L/A 0 Running status indicator Green Steady on The link is Up.
Green Blink If the indicator blinks, data is being transmitted.
- Off If the indicator is off, the link is Down.

Ports

Table 1-673 Ports on the CR5D00E1NC97
Port Connector Type Description Available Components
OUT0 IN0 CFP2 Interfaces for 1-channel CFP2 optical signal input and output

100Gbps CFP2 Optical Module

100Gbps CFP2 DWDM Optical Module
Table 1-674 Port attributes about the CR5D00E1NC97
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, and Ethernet_SNAP

Functions and Features

Table 1-675 Functions and features of the CR5D00E1NC97
Functions and Features Description
Basic function

Provides one 100GEBase CFP2 interface. The 200GE interface capability is reserved on the hardware.

MACsec is supported.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-676 Technical specifications of the CR5D00E1NC97
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.2 kg (2.65 lb)
Typical power consumption [W] 43.2 W
Typical heat dissipation [BTU/hour] 140.16 BTU/hour
Long-term operating temperature [°C(°F)] –5°C to +50°C (23°F to 122°F)

CR5D00E4XM25 (03033BLK: 4-Port 25GE(SFP28)/10GE(SFP+) MACsec Physical Interface Card (PIC))

Overview

Table 1-677 Basic information about the CR5D00E4XM25
Item Details
Description 4-Port 25GE(SFP28)/10GE(SFP+) MACsec Physical Interface Card (PIC)
Part Number 03033BLK
Model CR5D00E4XM25
Card type Interface Card
Silkscreen 4x25GE-SFP28

Appearance

Figure 1-143 Appearance of the CR5D00E4XM25

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033BLK&productModel=CR5D00E4XM25#matchRelation

Indicators

Table 1-678 Indicators on the CR5D00E4XM25
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
SRV Service Status Indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarm.
- Off The board is not running or no power is input.
L/A (0–3) Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted or received.
- Off The link is Down.

Ports

Table 1-679 Ports on the CR5D00E4XM25
Port Connector Type Description Available Components
OUT0 IN0-OUT3 IN3 SFP28 25GE/10GE service signal input and output interface

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1.25/9.953/10.3125Gbps SFP+ Optical Module

1.25Gbps eSFP BIDI Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP Optical Module

10Gbps SFP+ BIDI Optical Module

10Gbps SFP+ CWDM Optical Module

10Gbps SFP+ Optical Module

125M~2.67Gbps eSFP DWDM Optical Module

1Gbps SyncE and 1588V2 Electrical Module

1Gbps Electrical Module

25Gbps SFP28 Optical Module

25Gbps SFP28 BIDI Optical Module
Table 1-680 Port attributes about the CR5D00E4XM25
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-681 Functions and features of the CR5D00E4XM25
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides four 25GE/10GE interfaces for line-rate transmitting and receiving, and supports SFP28/SFP+ optical modules.

MACsec is supported.
Reliability and availability Hot swappable.
Restrictions and remarks By default, 25GE/10GE auto-negotiation is supported. You can run the port-mode group-id command in the slot view to switch the mode to 10GE/GE auto-negotiation.
Breakout supported No
Interface rate auto-sensing supported In 25GE mode, 10GE/25GE auto-sensing supported; In 10GE mode, GE/10GE auto-sensing supported.
FlexE supported No

Technical Specifications

Table 1-682 Technical specifications of the CR5D00E4XM25
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.7 kg (1.54 lb)
Weight with packaging [kg(lb)] 1.1 kg (2.43 lb)
Typical power consumption [W] 25.3 W
Typical heat dissipation [BTU/hour] 82.15 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR5D00E4XM25 (03033BLK-001: 4-Port 25GE(SFP28)/10GE(SFP+) MACsec Physical Interface Card (PIC))

Overview

Table 1-683 Basic information about the CR5D00E4XM25
Item Details
Description 4-Port 25GE(SFP28)/10GE(SFP+) MACsec Physical Interface Card (PIC)
Part Number 03033BLK-001
Model CR5D00E4XM25
Card type Interface Card
Silkscreen 4x25GE-SFP28

Appearance

Figure 1-144 Appearance of the CR5D00E4XM25

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033BLK-001&productModel=CR5D00E4XM25#matchRelation

Indicators

Table 1-684 Indicators on the CR5D00E4XM25
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
SRV Service Status Indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarm.
- Off The board is not running or no power is input.
L/A (0–3) Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted or received.
- Off The link is Down.

Ports

Table 1-685 Ports on the CR5D00E4XM25
Port Connector Type Description Available Components
OUT0 IN0-OUT3 IN3 SFP28 25GE/10GE service signal input and output interface

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1.25/9.953/10.3125Gbps SFP+ Optical Module

1.25Gbps eSFP BIDI Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP Optical Module

10Gbps SFP+ BIDI Optical Module

10Gbps SFP+ CWDM Optical Module

10Gbps SFP+ Optical Module

125M~2.67Gbps eSFP DWDM Optical Module

1Gbps SyncE and 1588V2 Electrical Module

1Gbps Electrical Module

25Gbps SFP28 Optical Module

25Gbps SFP28 BIDI Optical Module
Table 1-686 Port attributes about the CR5D00E4XM25
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-687 Functions and features of the CR5D00E4XM25
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides four 25GE/10GE interfaces for line-rate transmitting and receiving, and supports SFP28/SFP+ optical modules.

MACsec is supported.
Reliability and availability Hot swappable.
Restrictions and remarks By default, 25GE/10GE auto-negotiation is supported. You can run the port-mode group-id command in the slot view to switch the mode to 10GE/GE auto-negotiation.
Breakout supported No
Interface rate auto-sensing supported In 25GE mode, 10GE/25GE auto-sensing supported; In 10GE mode, GE/10GE auto-sensing supported.
FlexE supported No

Technical Specifications

Table 1-688 Technical specifications of the CR5D00E4XM25
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.7 kg (1.54 lb)
Weight with packaging [kg(lb)] 1.1 kg (2.43 lb)
Typical power consumption [W] 25.3 W
Typical heat dissipation [BTU/hour] 82.15 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR5D00E8GE71 (8-Port 100/1000Base-RJ45 Physical Interface Card(PIC))

Overview

Table 1-689 Basic information about the CR5D00E8GE71
Item Details
Description 8-Port 100/1000Base-RJ45 Physical Interface Card(PIC)
Part Number 03031DGY
Model CR5D00E8GE71
Card type Interface Card
Silkscreen 8xFE/GE-RJ

Appearance

Figure 1-145 Appearance of the CR5D00E8GE71

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03031DGY&productModel=CR5D00E8GE71#matchRelation

Indicators

Table 1-690 Indicators on the CR5D00E8GE71
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
LINK Connection status indicator Green Steady on The physical connection of the port is normal.
- Off The physical port connection fails.
ACT Transmitting/receiving status indicator Orange Blinking The data interface is not transmitting or receiving data.
- Off The data interface is not transmitting or receiving data.

Ports

Table 1-691 Ports on the CR5D00E8GE71
Port Connector Type Description Available Components
FE/GE0-FE/GE7 RJ45 GE/FE service signal input and output interface

Ethernet Cables
Table 1-692 Port attributes about the CR5D00E8GE71
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-693 Functions and features of the CR5D00E8GE71
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides eight GE/FE interfaces for line-rate transmitting and receiving, and supports 10M/100M/1000M electrical interfaces.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-694 Technical specifications of the CR5D00E8GE71
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.5 kg (1.1 lb)
Weight with packaging [kg(lb)] 0.9 kg (1.98 lb)
Typical power consumption [W] 11.7 W
Typical heat dissipation [BTU/hour] 37.96 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR5D00E8XM25 (03033BLM: 8-Port 25GE(SFP28)/10GE(SFP+) MACsec Physical Interface Card (PIC))

Overview

Table 1-695 Basic information about the CR5D00E8XM25
Item Details
Description 8-Port 25GE(SFP28)/10GE(SFP+) MACsec Physical Interface Card (PIC)
Part Number 03033BLM
Model CR5D00E8XM25
Card type Interface Card
Silkscreen 8x25GE-SFP28

Appearance

Figure 1-146 Appearance of the CR5D00E8XM25

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033BLM&productModel=CR5D00E8XM25#matchRelation

Indicators

Table 1-696 Indicators on the CR5D00E8XM25
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The card is working properly.
Red Steady on If the indicator is steady on, the hardware on the PIC is faulty.
Orange Steady on If the indicator is steady on, the PIC is installed in a slot for a HIC and an alarm is reported or the PIC is not loaded with the logic.
- Off If the indicator is off, the PIC is powered off or is not registered.
SRV Service status indicator Green Steady on the board has no CRC alarm.
Orange Steady on the board has CRC alarms.
- Off the board is not running or no power is input.
L/A (0–7) Running status indicator Green Steady on The link is up.
Green Blinking Data is being transmitted or received.
- Off The link is down.

Ports

Table 1-697 Ports on the CR5D00E8XM25
Port Connector Type Description Available Components
OUT0 IN0 to OUT7 IN7 SFP28 25GE/10GE service signal input and output interface

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1.25/9.953/10.3125Gbps SFP+ Optical Module

1.25Gbps eSFP BIDI Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP Optical Module

10Gbps SFP+ BIDI Optical Module

10Gbps SFP+ CWDM Optical Module

10Gbps SFP+ Optical Module

125M~2.67Gbps eSFP DWDM Optical Module

1Gbps Electrical Module

25Gbps SFP28 Optical Module
Table 1-698 Port attributes about the CR5D00E8XM25
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, and Ethernet_SNAP

Functions and Features

Table 1-699 Functions and features of the CR5D00E8XM25
Functions and Features Description
Basic function

Supports optical signal input and output of eight 25GE/10GE ports.

Supports MACSEC.
Reliability and availability Supports the hot swappable function.
Restrictions and remarks Ports 0 to 3 belong to a port group, and ports 4 to 7 belong to another one. By default, 25GE/10GE auto-negotiation is supported. You can run the port-mode group-id command in the slot view to switch the mode of a port group to 10GE/GE auto-negotiation. In LAN/WAN switching, the mode of ports in a port group must be switched at the same time.
Breakout supported No
Interface rate auto-sensing supported In 25GE mode, 10GE/25GE auto-sensing supported; In 10GE mode, GE/10GE auto-sensing supported.
FlexE supported No

Technical Specifications

Table 1-700 Technical specifications of the CR5D00E8XM25
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.2 kg (2.65 lb)
Typical power consumption [W] 37.5 W
Typical heat dissipation [BTU/hour] 121.57 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR5D00E8XM25 (03033BLM-001: 8-Port 25GE(SFP28)/10GE(SFP+) MACsec Physical Interface Card (PIC))

Overview

Table 1-701 Basic information about the CR5D00E8XM25
Item Details
Description 8-Port 25GE(SFP28)/10GE(SFP+) MACsec Physical Interface Card (PIC)
Part Number 03033BLM-001
Model CR5D00E8XM25
Card type Interface Card
Silkscreen 8x25GE-SFP28

Appearance

Figure 1-147 Appearance of the CR5D00E8XM25

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033BLM-001&productModel=CR5D00E8XM25#matchRelation

Indicators

Table 1-702 Indicators on the CR5D00E8XM25
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The card is working properly.
Red Steady on If the indicator is steady on, the hardware on the PIC is faulty.
Orange Steady on If the indicator is steady on, the PIC is installed in a slot for a HIC and an alarm is reported or the PIC is not loaded with the logic.
- Off If the indicator is off, the PIC is powered off or is not registered.
SRV Service status indicator Green Steady on the board has no CRC alarm.
Orange Steady on the board has CRC alarms.
- Off the board is not running or no power is input.
L/A (0–7) Running status indicator Green Steady on The link is up.
Green Blinking Data is being transmitted or received.
- Off The link is down.

Ports

Table 1-703 Ports on the CR5D00E8XM25
Port Connector Type Description Available Components
OUT0 IN0 to OUT7 IN7 SFP28 25GE/10GE service signal input and output interface

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1.25/9.953/10.3125Gbps SFP+ Optical Module

1.25Gbps eSFP BIDI Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP Optical Module

10Gbps SFP+ BIDI Optical Module

10Gbps SFP+ CWDM Optical Module

10Gbps SFP+ Optical Module

125M~2.67Gbps eSFP DWDM Optical Module

1Gbps Electrical Module

25Gbps SFP28 Optical Module
Table 1-704 Port attributes about the CR5D00E8XM25
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, and Ethernet_SNAP

Functions and Features

Table 1-705 Functions and features of the CR5D00E8XM25
Functions and Features Description
Basic function

Supports optical signal input and output of eight 25GE/10GE ports.

Supports MACSEC.
Reliability and availability Supports the hot swappable function.
Restrictions and remarks Ports 0 to 3 belong to a port group, and ports 4 to 7 belong to another one. By default, 25GE/10GE auto-negotiation is supported. You can run the port-mode group-id command in the slot view to switch the mode of a port group to 10GE/GE auto-negotiation. In LAN/WAN switching, the mode of ports in a port group must be switched at the same time.
Breakout supported No
Interface rate auto-sensing supported In 25GE mode, 10GE/25GE auto-sensing supported; In 10GE mode, GE/10GE auto-sensing supported.
FlexE supported No

Technical Specifications

Table 1-706 Technical specifications of the CR5D00E8XM25
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.2 kg (2.65 lb)
Typical power consumption [W] 37.5 W
Typical heat dissipation [BTU/hour] 121.57 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR5D00EAGF70 (10-Port 100/1000Base-X-SFP Physical Interface Card(PIC))

Overview

Table 1-707 Basic information about the CR5D00EAGF70
Item Details
Description 10-Port 100/1000Base-X-SFP Physical Interface Card(PIC)
Part Number 03031DJR
Model CR5D00EAGF70
Card type Interface Card
Silkscreen 10xFE/GE-SFP

Appearance

Figure 1-148 Appearance of the CR5D00EAGF70

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03031DJR&productModel=CR5D00EAGF70#matchRelation

Indicators

Table 1-708 Indicators on the CR5D00EAGF70
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
L/A (0–9) Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted or received.
- Off The link is Down.

Ports

Table 1-709 Ports on the CR5D00EAGF70
Port Connector Type Description Available Components
OUT0 IN0-OUT9 IN9 SFP GE/FE service signal input and output interface

155Mbps SFP Electrical Module

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1Gbps Electrical Module

1.25Gbps eSFP Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP BIDI Optical Module

125M~2.67Gbps eSFP DWDM Optical Module
Table 1-710 Port attributes about the CR5D00EAGF70
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-711 Functions and features of the CR5D00EAGF70
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides 10 GE interfaces for line-rate transmitting and receiving, and supports SFP optical modules.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-712 Technical specifications of the CR5D00EAGF70
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.6 kg (1.32 lb)
Weight with packaging [kg(lb)] 1.0 kg (2.2 lb)
Typical power consumption [W] 13.3 W
Typical heat dissipation [BTU/hour] 43.15 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR5D00EAGF95 (03033FXE: 10-port 100/1000Base-X-SFP MACsec Physical Interface Card(PIC))

Overview

Table 1-713 Basic information about the CR5D00EAGF95
Item Details
Description 10-port 100/1000Base-X-SFP MACsec Physical Interface Card(PIC)
Part Number 03033FXE
Model CR5D00EAGF95
Card type Interface Card
Silkscreen 10xFE/GE-SFP

Appearance

Figure 1-149 Appearance of the CR5D00EAGF95

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033FXE&productModel=CR5D00EAGF95#matchRelation

Indicators

Table 1-714 Indicators on the CR5D00EAGF95
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on If the indicator is steady on, the PIC is working properly.
Red Steady on If the indicator is steady on, the hardware on the PIC is faulty.
Orange Steady on If the indicator is steady on, the PIC is installed in a slot for a HIC and an alarm is reported or the PIC is not loaded with the logic.
- Off If the indicator is off, the PIC is powered off or is not registered.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarms.
- Off The board is not running or no power is input.
L/A(0 to 9) Running status indicator Green Steady on The link is Up.
Green Blink If the indicator blinks, data is being transmitted.
- Off If the indicator is off, the link is Down.

Ports

Table 1-715 Ports on the CR5D00EAGF95
Port Connector Type Description Available Components
OUT0 IN0 to OUT9 IN9 SFP GE/FE service signal input and output interface

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1Gbps Electrical Module

1.25Gbps eSFP Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP BIDI Optical Module

125M~2.67Gbps eSFP DWDM Optical Module
Table 1-716 Port attributes about the CR5D00EAGF95
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, and Ethernet_SNAP

Functions and Features

Table 1-717 Functions and features of the CR5D00EAGF95
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides ten FE/GE interfaces for line-rate transmitting and receiving, and supports SFP optical modules.

Supports MACsec.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-718 Technical specifications of the CR5D00EAGF95
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.7 kg (1.54 lb)
Weight with packaging [kg(lb)] 1.1 kg (2.43 lb)
Typical power consumption [W] 19.3 W
Typical heat dissipation [BTU/hour] 62.54 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR5D00EAGF95 (03033FXE-001: 10-port 100/1000Base-X-SFP MACsec Physical Interface Card(PIC))

Overview

Table 1-719 Basic information about the CR5D00EAGF95
Item Details
Description 10-port 100/1000Base-X-SFP MACsec Physical Interface Card(PIC)
Part Number 03033FXE-001
Model CR5D00EAGF95
Card type Interface Card
Silkscreen 10xFE/GE-SFP

Appearance

Figure 1-150 Appearance of the CR5D00EAGF95

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033FXE-001&productModel=CR5D00EAGF95#matchRelation

Indicators

Table 1-720 Indicators on the CR5D00EAGF95
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on If the indicator is steady on, the PIC is working properly.
Red Steady on If the indicator is steady on, the hardware on the PIC is faulty.
Orange Steady on If the indicator is steady on, the PIC is installed in a slot for a HIC and an alarm is reported or the PIC is not loaded with the logic.
- Off If the indicator is off, the PIC is powered off or is not registered.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarms.
- Off The board is not running or no power is input.
L/A(0 to 9) Running status indicator Green Steady on The link is Up.
Green Blink If the indicator blinks, data is being transmitted.
- Off If the indicator is off, the link is Down.

Ports

Table 1-721 Ports on the CR5D00EAGF95
Port Connector Type Description Available Components
OUT0 IN0 to OUT9 IN9 SFP GE/FE service signal input and output interface

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1Gbps Electrical Module

1.25Gbps eSFP Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP BIDI Optical Module

125M~2.67Gbps eSFP DWDM Optical Module
Table 1-722 Port attributes about the CR5D00EAGF95
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, and Ethernet_SNAP

Functions and Features

Table 1-723 Functions and features of the CR5D00EAGF95
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides ten FE/GE interfaces for line-rate transmitting and receiving, and supports SFP optical modules.

Supports MACsec.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-724 Technical specifications of the CR5D00EAGF95
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.7 kg (1.54 lb)
Weight with packaging [kg(lb)] 1.1 kg (2.43 lb)
Typical power consumption [W] 19.3 W
Typical heat dissipation [BTU/hour] 62.54 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR5D00EAGF96 (10-port 100/1000Base-X-SFP MACsec Physical Interface Card(PIC))

Overview

Table 1-725 Basic information about the CR5D00EAGF96
Item Details
Description 10-port 100/1000Base-X-SFP MACsec Physical Interface Card(PIC)
Part Number 03033GFJ
Model CR5D00EAGF96
Card type Interface Card
Silkscreen 10xGE-SFP

Appearance

Figure 1-151 Appearance of the CR5D00EAGF96

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033GFJ&productModel=CR5D00EAGF96#matchRelation

Indicators

Table 1-726 Indicators on the CR5D00EAGF96
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on If the indicator is steady on, the PIC is working properly.
Red Steady on If the indicator is steady on, the hardware on the PIC is faulty.
Orange Steady on If the indicator is steady on, the PIC is installed in a slot for a HIC and an alarm is reported or the PIC is not loaded with the logic.
- Off If the indicator is off, the PIC is powered off or is not registered.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarms.
- Off The board is not running or no power is input.
L/A(0-9) Running status indicator Green Steady on The link is Up.
Green Blink If the indicator blinks, data is being transmitted.
- Off If the indicator is off, the link is Down.

Ports

Table 1-727 Ports on the CR5D00EAGF96
Port Connector Type Description Available Components
OUT0 IN0 to OUT9 IN9 SFP Interfaces for 10-channel SFP optical signal input and output

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1Gbps Electrical Module

1.25Gbps eSFP Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP BIDI Optical Module

125M~2.67Gbps eSFP DWDM Optical Module
Table 1-728 Port attributes about the CR5D00EAGF96
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, and Ethernet_SNAP

Functions and Features

Table 1-729 Functions and features of the CR5D00EAGF96
Functions and Features Description
Basic function

Occupies one flexible card slot.

Supports the line-rate receiving and transmitting on ten FE/GE interfaces and supports SFP optical modules on the interfaces.

Supports MACSEC.
Reliability and availability Supports the hot swappable function.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-730 Technical specifications of the CR5D00EAGF96
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.2 kg (2.65 lb)
Typical power consumption [W] 30.2 W
Typical heat dissipation [BTU/hour] 98.08 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR5D00EEGF73 (03033GMU: 20-Port 100/1000Base-X-CSFP/10-Port 100/1000Base-X-SFP Physical Interface Card(PIC))

Overview

Table 1-731 Basic information about the CR5D00EEGF73
Item Details
Description 20-Port 100/1000Base-X-CSFP/10-Port 100/1000Base-X-SFP Physical Interface Card(PIC)
Part Number 03033GMU
Model CR5D00EEGF73
Card type Interface Card
Silkscreen 20xGE-CSFP

Appearance

Figure 1-152 Appearance of the CR5D00EEGF73

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033GMU&productModel=CR5D00EEGF73#matchRelation

Indicators

Table 1-732 Indicators on the CR5D00EEGF73
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the PIC is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
OUT0 IN0 to OUT19 IN19 Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted or received.
- Off The link is Down.
SRV Service Status Indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarm.
- Off The board is not running or no power is input.

Ports

Table 1-733 Ports on the CR5D00EEGF73
Port Connector Type Description Available Components
OUT0 IN0-OUT19 IN19 CSFP/SFP GE/FE service signal input and output interface

1.25Gbps eSFP Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP BIDI Optical Module

1.25Gbps CSFP BIDI Optical Module

125M~1.25Gbps CSFP BIDI Optical Module

125M~2.67Gbps eSFP DWDM Optical Module

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1Gbps Electrical Module
Table 1-734 Port attributes about the CR5D00EEGF73
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-735 Functions and features of the CR5D00EEGF73
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides 20 GE interfaces for line-rate transmitting and receiving, and supports CSFP optical modules on interfaces 0 to 19.

Provides 10 GE interfaces for line-rate transmitting and receiving, and supports SFP modules on even-numbered interfaces (0, 2, 4, ..., 18).

Supports CSFP and SFP modules used separately and in combination.

Supports MACsec.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-736 Technical specifications of the CR5D00EEGF73
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.3 kg (2.87 lb)
Typical power consumption [W] 32.2 W
Typical heat dissipation [BTU/hour] 104.34 BTU/hour
Long-term operating temperature [°C(°F)] –20°C to +65°C (–4°F to +149°F)

CR5D00EEGF73 (03033GMU-001: 20-Port 100/1000Base-X-CSFP/10-Port 100/1000Base-X-SFP Physical Interface Card(PIC))

Overview

Table 1-737 Basic information about the CR5D00EEGF73
Item Details
Description 20-Port 100/1000Base-X-CSFP/10-Port 100/1000Base-X-SFP Physical Interface Card(PIC)
Part Number 03033GMU-001
Model CR5D00EEGF73
Card type Interface Card
Silkscreen 20xGE-CSFP

Appearance

Figure 1-153 Appearance of the CR5D00EEGF73

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033GMU-001&productModel=CR5D00EEGF73#matchRelation

Indicators

Table 1-738 Indicators on the CR5D00EEGF73
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the PIC is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
OUT0 IN0 to OUT19 IN19 Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted or received.
- Off The link is Down.
SRV Service Status Indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarm.
- Off The board is not running or no power is input.

Ports

Table 1-739 Ports on the CR5D00EEGF73
Port Connector Type Description Available Components
OUT0 IN0-OUT19 IN19 CSFP/SFP GE/FE service signal input and output interface

1.25Gbps eSFP Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP BIDI Optical Module

1.25Gbps CSFP BIDI Optical Module

125M~1.25Gbps CSFP BIDI Optical Module

125M~2.67Gbps eSFP DWDM Optical Module

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1Gbps Electrical Module
Table 1-740 Port attributes about the CR5D00EEGF73
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-741 Functions and features of the CR5D00EEGF73
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides 20 GE interfaces for line-rate transmitting and receiving, and supports CSFP optical modules on interfaces 0 to 19.

Provides 10 GE interfaces for line-rate transmitting and receiving, and supports SFP modules on even-numbered interfaces (0, 2, 4, ..., 18).

Supports CSFP and SFP modules used separately and in combination.

Supports MACsec.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-742 Technical specifications of the CR5D00EEGF73
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.3 kg (2.87 lb)
Typical power consumption [W] 32.2 W
Typical heat dissipation [BTU/hour] 104.34 BTU/hour
Long-term operating temperature [°C(°F)] –20°C to +65°C (–4°F to +149°F)

CR5D00L4XF72 (4-Port 10GBase LAN/WAN-SFP+ Physical Interface Card(PIC))

Overview

Table 1-743 Basic information about the CR5D00L4XF72
Item Details
Description 4-Port 10GBase LAN/WAN-SFP+ Physical Interface Card(PIC)
Part Number 03031DJM
Model CR5D00L4XF72
Card type Interface Card
Silkscreen 4×10GE-SFP+

Appearance

Figure 1-154 Appearance of the CR5D00L4XF72

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03031DJM&productModel=CR5D00L4XF72#matchRelation

Indicators

Table 1-744 Indicators on the CR5D00L4XF72
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
L/A (0–3) Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted or received.
- Off The link is Down.

Ports

Table 1-745 Ports on the CR5D00L4XF72
Port Connector Type Description Available Components
OUT0 IN0-OUT3 IN3 SFP+ 10 GE service signal input and output interface

10Gbps SFP+ Optical Module

10Gbps SFP+ CWDM Optical Module

10Gbps SFP+ BIDI Optical Module

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1Gbps Electrical Module

1.25Gbps eSFP Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP BIDI Optical Module

125M~2.67Gbps eSFP DWDM Optical Module
Table 1-746 Port attributes about the CR5D00L4XF72
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-747 Functions and features of the CR5D00L4XF72
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides four 10GE interfaces for line-rate transmitting and receiving, and supports SFP+ optical modules.
Reliability and availability Hot swappable.
Restrictions and remarks The board does not support the OTN mode or FEC function. If a colored optical module is used and does not support optical amplifier insertion, the board supports only point-to-point optical transmission.
Breakout supported No
Interface rate auto-sensing supported Supports GE/10GE auto-sensing.
FlexE supported No

Technical Specifications

Table 1-748 Technical specifications of the CR5D00L4XF72
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.7 kg (1.54 lb)
Weight with packaging [kg(lb)] 1.1 kg (2.43 lb)
Typical power consumption [W] 25 W
Typical heat dissipation [BTU/hour] 81.11 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR5D00L4XF91 (03033FXF: 4-Port 10GE(SFP+)/GE(SFP) MACsec Physical Interface Card(PIC))

Overview

Table 1-749 Basic information about the CR5D00L4XF91
Item Details
Description 4-Port 10GE(SFP+)/GE(SFP) MACsec Physical Interface Card(PIC)
Part Number 03033FXF
Model CR5D00L4XF91
Card type Interface Card
Silkscreen 4x10GE-SFP+

Appearance

Figure 1-155 Appearance of the CR5D00L4XF91

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033FXF&productModel=CR5D00L4XF91#matchRelation

Indicators

Table 1-750 Indicators on the CR5D00L4XF91
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on If the indicator is steady on, the PIC is working properly.
Red Steady on If the indicator is steady on, the hardware on the PIC is faulty.
Orange Steady on If the indicator is steady on, the PIC is installed in a slot for a HIC and an alarm is reported or the PIC is not loaded with the logic.
- Off If the indicator is off, the PIC is powered off or is not registered.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarms.
- Off The board is not running or no power is input.
L/A(0 to 3) Running status indicator Green Steady on The link is Up.
Green Blink If the indicator blinks, data is being transmitted.
- Off If the indicator is off, the link is Down.

Ports

Table 1-751 Ports on the CR5D00L4XF91
Port Connector Type Description Available Components
OUT0 IN0 to OUT3 IN3 SFP+ Interfaces for 4-channel SFP+/SFP optical signal input and output

1.25/9.953/10.3125Gbps SFP+ Optical Module

1.25Gbps eSFP BIDI Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP Optical Module

10Gbps SFP+ BIDI Optical Module

10Gbps SFP+ CWDM Optical Module

10Gbps SFP+ Optical Module

125M~2.67Gbps eSFP DWDM Optical Module

1Gbps Electrical Module
Table 1-752 Port attributes about the CR5D00L4XF91
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.1AE MACsec
Frame format Ethernet_II, Ethernet_SAP, and Ethernet_SNAP

Functions and Features

Table 1-753 Functions and features of the CR5D00L4XF91
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides four 10GE/GE interfaces for line-rate transmitting and receiving, and supports SFP+/SFP optical modules.

Supports MACsec.
Reliability and availability Hot swappable.
Restrictions and remarks Ports 0 to 3 belong to a port group. In LAN/WAN switching, the mode of ports in a port group must be switched at the same time.
Breakout supported No
Interface rate auto-sensing supported Supports GE/10GE auto-sensing.
FlexE supported No

Technical Specifications

Table 1-754 Technical specifications of the CR5D00L4XF91
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.7 kg (1.54 lb)
Weight with packaging [kg(lb)] 1.1 kg (2.43 lb)
Typical power consumption [W] 23.9 W
Typical heat dissipation [BTU/hour] 77.38 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR5D00L4XF91 (03033FXF-001: 4-Port 10GE(SFP+)/GE(SFP) MACsec Physical Interface Card(PIC))

Overview

Table 1-755 Basic information about the CR5D00L4XF91
Item Details
Description 4-Port 10GE(SFP+)/GE(SFP) MACsec Physical Interface Card(PIC)
Part Number 03033FXF-001
Model CR5D00L4XF91
Card type Interface Card
Silkscreen 4x10GE-SFP+

Appearance

Figure 1-156 Appearance of the CR5D00L4XF91

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033FXF-001&productModel=CR5D00L4XF91#matchRelation

Indicators

Table 1-756 Indicators on the CR5D00L4XF91
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on If the indicator is steady on, the PIC is working properly.
Red Steady on If the indicator is steady on, the hardware on the PIC is faulty.
Orange Steady on If the indicator is steady on, the PIC is installed in a slot for a HIC and an alarm is reported or the PIC is not loaded with the logic.
- Off If the indicator is off, the PIC is powered off or is not registered.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarms.
- Off The board is not running or no power is input.
L/A(0 to 3) Running status indicator Green Steady on The link is Up.
Green Blink If the indicator blinks, data is being transmitted.
- Off If the indicator is off, the link is Down.

Ports

Table 1-757 Ports on the CR5D00L4XF91
Port Connector Type Description Available Components
OUT0 IN0 to OUT3 IN3 SFP+ Interfaces for 4-channel SFP+/SFP optical signal input and output

1.25/9.953/10.3125Gbps SFP+ Optical Module

1.25Gbps eSFP BIDI Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP Optical Module

10Gbps SFP+ BIDI Optical Module

10Gbps SFP+ CWDM Optical Module

10Gbps SFP+ Optical Module

125M~2.67Gbps eSFP DWDM Optical Module

1Gbps Electrical Module
Table 1-758 Port attributes about the CR5D00L4XF91
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.1AE MACsec
Frame format Ethernet_II, Ethernet_SAP, and Ethernet_SNAP

Functions and Features

Table 1-759 Functions and features of the CR5D00L4XF91
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides four 10GE/GE interfaces for line-rate transmitting and receiving, and supports SFP+/SFP optical modules.

Supports MACsec.
Reliability and availability Hot swappable.
Restrictions and remarks Ports 0 to 3 belong to a port group. In LAN/WAN switching, the mode of ports in a port group must be switched at the same time.
Breakout supported No
Interface rate auto-sensing supported Supports GE/10GE auto-sensing.
FlexE supported No

Technical Specifications

Table 1-760 Technical specifications of the CR5D00L4XF91
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.7 kg (1.54 lb)
Weight with packaging [kg(lb)] 1.1 kg (2.43 lb)
Typical power consumption [W] 23.9 W
Typical heat dissipation [BTU/hour] 77.38 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR5D00LAXF90 (10-Port 10GBase LAN/WAN-SFP+ Physical Interface Card(PIC))

Overview

Table 1-761 Basic information about the CR5D00LAXF90
Item Details
Description 10-Port 10GBase LAN/WAN-SFP+ Physical Interface Card(PIC)
Part Number 03032TUB
Model CR5D00LAXF90
Card type Interface Card
Silkscreen 10x10GE-SFP+

Appearance

Figure 1-157 Appearance of the CR5D00LAXF90

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03032TUB&productModel=CR5D00LAXF90#matchRelation

Indicators

Table 1-762 Indicators on the CR5D00LAXF90
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Yellow Steady on An alarm about a fault is generated on the board or the board is not loaded with logic.
- Off The board is not powered on or is not registered.
L/A (0–9) Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted or received.
- Off The link is Down.

Ports

Table 1-763 Ports on the CR5D00LAXF90
Port Connector Type Description Available Components
OUT0 IN0 to OUT9 IN9 SFP+ 10GE/GE service signal input and output interface

10Gbps SFP+ Optical Module

10Gbps SFP+ CWDM Optical Module

10Gbps SFP+ BIDI Optical Module

1.25Gbps eSFP Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP BIDI Optical Module

125M~2.67Gbps eSFP DWDM Optical Module

1.25/9.953/10.3125Gbps SFP+ Optical Module
Table 1-764 Port attributes about the CR5D00LAXF90
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-765 Functions and features of the CR5D00LAXF90
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides ten 10GE/GE interfaces for line-rate transmitting and receiving, and supports SFP+/SFP optical modules.
Reliability and availability Hot swappable.
Restrictions and remarks The outdoor application is not supported. The board does not support the OTN or FEC mode. When being used with the colored optical module, it does not support the intermediate optical amplifier and supports only point-to-point transmission.
Breakout supported No
Interface rate auto-sensing supported Supports GE/10GE auto-sensing.
FlexE supported No

Technical Specifications

Table 1-766 Technical specifications of the CR5D00LAXF90
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.6 kg (1.32 lb)
Typical power consumption [W] 46.7 W
Typical heat dissipation [BTU/hour] 151.51 BTU/hour
Long-term operating temperature [°C(°F)] 0°C to 45°C (32°F to 113°F)
Short-term operating temperature [°C(°F)] –5°C to +55°C (23°F to 131°F)

CR5D00LAXF91 (03033BLN: 10-Port 10GE/GE LAN/WAN-SFP+ MACsec Physical Interface Card(PIC))

Overview

Table 1-767 Basic information about the CR5D00LAXF91
Item Details
Description 10-Port 10GE/GE LAN/WAN-SFP+ MACsec Physical Interface Card(PIC)
Part Number 03033BLN
Model CR5D00LAXF91
Card type Interface Card
Silkscreen 10x10GE-SFP+

Appearance

Figure 1-158 Appearance of the CR5D00LAXF91

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033BLN&productModel=CR5D00LAXF91#matchRelation

Indicators

Table 1-768 Indicators on the CR5D00LAXF91
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
SRV Service Status Indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarm.
- Off The board is not running or no power is input.
L/A (0–9) Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted or received.
- Off The link is Down.

Ports

Table 1-769 Ports on the CR5D00LAXF91
Port Connector Type Description Available Components
OUT0 IN0-OUT9 IN9 SFP+ 10 GE service signal input and output interface

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1.25/9.953/10.3125Gbps SFP+ Optical Module

1.25Gbps eSFP BIDI Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP Optical Module

10Gbps SFP+ BIDI Optical Module

10Gbps SFP+ CWDM Optical Module

10Gbps SFP+ Optical Module

125M~2.67Gbps eSFP DWDM Optical Module

1Gbps SyncE and 1588V2 Electrical Module

1Gbps Electrical Module
Table 1-770 Port attributes about the CR5D00LAXF91
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-771 Functions and features of the CR5D00LAXF91
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides ten 10GE/GE interfaces for line-rate transmitting and receiving, and supports SFP+/SFP optical modules.

Supports MACsec.
Reliability and availability Hot swappable.
Restrictions and remarks Ports 2–5 belong to a port group, and ports 6–9 belong to another one. In LAN/WAN switching, the mode of ports in a port group must be switched at the same time.
Breakout supported No
Interface rate auto-sensing supported Supports GE/10GE auto-sensing.
FlexE supported No

Technical Specifications

Table 1-772 Technical specifications of the CR5D00LAXF91
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.2 kg (2.65 lb)
Typical power consumption [W] 32.6 W
Typical heat dissipation [BTU/hour] 105.8 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR5D00LAXF91 (03033BLN-001: 10-Port 10GE/GE LAN/WAN-SFP+ MACsec Physical Interface Card(PIC))

Overview

Table 1-773 Basic information about the CR5D00LAXF91
Item Details
Description 10-Port 10GE/GE LAN/WAN-SFP+ MACsec Physical Interface Card(PIC)
Part Number 03033BLN-001
Model CR5D00LAXF91
Card type Interface Card
Silkscreen 10x10GE-SFP+

Appearance

Figure 1-159 Appearance of the CR5D00LAXF91

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033BLN-001&productModel=CR5D00LAXF91#matchRelation

Indicators

Table 1-774 Indicators on the CR5D00LAXF91
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
SRV Service Status Indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarm.
- Off The board is not running or no power is input.
L/A (0–9) Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted or received.
- Off The link is Down.

Ports

Table 1-775 Ports on the CR5D00LAXF91
Port Connector Type Description Available Components
OUT0 IN0-OUT9 IN9 SFP+ 10 GE service signal input and output interface

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1.25/9.953/10.3125Gbps SFP+ Optical Module

1.25Gbps eSFP BIDI Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP Optical Module

10Gbps SFP+ BIDI Optical Module

10Gbps SFP+ CWDM Optical Module

10Gbps SFP+ Optical Module

125M~2.67Gbps eSFP DWDM Optical Module

1Gbps SyncE and 1588V2 Electrical Module

1Gbps Electrical Module
Table 1-776 Port attributes about the CR5D00LAXF91
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-777 Functions and features of the CR5D00LAXF91
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides ten 10GE/GE interfaces for line-rate transmitting and receiving, and supports SFP+/SFP optical modules.

Supports MACsec.
Reliability and availability Hot swappable.
Restrictions and remarks Ports 2–5 belong to a port group, and ports 6–9 belong to another one. In LAN/WAN switching, the mode of ports in a port group must be switched at the same time.
Breakout supported No
Interface rate auto-sensing supported Supports GE/10GE auto-sensing.
FlexE supported No

Technical Specifications

Table 1-778 Technical specifications of the CR5D00LAXF91
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.2 kg (2.65 lb)
Typical power consumption [W] 32.6 W
Typical heat dissipation [BTU/hour] 105.8 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR5D00P4CFC1 (4-Port OC-3c/STM-1c POS-SFP Flexible Interface Card(PIC))

Overview

Table 1-779 Basic information about the CR5D00P4CFC1
Item Details
Description 4-Port OC-3c/STM-1c POS-SFP Flexible Interface Card(PIC)
Part Number 03033GGE
Model CR5D00P4CFC1
Card type Interface Card
Silkscreen 4xSTM1-POS

Appearance

Figure 1-160 Appearance of the CR5D00P4CFC1

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033GGE&productModel=CR5D00P4CFC1#matchRelation

Indicators

Table 1-780 Indicators on the CR5D00P4CFC1
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on If the indicator is steady on, the PIC is working properly.
Red Steady on If the indicator is steady on, the hardware on the PIC is faulty.
Orange Steady on If the indicator is steady on, the PIC is installed in a slot for a HIC and an alarm is reported or the PIC is not loaded with the logic.
- Off If the indicator is off, the PIC is powered off or is not registered.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarms.
- Off The board is not running or no power is input.
L/A(0-3) Running status indicator Green Steady on The link is Up.
Green Blink If the indicator blinks, data is being transmitted.
- Off If the indicator is off, the link is Down.

Ports

Table 1-781 Ports on the CR5D00P4CFC1
Port Connector Type Description Available Components
OUT0 IN0 to OUT3 IN3 SFP STM-1 service signal input and output interface

155Mbps SFP Electrical Module

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module
Table 1-782 Port attributes about the CR5D00P4CFC1
Attributes Details
Working mode Full-duplex
Standards compliance ITU-T G707
Frame format PPP

Functions and Features

Table 1-783 Functions and features of the CR5D00P4CFC1
Functions and Features Description
Basic function Provides four 155M POS interfaces.
Reliability and availability Hot swappable.
Restrictions and remarks Ports 0 to 3 support clock master mode.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No
Link protocol PPP

Technical Specifications

Table 1-784 Technical specifications of the CR5D00P4CFC1
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.5 kg (1.1 lb)
Weight with packaging [kg(lb)] 0.9 kg (1.98 lb)
Typical power consumption [W] 16.8 W
Typical heat dissipation [BTU/hour] 54.5 BTU/hour
Long-term operating temperature [°C(°F)] –20°C to +65°C (–4°F to +149°F)

CR5D04OTU290 (4-Port 10G OTU2-XFP Physical Interface Card(PIC))

Overview

Table 1-785 Basic information about the CR5D04OTU290
Item Details
Description 4-Port 10G OTU2-XFP Physical Interface Card(PIC)
Part Number 03032RNN
Model CR5D04OTU290
Card type Interface Card
Silkscreen 4x10G-XFP

Appearance

Figure 1-161 Appearance of the CR5D04OTU290

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03032RNN&productModel=CR5D04OTU290#matchRelation

Indicators

Table 1-786 Indicators on the CR5D04OTU290
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Yellow Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
L/A0 to L/A3 Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted or received.
- Off The link is Down.

Ports

Table 1-787 Ports on the CR5D04OTU290
Port Connector Type Description Available Components
OUT0 IN0-OUT3 IN3 XFP 10 GE service signal input and output interface

10Gbps TXFP DWDM Optical Module

10Gbps XFP DWDM Optical Module
Table 1-788 Port attributes about the CR5D04OTU290
Attributes Details
Working mode Full-duplex
Standards compliance Supports Ethernet IEEE 802.3 standard network protocol
Frame format OTN

Functions and Features

Table 1-789 Functions and features of the CR5D04OTU290
Functions and Features Description
Basic function Supports 4-channel OTU2/OTU2E and 10GE LAN services.
Reliability and availability Supports the hot swappable function.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-790 Technical specifications of the CR5D04OTU290
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.2 kg (2.65 lb)
Typical power consumption [W] 52.5 W
Typical heat dissipation [BTU/hour] 170.33 BTU/hour
Long-term operating temperature [°C(°F)] 0°C to 45°C (32°F to 113°F)
Short-term operating temperature [°C(°F)] –5°C to +50°C (23°F to 122°F)

CR5D0E5XMF94 (03033GDR: 2-Port 50GBase/1-Port 100GBase-QSFP28 FlexE MACsec Physical Interface Card(PIC))

Overview

Table 1-791 Basic information about the CR5D0E5XMF94
Item Details
Description 2-Port 50GBase/1-Port 100GBase-QSFP28 FlexE MACsec Physical Interface Card(PIC)
Part Number 03033GDR
Model CR5D0E5XMF94
Card type Interface Card
Silkscreen 2x50GE-QSFP28

Appearance

Figure 1-162 Appearance of the CR5D0E5XMF94

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033GDR&productModel=CR5D0E5XMF94#matchRelation

Indicators

Table 1-792 Indicators on the CR5D0E5XMF94
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
SRV Service Status Indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarm.
- Off The board is not running or no power is input.
L/A (0–1) Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted or received.
- Off The link is Down.
BREAKOUT (0–3) Breakout channel indicator Green Blink Each indicator for channels 0, 1, 2, and 3 turns on for 5s in sequence to indicate the status of the corresponding channel. This process repeats.
- Off No data is transmitting or receiving in this channel.

Ports

Table 1-793 Ports on the CR5D0E5XMF94
Port Connector Type Description Available Components
OUT0 IN0-OUT1 IN1 QSFP28 100 GE/50 GE service signal input and output interface

100Gbps QSFP28 Optical Module

40Gbps QSFP+ Optical Module

50Gbps QSFP28 BIDI Optical Module

50Gbps QSFP28 Optical Module

Optical Amplifier Module
Table 1-794 Port attributes about the CR5D0E5XMF94
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-795 Functions and features of the CR5D0E5XMF94
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides two 50GE interfaces or one 100GE interface for line-rate transmitting and receiving, and supports QSFP28 optical modules.

Supports FlexE and MACsec.
Reliability and availability Hot swappable.
Restrictions and remarks

Port 0 supports 100GE, 50GE, 40GE, 4x25GE breakout, and 4x10GE breakout. Port 1 is valid only when port 0 is 50GE.

If the switch-mode command is set to auto and port 0 has a 100GE optical module or a 40GE optical module installed, the port automatically works in 100GE/40GE mode. In this case, port 0 takes effect, but port 1 does not take effect. If a 50GE optical module is inserted into port 0, ports 0 and 1 are both valid, and port 0 automatically works in 50GE mode. If port 1 works in 50GE mode and services are running on port 1, port 0 does not support auto-sensing.
Breakout supported

Yes.

To enable the breakout function on a port, run the port split command.
Interface rate auto-sensing supported Supports 40GE/50GE/100GE auto-sensing.
FlexE supported

Yes

Physical ports 0 and 1 can be added to the same group. port-id ranges from 129 to 148 and from 1000 to 3000. A maximum of 20 FlexE clients can be created.

Technical Specifications

Table 1-796 Technical specifications of the CR5D0E5XMF94
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.2 kg (2.65 lb)
Typical power consumption [W] 28.8 W
Typical heat dissipation [BTU/hour] 93.47 BTU/hour
Long-term operating temperature [°C(°F)] –5°C to +55°C (23°F to 131°F)

CR5D0E5XMF94 (03033GDR-001: 2-Port 50GBase/1-Port 100GBase-QSFP28 FlexE MACsec Physical Interface Card(PIC))

Overview

Table 1-797 Basic information about the CR5D0E5XMF94
Item Details
Description 2-Port 50GBase/1-Port 100GBase-QSFP28 FlexE MACsec Physical Interface Card(PIC)
Part Number 03033GDR-001
Model CR5D0E5XMF94
Card type Interface Card
Silkscreen 2x50GE-QSFP28

Appearance

Figure 1-163 Appearance of the CR5D0E5XMF94

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033GDR-001&productModel=CR5D0E5XMF94#matchRelation

Indicators

Table 1-798 Indicators on the CR5D0E5XMF94
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
SRV Service Status Indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarm.
- Off The board is not running or no power is input.
L/A (0–1) Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted or received.
- Off The link is Down.
BREAKOUT (0–3) Breakout channel indicator Green Blink Each indicator for channels 0, 1, 2, and 3 turns on for 5s in sequence to indicate the status of the corresponding channel. This process repeats.
- Off No data is transmitting or receiving in this channel.

Ports

Table 1-799 Ports on the CR5D0E5XMF94
Port Connector Type Description Available Components
OUT0 IN0-OUT1 IN1 QSFP28 100 GE/50 GE service signal input and output interface

100Gbps QSFP28 Optical Module

40Gbps QSFP+ Optical Module

50Gbps QSFP28 BIDI Optical Module

50Gbps QSFP28 Optical Module

Optical Amplifier Module
Table 1-800 Port attributes about the CR5D0E5XMF94
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-801 Functions and features of the CR5D0E5XMF94
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides two 50GE interfaces or one 100GE interface for line-rate transmitting and receiving, and supports QSFP28 optical modules.

Supports FlexE and MACsec.
Reliability and availability Hot swappable.
Restrictions and remarks

Port 0 supports 100GE, 50GE, 40GE, 4x25GE breakout, and 4x10GE breakout. Port 1 is valid only when port 0 is 50GE.

If the switch-mode command is set to auto and port 0 has a 100GE optical module or a 40GE optical module installed, the port automatically works in 100GE/40GE mode. In this case, port 0 takes effect, but port 1 does not take effect. If a 50GE optical module is inserted into port 0, ports 0 and 1 are both valid, and port 0 automatically works in 50GE mode. If port 1 works in 50GE mode and services are running on port 1, port 0 does not support auto-sensing.
Breakout supported

Yes.

To enable the breakout function on a port, run the port split command.
Interface rate auto-sensing supported Supports 40GE/50GE/100GE auto-sensing.
FlexE supported

Yes

Physical ports 0 and 1 can be added to the same group. port-id ranges from 129 to 148 and from 1000 to 3000. A maximum of 20 FlexE clients can be created.

Technical Specifications

Table 1-802 Technical specifications of the CR5D0E5XMF94
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.2 kg (2.65 lb)
Typical power consumption [W] 28.8 W
Typical heat dissipation [BTU/hour] 93.47 BTU/hour
Long-term operating temperature [°C(°F)] –5°C to +55°C (23°F to 131°F)

CR5DE2NE4X14 (03033GDS: 2-Port 100GBase/50GBase-QSFP28 FlexE MACsec Interface Card(PIC))

Overview

Table 1-803 Basic information about the CR5DE2NE4X14
Item Details
Description 2-Port 100GBase/50GBase-QSFP28 FlexE MACsec Interface Card(PIC)
Part Number 03033GDS
Model CR5DE2NE4X14
Card type Interface Card
Silkscreen 2x100GE-QSFP28

Appearance

Figure 1-164 Appearance of the CR5DE2NE4X14

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033GDS&productModel=CR5DE2NE4X14#matchRelation

Indicators

Table 1-804 Indicators on the CR5DE2NE4X14
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
SRV Service Status Indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarm.
- Off The board is not running or no power is input.
L/A (0–1) Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted or received.
- Off The link is Down.
BREAKOUT (0–3) Breakout channel indicator Green Blink Each indicator for channels 0, 1, 2, and 3 turns on for 5s in sequence to indicate the status of the corresponding channel. This process repeats.
- Off No data is transmitting or receiving in this channel.

Ports

Table 1-805 Ports on the CR5DE2NE4X14
Port Connector Type Description Available Components
OUT0 IN0-OUT1 IN1 QSFP28 100 GE/50 GE service signal input and output interface

100Gbps QSFP28 Optical Module

40Gbps QSFP+ Optical Module

50Gbps QSFP28 BIDI Optical Module

50Gbps QSFP28 Optical Module

Optical Amplifier Module
Table 1-806 Port attributes about the CR5DE2NE4X14
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-807 Functions and features of the CR5DE2NE4X14
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides two 100GE/50GE interfaces for line-rate transmitting and receiving, and supports QSFP28 optical modules.

FlexE and MACsec are supported.
Reliability and availability Hot swappable.
Restrictions and remarks Supports 100GE, 50GE, 40GE, 4x25GE breakout, and 4x10GE breakout.
Breakout supported

Yes.

To enable the breakout function on a port, run the port split command.
Interface rate auto-sensing supported Supports 40GE/50GE/100GE auto-sensing.
FlexE supported

Yes

Physical ports 0 and 1 can be added to the same group. port-id ranges from 2 to 21 and from 1000 to 3000. A maximum of 20 FlexE clients can be created.

Specifically, the interface card on the CX600-X2-M8A, NE40E-X2-M8A, NetEngine 8000 M8, NetEngine 8000E M8, PTN 6900-2-M8A, and PTN 6900-2-M8C supports the following FlexE specifications:

Physical port 0 can be added to one group. port-id ranges from 2 to 11 and from 1000 to 3000. A maximum of 10 FlexE clients can be created.

Physical port 1 can be added to one group. port-id ranges from 12 to 21 and from 1000 to 3000. A maximum of 10 FlexE clients can be created.

Technical Specifications

Table 1-808 Technical specifications of the CR5DE2NE4X14
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.2 kg (2.65 lb)
Typical power consumption [W] 32.2 W
Typical heat dissipation [BTU/hour] 104.41 BTU/hour
Long-term operating temperature [°C(°F)] –5°C to +55°C (23°F to 131°F)

CR5DE2NE4X14 (03033GDS-001: 2-Port 100GBase/50GBase-QSFP28 FlexE MACsec Interface Card(PIC))

Overview

Table 1-809 Basic information about the CR5DE2NE4X14
Item Details
Description 2-Port 100GBase/50GBase-QSFP28 FlexE MACsec Interface Card(PIC)
Part Number 03033GDS-001
Model CR5DE2NE4X14
Card type Interface Card
Silkscreen 2x100GE-QSFP28

Appearance

Figure 1-165 Appearance of the CR5DE2NE4X14

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033GDS-001&productModel=CR5DE2NE4X14#matchRelation

Indicators

Table 1-810 Indicators on the CR5DE2NE4X14
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
SRV Service Status Indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarm.
- Off The board is not running or no power is input.
L/A (0–1) Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted or received.
- Off The link is Down.
BREAKOUT (0–3) Breakout channel indicator Green Blink Each indicator for channels 0, 1, 2, and 3 turns on for 5s in sequence to indicate the status of the corresponding channel. This process repeats.
- Off No data is transmitting or receiving in this channel.

Ports

Table 1-811 Ports on the CR5DE2NE4X14
Port Connector Type Description Available Components
OUT0 IN0-OUT1 IN1 QSFP28 100 GE/50 GE service signal input and output interface

100Gbps QSFP28 Optical Module

40Gbps QSFP+ Optical Module

50Gbps QSFP28 BIDI Optical Module

50Gbps QSFP28 Optical Module

Optical Amplifier Module
Table 1-812 Port attributes about the CR5DE2NE4X14
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-813 Functions and features of the CR5DE2NE4X14
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides two 100GE/50GE interfaces for line-rate transmitting and receiving, and supports QSFP28 optical modules.

FlexE and MACsec are supported.
Reliability and availability Hot swappable.
Restrictions and remarks Supports 100GE, 50GE, 40GE, 4x25GE breakout, and 4x10GE breakout.
Breakout supported

Yes.

To enable the breakout function on a port, run the port split command.
Interface rate auto-sensing supported Supports 40GE/50GE/100GE auto-sensing.
FlexE supported

Yes

Physical ports 0 and 1 can be added to the same group. port-id ranges from 2 to 21 and from 1000 to 3000. A maximum of 20 FlexE clients can be created.

Specifically, the interface card on the CX600-X2-M8A, NE40E-X2-M8A, NetEngine 8000 M8, NetEngine 8000E M8, PTN 6900-2-M8A, and PTN 6900-2-M8C supports the following FlexE specifications:

Physical port 0 can be added to one group. port-id ranges from 2 to 11 and from 1000 to 3000. A maximum of 10 FlexE clients can be created.

Physical port 1 can be added to one group. port-id ranges from 12 to 21 and from 1000 to 3000. A maximum of 10 FlexE clients can be created.

Technical Specifications

Table 1-814 Technical specifications of the CR5DE2NE4X14
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.2 kg (2.65 lb)
Typical power consumption [W] 32.2 W
Typical heat dissipation [BTU/hour] 104.41 BTU/hour
Long-term operating temperature [°C(°F)] –5°C to +55°C (23°F to 131°F)

CR8D000DE1C2 (16-Port E1 Physical Interface Card(PIC,75ohm/120ohm))

Overview

Table 1-815 Basic information about the CR8D000DE1C2
Item Details
Description 16-Port E1 Physical Interface Card(PIC,75ohm/120ohm)
Part Number 03034KEG
Model CR8D000DE1C2
Card type Interface Card
Silkscreen 16xE1-75/120

Appearance

Figure 1-166 Appearance of the CR8D000DE1C2

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03034KEG&productModel=CR8D000DE1C2#matchRelation

Indicators

Table 1-816 Indicators on the CR8D000DE1C2
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The board hardware is faulty.
Orange Steady on An alarm is generated when a high-speed interface card is incorrectly inserted into a low-speed interface card slot, or the board is not loaded with logic.
- Steady off The board is not registered or is not powered on.
SRV Service status indicator Green Steady on There is no CRC error alarm on the board.
Orange Steady on There is a CRC error alarm on the board.
- Steady off The board is not powered on or is faulty.

Ports

Table 1-817 Ports on the CR8D000DE1C2
Port Connector Type Description Available Components
E1(0-15) ANEA 96 16 E1 interfaces

75-ohm/120-ohm 16xE1 cable
Table 1-818 Port attributes about the CR8D000DE1C2
Attributes Details
Working mode Full-duplex
Standards compliance IMA 1.1, RFC4385, RFC5086, RFC4553_SATOP, RFC1662
Frame format Unframed mode, CRC4, and NO-CRC4

Functions and Features

Table 1-819 Functions and features of the CR8D000DE1C2
Functions and Features Description
Basic function Supports a maximum of 16 E1 interfaces. Services on each interface can be configured.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No
Link protocol TDM, PPP, MP, ATM, IMA

Technical Specifications

Table 1-820 Technical specifications of the CR8D000DE1C2
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.52 kg (1.15 lb)
Weight with packaging [kg(lb)] 0.81 kg (1.79 lb)
Typical power consumption [W] 16.78 W
Typical heat dissipation [BTU/hour] 54.45 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR8D00E1KBC0 (1-Port 400GBase-QSFP-DD Physical Interface Card(PIC))

Overview

Table 1-821 Basic information about the CR8D00E1KBC0
Item Details
Description 1-Port 400GBase-QSFP-DD Physical Interface Card(PIC)
Part Number 03034AAY
Model CR8D00E1KBC0
Card type Interface Card
Silkscreen 1x400GE-QSFP-DD

Appearance

Figure 1-167 Appearance of the CR8D00E1KBC0

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03034AAY&productModel=CR8D00E1KBC0#matchRelation

Indicators and Buttons

Table 1-822 Indicators on the CR8D00E1KBC0
Silkscreen Name Color Status Description
STAT Running status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarm.
- Off The board is not running or no power is input.
L0 Optical Amplifier running status indicator Green Steady on The Optical Amplifier port works normally and there is no LOS.
- Off The Optical Amplifier port does not work normally or LOS occurs.
L/A1 Port running status indicator Green Steady on The link is Up.
Green Blink Data is being transmitted or received.
- Off The link is Down.
Breakout(0 to 7) Breakout channel indicator Green Steady on Breakout 0–7: breakout indicators. If breakout indicator X is on, the port indicators are showing the running status of breakout channel X. For example, if breakout indicator 0 is on, port indicators are showing the running status of breakout channel 0 (if a port indicator is blinking, breakout channel 0 on this port is receiving and transmitting data); if breakout indicator 1 is on, port indicators are showing the running status of breakout channel 1. If the breakout indicators 0 to 7 are off, the board has no breakout ports. If the board has breakout ports, each breakout indicator for channels 0 to 7 turns on for 5 seconds in sequence to indicate the status of the corresponding channel. To rapidly identify the running status of a specific breakout channel, press the Breakout button to switch to your desired indicator. For example, if you want to check the running status of breakout channel 1 on each port, press the Breakout button to have breakout indicator 1 turn on.
Table 1-823 Buttons on the CR8D00E1KBC0
Silkscreen Name Description
Breakout Breakout button When you press the button, the Breakout indicators stop status cycling and remain in the current status. Then, each time you press the button, the Breakout indicators' status switches. If you do not press the button in 60s, the Breakout indicators automatically start status cycling.

Ports

Table 1-824 Ports on the CR8D00E1KBC0
Port Connector Type Description Available Components
OUT0 IN0 QSFP28 Fiber amplifier interface (supported since V800R021C10)

Optical Amplifier Module
OUT1 IN1 QSFP-DD Inputs and outputs 400GE optical signals.

400Gbps QSFP-DD Optical Module

100Gbps QSFP28 Optical Module
Table 1-825 Port attributes about the CR8D00E1KBC0
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-826 Functions and features of the CR8D00E1KBC0
Functions and Features Description
Basic function

Occupies two flexible card slots. The line side of the board provides one 400GE QSFP-DD interface and one QSFP28 optical amplifier interface.

1. The rate of the QSFP-DD interface is 400 Gbit/s.

2. The QSFP28 fiber amplifier interface supports the fiber amplifier module (reserved).

Supports FlexE.
Reliability and availability Hot swappable.
Restrictions and remarks

1. By default, a QSFP-DD port supports 400G QSFP-DD optical modules. To enable a QSFP-DD port to support 100G QSFP28 optical modules instead, run the port split command in the system view.

2. When the board works with a 400G ZR+ optical module, the short-term operating temperature supported by the optical module ranges from –5°C to +50°C.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported

Yes

Ports on the straight-through card can be bonded to form a group. port-id ranges from 1000 to 3000. A maximum of 48 FlexE clients can be created.

Technical Specifications

Table 1-827 Technical specifications of the CR8D00E1KBC0
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 40.14 mm x 193.8 mm x 209.3 mm (1.58 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 115 mm x 317.5 mm x 305 mm (4.53 in. x 12.50 in. x 12.01 in.)
Weight without packaging [kg(lb)] 1.1 kg (2.43 lb)
Weight with packaging [kg(lb)] 1.7 kg (3.75 lb)
Typical power consumption [W] 69.8 W
Typical heat dissipation [BTU/hour] 226.34 BTU/hour
Long-term operating temperature [°C(°F)] –5°C to +55°C (23°F to 131°F)

CR8D00E1NBC2 (03034KEF: 2-Port 50GBase/1-Port 100GBase-QSFP28 FlexE MACsec Physical Interface Card(PIC))

Overview

Table 1-828 Basic information about the CR8D00E1NBC2
Item Details
Description 2-Port 50GBase/1-Port 100GBase-QSFP28 FlexE MACsec Physical Interface Card(PIC)
Part Number 03034KEF
Model CR8D00E1NBC2
Card type Interface Card
Silkscreen 2x50GE-QSFP28

Appearance

Figure 1-168 Appearance of the CR8D00E1NBC2

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03034KEF&productModel=CR8D00E1NBC2#matchRelation

Indicators

Table 1-829 Indicators on the CR8D00E1NBC2
Silkscreen Name Color Status Description
STAT Running status indicator Green Steady on The board is working properly.
Red Steady on The board hardware is faulty.
Orange Steady on An alarm is generated when a high-speed interface card is incorrectly inserted into a low-speed interface card slot, or the board is not loaded with logic.
- Steady off The board is not registered or is not powered on.
SRV Service status indicator Green Steady on There is no CRC error alarm on the board.
Orange Steady on There is a CRC error alarm on the board.
- Off The board is not powered on or is faulty.
L/A (0–1) Interface status indicator Green Steady on The link is up.
Green Blinking Data is being transmitted or received.
- Steady off The link is down.
BREAKOUT (0–3) Breakout channel indicator Green Blinking Each indicator for channels 0, 1, 2, and 3 turns on for 5s in sequence to indicate the status of the corresponding channel. This process repeats.
- Off No data is transmitting or receiving in this channel.

Ports

Table 1-830 Ports on the CR8D00E1NBC2
Port Connector Type Description Available Components
OUT0 IN0-OUT1 IN1 QSFP28 Interface for inputting and outputting 50GE/100GE optical signals

100Gbps QSFP28 Optical Module

40Gbps QSFP+ Optical Module

50Gbps QSFP28 BIDI Optical Module

50Gbps QSFP28 Optical Module

Optical Amplifier Module
Table 1-831 Port attributes about the CR8D00E1NBC2
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP

Functions and Features

Table 1-832 Functions and features of the CR8D00E1NBC2
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides two 50GE interfaces or one 100GE interface for line-rate transmitting and receiving, and supports QSFP28 optical modules.

Supports FlexE and MACsec.
Reliability and availability Hot swappable.
Restrictions and remarks

Port 0 supports 100GE, 50GE, 40GE, 4x25GE breakout, and 4x10GE breakout. Port 1 is valid only when port 0 is 50GE.

If the switch-mode command is set to auto and port 0 has a 100GE optical module or a 40GE optical module installed, the port automatically works in 100GE/40GE mode. In this case, port 0 takes effect, but port 1 does not take effect. If a 50GE optical module is inserted into port 0, ports 0 and 1 are both valid, and port 0 automatically works in 50GE mode. If port 1 works in 50GE mode and services are running on port 1, port 0 does not support auto-sensing.
Breakout supported

Yes.

To enable the breakout function on a port, run the port split command.
Interface rate auto-sensing supported Supports 40GE/50GE/100GE auto-sensing.
FlexE supported

Yes

Physical ports 0 and 1 can be added to the same group. port-id ranges from 129 to 148 and from 1000 to 3000. A maximum of 20 FlexE clients can be created.

Technical Specifications

Table 1-833 Technical specifications of the CR8D00E1NBC2
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.2 kg (2.65 lb)
Typical power consumption [W] 28.8 W
Typical heat dissipation [BTU/hour] 93.47 BTU/hour
Long-term operating temperature [°C(°F)] –5°C to +55°C (23°F to 131°F)

CR8D00E1NBC2 (03035JVJ: 2-Port 50GBase/1-Port 100GBase-QSFP28 FlexE MACsec Physical Interface Card(PIC) for SME)

Overview

Table 1-834 Basic information about the CR8D00E1NBC2
Item Details
Description 2-Port 50GBase/1-Port 100GBase-QSFP28 FlexE MACsec Physical Interface Card(PIC) for SME
Part Number 03035JVJ
Model CR8D00E1NBC2
Card type Interface Card
Silkscreen 2x50GE-QSFP28

Appearance

Figure 1-169 Appearance of the CR8D00E1NBC2

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03035JVJ&productModel=CR8D00E1NBC2#matchRelation

Indicators

Table 1-835 Indicators on the CR8D00E1NBC2
Silkscreen Name Color Status Description
STAT Running status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on An alarm is generated when a high-speed interface card is incorrectly inserted into a low-speed interface card slot, or the board is not loaded with logic.
- Steady off The board is not powered on or is not registered.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarms.
- Off The board is not powered on or is faulty.
L/A (0–1) Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted and received.
- Steady off The link is Down.
BREAKOUT (0–3) Breakout channel indicator Green Blinking Each indicator for channels 0, 1, 2, and 3 turns on for 5s in sequence to indicate the status of the corresponding channel. This process repeats.
- Off No data is transmitting or receiving in this channel.

Ports

Table 1-836 Ports on the CR8D00E1NBC2
Port Connector Type Description Available Components
OUT0 IN0-OUT1 IN1 QSFP28 Interface for inputting and outputting 50GE/100GE optical signals

100Gbps QSFP28 Optical Module

40Gbps QSFP+ Optical Module

50Gbps QSFP28 BIDI Optical Module

50Gbps QSFP28 Optical Module

Optical Amplifier Module
Table 1-837 Port attributes about the CR8D00E1NBC2
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP

Functions and Features

Table 1-838 Functions and features of the CR8D00E1NBC2
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides two 50GE interfaces or one 100GE interface for line-rate transmitting and receiving, and supports QSFP28 optical modules.

Supports FlexE and MACsec.
Reliability and availability Hot swappable
Restrictions and remarks

Port 0 supports 100GE, 50GE, 40GE, 4x25GE breakout, and 4x10GE breakout. Port 1 is valid only when port 0 is 50GE.

If the switch-mode command is set to auto and port 0 has a 100GE optical module or a 40GE optical module installed, the port automatically works in 100GE/40GE mode. In this case, port 0 takes effect, but port 1 does not take effect. If a 50GE optical module is inserted into port 0, ports 0 and 1 are both valid, and port 0 automatically works in 50GE mode. If port 1 works in 50GE mode and services are running on port 1, port 0 does not support auto-sensing.
Breakout supported

Yes.

To enable the breakout function on a port, run the port split command.
Interface rate auto-sensing supported Supports 40GE/50GE/100GE auto-sensing.
FlexE supported

Yes

Physical ports 0 and 1 can be added to the same group. port-id ranges from 129 to 148 and from 1000 to 3000. A maximum of 20 FlexE clients can be created.

Technical Specifications

Table 1-839 Technical specifications of the CR8D00E1NBC2
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.2 kg (2.65 lb)
Typical power consumption [W] 28.8 W
Typical heat dissipation [BTU/hour] 93.47 BTU/hour
Long-term operating temperature [°C(°F)] –5°C to +55°C (23°F to 131°F)

CR8D00E1NCC1 (1-Port 100GE/ 1-Port 200GE CFP2 Physical Interface Card(PIC) (Enable 1*100GE by default))

Overview

Table 1-840 Basic information about the CR8D00E1NCC1
Item Details
Description 1-Port 100GE/ 1-Port 200GE CFP2 Physical Interface Card(PIC) (Enable 1*100GE by default)
Part Number 03034REK
Model CR8D00E1NCC1
Card type Interface Card
Silkscreen 1x100/200GE-CFP2

Appearance

Figure 1-170 Appearance of the CR8D00E1NCC1

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03034REK&productModel=CR8D00E1NCC1#matchRelation

Indicators

Table 1-841 Indicators on the CR8D00E1NCC1
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The board hardware is faulty.
Orange Steady on An alarm is generated when a high-speed interface card is incorrectly inserted into a low-speed interface card slot, or the board is not loaded with logic.
- Off The board is not registered or is not powered on.
SRV Service status indicator Green Steady on There is no CRC error alarm on the board.
Orange Steady on There is a CRC error alarm on the board.
- Off The board is not powered on or is faulty.
L/A 0 Running status indicator Green Steady on The link is up.
Green Blinking Data is being transmitted or received.
- Off The link is down.

Ports

Table 1-842 Ports on the CR8D00E1NCC1
Port Connector Type Description Available Components
OUT0 IN0 CFP2 Interfaces for 1-channel CFP2 optical signal input and output

100Gbps CFP2 Optical Module

100Gbps CFP2 DWDM Optical Module
Table 1-843 Port attributes about the CR8D00E1NCC1
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP

Functions and Features

Table 1-844 Functions and features of the CR8D00E1NCC1
Functions and Features Description
Basic function

Provides one 100GEBase CFP2 interface. The 200GE interface capability is reserved on the hardware.

MACsec is supported.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-845 Technical specifications of the CR8D00E1NCC1
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.2 kg (2.65 lb)
Typical power consumption [W] 43.2 W
Typical heat dissipation [BTU/hour] 140.16 BTU/hour
Long-term operating temperature [°C(°F)] –5°C to +50°C (23°F to 122°F)

CR8D00E2NBC4 (03034KEN: 2-Port 100GBase/50GBase-QSFP28 FlexE MACsec Physical Interface Card(PIC))

Overview

Table 1-846 Basic information about the CR8D00E2NBC4
Item Details
Description 2-Port 100GBase/50GBase-QSFP28 FlexE MACsec Physical Interface Card(PIC)
Part Number 03034KEN
Model CR8D00E2NBC4
Card type Interface Card
Silkscreen 2x100GE-QSFP28

Appearance

Figure 1-171 Appearance of the CR8D00E2NBC4

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03034KEN&productModel=CR8D00E2NBC4#matchRelation

Indicators

Table 1-847 Indicators on the CR8D00E2NBC4
Silkscreen Name Color Status Description
STAT Running status indicator Green Steady on The board is working properly.
Red Steady on The board hardware is faulty.
Orange Steady on An alarm is generated when a high-speed interface card is incorrectly inserted into a low-speed interface card slot, or the board is not loaded with logic.
- Steady off The board is not registered or is not powered on.
SRV Service status indicator Green Steady on There is no CRC error alarm on the board.
Orange Steady on There is a CRC error alarm on the board.
- Off The board is not powered on or is faulty.
L/A (0–1) Interface status indicator Green Steady on The link is up.
Green Blinking Data is being transmitted or received.
- Steady off The link is down.
BREAKOUT (0–3) Breakout channel indicator Green Blinking Each indicator for channels 0, 1, 2, and 3 turns on for 5s in sequence to indicate the status of the corresponding channel. This process repeats.
- Steady off No data is transmitting or receiving in this channel.

Ports

Table 1-848 Ports on the CR8D00E2NBC4
Port Connector Type Description Available Components
OUT0 IN0-OUT1 IN1 QSFP28 Interface for inputting and outputting 50GE/100GE optical signals

100Gbps QSFP28 Optical Module

40Gbps QSFP+ Optical Module

50Gbps QSFP28 BIDI Optical Module

50Gbps QSFP28 Optical Module

Optical Amplifier Module
Table 1-849 Port attributes about the CR8D00E2NBC4
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP

Functions and Features

Table 1-850 Functions and features of the CR8D00E2NBC4
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides two 100GE/50GE interfaces for line-rate transmitting and receiving, and supports QSFP28 optical modules.

FlexE and MACsec are supported.
Reliability and availability Hot swappable.
Restrictions and remarks Supports 100GE, 50GE, 40GE, 4x25GE breakout, and 4x10GE breakout.
Breakout supported

Yes.

To enable the breakout function on a port, run the port split command.
Interface rate auto-sensing supported Supports 40GE/50GE/100GE auto-sensing.
FlexE supported

Yes

Physical ports 0 and 1 can be added to the same group. port-id ranges from 2 to 21 and from 1000 to 3000. A maximum of 20 FlexE clients can be created.

Specifically, the interface card on the NetEngine 8000E M8 and NetEngine 8000 M8 supports the following FlexE specifications:

Physical port 0 can be added to one group. port-id ranges from 2 to 11 and from 1000 to 3000. A maximum of 10 FlexE clients can be created.

Physical port 1 can be added to the same group. port-id ranges from 12 to 21 and from 1000 to 3000. A maximum of 10 FlexE clients can be created.

Technical Specifications

Table 1-851 Technical specifications of the CR8D00E2NBC4
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.2 kg (2.65 lb)
Typical power consumption [W] 32.2 W
Typical heat dissipation [BTU/hour] 104.41 BTU/hour
Long-term operating temperature [°C(°F)] –5°C to +55°C (23°F to 131°F)

CR8D00E2NBC4 (03035JVF: 2-Port 100GBase/50GBase-QSFP28 FlexE MACsec Physical Interface Card(PIC) for SME)

Overview

Table 1-852 Basic information about the CR8D00E2NBC4
Item Details
Description 2-Port 100GBase/50GBase-QSFP28 FlexE MACsec Physical Interface Card(PIC) for SME
Part Number 03035JVF
Model CR8D00E2NBC4
Card type Interface Card
Silkscreen 2x100GE-QSFP28

Appearance

Figure 1-172 Appearance of the CR8D00E2NBC4

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03035JVF&productModel=CR8D00E2NBC4#matchRelation

Indicators

Table 1-853 Indicators on the CR8D00E2NBC4
Silkscreen Name Color Status Description
STAT Running status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on An alarm is generated when a high-speed interface card is incorrectly inserted into a low-speed interface card slot, or the board is not loaded with logic.
- Steady off The board is not powered on or is not registered.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarms.
- Off The board is not powered on or is faulty.
L/A (0–1) Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted and received.
- Steady off The link is Down.
BREAKOUT (0–3) Breakout channel indicator Green Blinking Each indicator for channels 0, 1, 2, and 3 turns on for 5s in sequence to indicate the status of the corresponding channel. This process repeats.
- Steady off No data is transmitting or receiving in this channel.

Ports

Table 1-854 Ports on the CR8D00E2NBC4
Port Connector Type Description Available Components
OUT0 IN0-OUT1 IN1 QSFP28 Interface for inputting and outputting 50GE/100GE optical signals

100Gbps QSFP28 Optical Module

40Gbps QSFP+ Optical Module

50Gbps QSFP28 BIDI Optical Module

50Gbps QSFP28 Optical Module

Optical Amplifier Module
Table 1-855 Port attributes about the CR8D00E2NBC4
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP

Functions and Features

Table 1-856 Functions and features of the CR8D00E2NBC4
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides two 100GE/50GE interfaces for line-rate transmitting and receiving, and supports QSFP28 optical modules.

FlexE and MACsec are supported.
Reliability and availability Hot swappable
Restrictions and remarks 100GE, 50GE, 40GE, 4*25GE, and 4*10GE interfaces are supported.
Breakout supported

Yes.

To enable the breakout function on a port, run the port split command.
Interface rate auto-sensing supported Supports 40GE/50GE/100GE auto-sensing.
FlexE supported

Yes

Physical ports 0 and 1 can be added to the same group. port-id ranges from 2 to 21 and from 1000 to 3000. A maximum of 20 FlexE clients can be created.

Specifically, the interface card on the NetEngine 8000E M8 and NetEngine 8000 M8 supports the following FlexE specifications:

Physical port 0 can be added to one group. port-id ranges from 2 to 11 and from 1000 to 3000. A maximum of 10 FlexE clients can be created.

Physical port 1 can be added to the same group. port-id ranges from 12 to 21 and from 1000 to 3000. A maximum of 10 FlexE clients can be created.

Technical Specifications

Table 1-857 Technical specifications of the CR8D00E2NBC4
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.2 kg (2.65 lb)
Typical power consumption [W] 32.2 W
Typical heat dissipation [BTU/hour] 104.41 BTU/hour
Long-term operating temperature [°C(°F)] –5°C to +55°C (23°F to 131°F)

CR8D00E4XFC1 (03034EDU: 4-Port 10GE-SFP+ FlexE MACsec Physical Interface Card(PIC))

Overview

Table 1-858 Basic information about the CR8D00E4XFC1
Item Details
Description 4-Port 10GE-SFP+ FlexE MACsec Physical Interface Card(PIC)
Part Number 03034EDU
Model CR8D00E4XFC1
Card type Interface Card
Silkscreen 4x10GE-SFP+

Appearance

Figure 1-173 Appearance of the CR8D00E4XFC1

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03034EDU&productModel=CR8D00E4XFC1#matchRelation

Indicators

Table 1-859 Indicators on the CR8D00E4XFC1
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
SRV Service Status Indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarm.
- Off The board is not running or no power is input.
L/A (0–3) Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted or received.
- Off The link is Down.

Ports

Table 1-860 Ports on the CR8D00E4XFC1
Port Connector Type Description Available Components
OUT0 IN0-OUT3 IN3 SFP+ 10GE/GE service signal input and output interface

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1.25/9.953/10.3125Gbps SFP+ Optical Module

1.25Gbps eSFP BIDI Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP Optical Module

10Gbps SFP+ BIDI Optical Module

10Gbps SFP+ CWDM Optical Module

10Gbps SFP+ Optical Module

125M~2.67Gbps eSFP DWDM Optical Module

1Gbps SyncE and 1588V2 Electrical Module

1Gbps Electrical Module
Table 1-861 Port attributes about the CR8D00E4XFC1
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-862 Functions and features of the CR8D00E4XFC1
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides four 10GE/GE interfaces for line-rate transmitting and receiving, and supports SFP+/SFP optical modules.

Supports FlexE and MACsec.
Reliability and availability Hot swappable.
Restrictions and remarks

1. By default, a port works in standard Ethernet mode. You can run the flexe enable port port-id command in the system view to switch the port to the FlexE mode. An interface working in GE mode cannot be switched to the FlexE mode.

2. A port working in FlexE mode cannot connect to a standard 10GE port.

3. This FlexE mode supports only GE-granularity hard pipes and interconnection with Huawei FlexE interfaces with the same GE granularity.
Breakout supported No
Interface rate auto-sensing supported Supports GE/10GE auto-sensing.
FlexE supported

Yes

Physical port 0 can be added to one group, and port-id ranges from 1000 to 3000. A maximum of six FlexE clients can be created.

Physical port 1 can be added to one group, and port-id ranges from 1000 to 3000. A maximum of six FlexE clients can be created.

Physical port 2 can be added to one group, and port-id ranges from 1000 to 3000. A maximum of six FlexE clients can be created.

Physical port 3 can be added to one group, and port-id ranges from 1000 to 3000. A maximum of six FlexE clients can be created.

Technical Specifications

Table 1-863 Technical specifications of the CR8D00E4XFC1
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.7 kg (1.54 lb)
Weight with packaging [kg(lb)] 1.1 kg (2.43 lb)
Typical power consumption [W] 17.4 W
Typical heat dissipation [BTU/hour] 56.40 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR8D00E4XFC1 (03034EDU-001: 4-Port 10GE-SFP+ FlexE MACsec Physical Interface Card(PIC))

Overview

Table 1-864 Basic information about the CR8D00E4XFC1
Item Details
Description 4-Port 10GE-SFP+ FlexE MACsec Physical Interface Card(PIC)
Part Number 03034EDU-001
Model CR8D00E4XFC1
Card type Interface Card
Silkscreen 4x10GE-SFP+

Appearance

Figure 1-174 Appearance of the CR8D00E4XFC1

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03034EDU-001&productModel=CR8D00E4XFC1#matchRelation

Indicators

Table 1-865 Indicators on the CR8D00E4XFC1
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
SRV Service Status Indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarm.
- Off The board is not running or no power is input.
L/A (0–3) Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted or received.
- Off The link is Down.

Ports

Table 1-866 Ports on the CR8D00E4XFC1
Port Connector Type Description Available Components
OUT0 IN0-OUT3 IN3 SFP+ 10GE/GE service signal input and output interface

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1.25/9.953/10.3125Gbps SFP+ Optical Module

1.25Gbps eSFP BIDI Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP Optical Module

10Gbps SFP+ BIDI Optical Module

10Gbps SFP+ CWDM Optical Module

10Gbps SFP+ Optical Module

125M~2.67Gbps eSFP DWDM Optical Module

1Gbps SyncE and 1588V2 Electrical Module

1Gbps Electrical Module
Table 1-867 Port attributes about the CR8D00E4XFC1
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-868 Functions and features of the CR8D00E4XFC1
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides four 10GE/GE interfaces for line-rate transmitting and receiving, and supports SFP+/SFP optical modules.

Supports FlexE and MACsec.
Reliability and availability Hot swappable.
Restrictions and remarks

1. By default, a port works in standard Ethernet mode. You can run the flexe enable port port-id command in the system view to switch the port to the FlexE mode. An interface working in GE mode cannot be switched to the FlexE mode.

2. A port working in FlexE mode cannot connect to a standard 10GE port.

3. This FlexE mode supports only GE-granularity hard pipes and interconnection with Huawei FlexE interfaces with the same GE granularity.
Breakout supported No
Interface rate auto-sensing supported Supports GE/10GE auto-sensing.
FlexE supported

Yes

Physical port 0 can be added to one group, and port-id ranges from 1000 to 3000. A maximum of six FlexE clients can be created.

Physical port 1 can be added to one group, and port-id ranges from 1000 to 3000. A maximum of six FlexE clients can be created.

Physical port 2 can be added to one group, and port-id ranges from 1000 to 3000. A maximum of six FlexE clients can be created.

Physical port 3 can be added to one group, and port-id ranges from 1000 to 3000. A maximum of six FlexE clients can be created.

Technical Specifications

Table 1-869 Technical specifications of the CR8D00E4XFC1
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.7 kg (1.54 lb)
Weight with packaging [kg(lb)] 1.1 kg (2.43 lb)
Typical power consumption [W] 17.4 W
Typical heat dissipation [BTU/hour] 56.40 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR8D00E4XFC3 (4-Port 10GE(SFP+)/GE(SFP) MACsec Physical Interface Card(PIC))

Overview

Table 1-870 Basic information about the CR8D00E4XFC3
Item Details
Description 4-Port 10GE(SFP+)/GE(SFP) MACsec Physical Interface Card(PIC)
Part Number 03034PJJ
Model CR8D00E4XFC3
Card type Interface Card
Silkscreen 4x10GE-SFP+

Appearance

Figure 1-175 Appearance of the CR8D00E4XFC3

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03034PJJ&productModel=CR8D00E4XFC3#matchRelation

Indicators

Table 1-871 Indicators on the CR8D00E4XFC3
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The board hardware is faulty.
Orange Steady on An alarm is generated when a high-speed interface card is incorrectly inserted into a low-speed interface card slot, or the board is not loaded with logic.
- Steady off The board is not registered or is not powered on.
SRV Service status indicator Green Steady on There is no CRC error alarm on the board.
Orange Steady on There is a CRC error alarm on the board.
- Steady off The board is not powered on or is faulty.
L/A (0–3) Running status indicator Green Steady on The link is up.
Green Blinking Data is being transmitted or received.
- Steady off The link is down.

Ports

Table 1-872 Ports on the CR8D00E4XFC3
Port Connector Type Description Available Components
OUT0 IN0–OUT3 IN3 SFP+ Interfaces for 4-channel SFP+/SFP optical signal input and output

1.25/9.953/10.3125Gbps SFP+ Optical Module

1.25Gbps eSFP BIDI Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP Optical Module

10Gbps SFP+ BIDI Optical Module

10Gbps SFP+ CWDM Optical Module

10Gbps SFP+ Optical Module

125M~2.67Gbps eSFP DWDM Optical Module

1Gbps Electrical Module
Table 1-873 Port attributes about the CR8D00E4XFC3
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.1AE MACsec
Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP

Functions and Features

Table 1-874 Functions and features of the CR8D00E4XFC3
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides four 10GE/GE interfaces for line-rate transmitting and receiving, and supports SFP+/SFP optical modules.

Supports MACsec.
Reliability and availability Hot swappable.
Restrictions and remarks Ports 0 to 3 belong to a port group. In LAN/WAN switching, the mode of ports in a port group must be switched at the same time.
Breakout supported No
Interface rate auto-sensing supported Supports GE/10GE auto-sensing.
FlexE supported No

Technical Specifications

Table 1-875 Technical specifications of the CR8D00E4XFC3
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.7 kg (1.54 lb)
Weight with packaging [kg(lb)] 1.1 kg (2.43 lb)
Typical power consumption [W] 23.9 W
Typical heat dissipation [BTU/hour] 77.38 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR8D00E4XFC4 (4-Port 10GE-SFP+ FlexE MACsec Physical Interface Card(PIC))

Overview

Table 1-876 Basic information about the CR8D00E4XFC4
Item Details
Description 4-Port 10GE-SFP+ FlexE MACsec Physical Interface Card(PIC)
Part Number 03034SUQ
Model CR8D00E4XFC4
Card type Interface Card
Silkscreen 4x10GE-SFP+

Appearance

Figure 1-176 Appearance of the CR8D00E4XFC4

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03034SUQ&productModel=CR8D00E4XFC4#matchRelation

Indicators

Table 1-877 Indicators on the CR8D00E4XFC4
Silkscreen Name Color Status Description
STAT Running status indicator Green Steady on The board is working properly.
Red Steady on The board hardware is faulty.
Orange Steady on An alarm is generated when a high-speed interface card is incorrectly inserted into a low-speed interface card slot, or the board is not loaded with logic.
- Off The board is not registered or is not powered on.
SRV Service status indicator Green Steady on There is no CRC error alarm on the board.
Orange Steady on There is a CRC error alarm on the board.
- Off The board is not powered on or is faulty.
L/A (0–3) Interface status indicator Green Steady on The link is up.
Green Blinking Data is being transmitted or received.
- Off The link is down.

Ports

Table 1-878 Ports on the CR8D00E4XFC4
Port Connector Type Description Available Components
OUT0 IN0-OUT3 IN3 SFP+ Interface for inputting and outputting 10GE/GE optical signals

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1.25/9.953/10.3125Gbps SFP+ Optical Module

1.25Gbps eSFP BIDI Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP Optical Module

10Gbps SFP+ BIDI Optical Module

10Gbps SFP+ CWDM Optical Module

10Gbps SFP+ Optical Module

125M~2.67Gbps eSFP DWDM Optical Module

1Gbps SyncE and 1588V2 Electrical Module

1Gbps Electrical Module
Table 1-879 Port attributes about the CR8D00E4XFC4
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP

Functions and Features

Table 1-880 Functions and features of the CR8D00E4XFC4
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides four 10GE/GE interfaces for line-rate transmitting and receiving, and supports SFP+/SFP optical modules.

Supports FlexE and MACsec.
Reliability and availability Hot swappable.
Restrictions and remarks

1. By default, an interface works in standard Ethernet mode. To change the interface mode to FlexE, run the flexe enable port port-id command in the system view. An interface working in GE mode cannot be switched to the FlexE mode.

2. An interface in FlexE mode cannot interconnect with a standard 10GE interface.

3. This FlexE mode supports only GE-granularity hard pipes and can be interconnected only with Huawei's GE-granularity FlexE interfaces that use the same protocol.
Breakout supported No
Interface rate auto-sensing supported GE/10GE auto-sensing
FlexE supported

Yes

Physical port 0 can be added to one group, and port-id ranges from 1000 to 3000. A maximum of six FlexE clients can be created.

Physical port 1 can be added to one group, and port-id ranges from 1000 to 3000. A maximum of six FlexE clients can be created.

Physical port 2 can be added to one group, and port-id ranges from 1000 to 3000. A maximum of six FlexE clients can be created.

Physical port 3 can be added to one group, and port-id ranges from 1000 to 3000. A maximum of six FlexE clients can be created.

Technical Specifications

Table 1-881 Technical specifications of the CR8D00E4XFC4
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.7 kg (1.54 lb)
Weight with packaging [kg(lb)] 1.1 kg (2.43 lb)
Typical power consumption [W] 17.4 W
Typical heat dissipation [BTU/hour] 56.40 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR8D00E4YBC1 (4-Port 25GE-SFP28 Physical Interface Card (PIC))

Overview

Table 1-882 Basic information about the CR8D00E4YBC1
Item Details
Description 4-Port 25GE-SFP28 Physical Interface Card (PIC)
Part Number 03033VME
Model CR8D00E4YBC1
Card type Interface Card
Silkscreen 4x25GE-SFP28

Appearance

Figure 1-177 Appearance of the CR8D00E4YBC1

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033VME&productModel=CR8D00E4YBC1#matchRelation

Indicators

Table 1-883 Indicators on the CR8D00E4YBC1
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
SRV Service Status Indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarm.
- Off The board is not running or no power is input.
L/A (0–3) Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted or received.
- Off The link is Down.

Ports

Table 1-884 Ports on the CR8D00E4YBC1
Port Connector Type Description Available Components
OUT0 IN0-OUT3 IN3 SFP28 25GE/10GE service signal input and output interface

10Gbps SFP+ BIDI Optical Module

10Gbps SFP+ CWDM Optical Module

10Gbps SFP+ Optical Module

25Gbps SFP28 Optical Module

25Gbps SFP28 BIDI Optical Module
Table 1-885 Port attributes about the CR8D00E4YBC1
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-886 Functions and features of the CR8D00E4YBC1
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides four 25GE/10GE interfaces for line-rate transmitting and receiving, and supports SFP28/SFP+ optical modules.
Reliability and availability Hot swappable.
Restrictions and remarks By default, 25GE is supported. You can run the port-mode group-id command in the slot view to switch the port mode to 10GE.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-887 Technical specifications of the CR8D00E4YBC1
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.61 kg (1.34 lb)
Weight with packaging [kg(lb)] 0.95 kg (2.09 lb)
Typical power consumption [W] 18.20 W
Typical heat dissipation [BTU/hour] 59.05 BTU/hour
Long-term operating temperature [°C(°F)] –20°C to +65°C (–4°F to +149°F)

CR8D00E4YFC0 (4-Port 25GE(SFP28)/10GE(SFP+) MACsec Physical Interface Card (PIC))

Overview

Table 1-888 Basic information about the CR8D00E4YFC0
Item Details
Description 4-Port 25GE(SFP28)/10GE(SFP+) MACsec Physical Interface Card (PIC)
Part Number 03034PJH
Model CR8D00E4YFC0
Card type Interface Card
Silkscreen 4x25GE-SFP28

Appearance

Figure 1-178 Appearance of the CR8D00E4YFC0

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03034PJH&productModel=CR8D00E4YFC0#matchRelation

Indicators

Table 1-889 Indicators on the CR8D00E4YFC0
Silkscreen Name Color Status Description
STAT Running status indicator Green Steady on The board is working properly.
Red Steady on The board hardware is faulty.
Orange Steady on An alarm is generated when a high-speed interface card is incorrectly inserted into a low-speed interface card slot, or the board is not loaded with logic.
- Steady off The board is not registered or is not powered on.
SRV Service status indicator Green Steady on There is no CRC error alarm on the board.
Orange Steady on There is a CRC error alarm on the board.
- Off The board is not powered on or is faulty.
L/A (0–3) Interface status indicator Green Steady on The link is up.
Green Blinking Data is being transmitted or received.
- Steady off The link is down.

Ports

Table 1-890 Ports on the CR8D00E4YFC0
Port Connector Type Description Available Components
OUT0 IN0-OUT3 IN3 SFP28 Interface for inputting and outputting 25GE/10GE optical signals

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1.25/9.953/10.3125Gbps SFP+ Optical Module

1.25Gbps eSFP BIDI Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP Optical Module

10Gbps SFP+ BIDI Optical Module

10Gbps SFP+ CWDM Optical Module

10Gbps SFP+ Optical Module

125M~2.67Gbps eSFP DWDM Optical Module

1Gbps SyncE and 1588V2 Electrical Module

1Gbps Electrical Module

25Gbps SFP28 Optical Module

25Gbps SFP28 BIDI Optical Module
Table 1-891 Port attributes about the CR8D00E4YFC0
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP

Functions and Features

Table 1-892 Functions and features of the CR8D00E4YFC0
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides four 25GE/10GE interfaces for line-rate transmitting and receiving, and supports SFP28/SFP+ optical modules.

MACsec is supported.
Reliability and availability Hot swappable.
Restrictions and remarks By default, 25GE/10GE auto-negotiation is supported. You can run the port-mode group-id command in the slot view to switch the mode to 10GE/GE auto-negotiation.
Breakout supported No
Interface rate auto-sensing supported In 25GE mode, 10GE/25GE auto-sensing supported; In 10GE mode, GE/10GE auto-sensing supported.
FlexE supported No

Technical Specifications

Table 1-893 Technical specifications of the CR8D00E4YFC0
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.7 kg (1.54 lb)
Weight with packaging [kg(lb)] 1.1 kg (2.43 lb)
Typical power consumption [W] 25.3 W
Typical heat dissipation [BTU/hour] 82.15 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR8D00E8GEB2 (8-Port 100/1000Base-RJ45 Physical Interface Card(PIC))

Overview

Table 1-894 Basic information about the CR8D00E8GEB2
Item Details
Description 8-Port 100/1000Base-RJ45 Physical Interface Card(PIC)
Part Number 03034REJ
Model CR8D00E8GEB2
Card type Interface Card
Silkscreen 8xFE/GE-RJ

Appearance

Figure 1-179 Appearance of the CR8D00E8GEB2

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03034REJ&productModel=CR8D00E8GEB2#matchRelation

Indicators

Table 1-895 Indicators on the CR8D00E8GEB2
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working normally.
Red Steady on The board hardware is faulty.
Orange Steady on The interface board is not loaded with the logic.
- Off The board is not running or no power is input.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarms.
- Off The board is not running or no power is input.
LINK Port connection status indicator Green Steady on If the LINK indicator above each FE/GE electrical interface is steady green, the physical connection of the interface is normal.
LINK Connection status indicator - Off Indicates that the physical port fails to be connected.
ACT Port data transmit/receive status indicator Orange Blinking If the ACT indicator is blinking orange above each FE/GE electrical service port, the service port is receiving or transmitting data.
ACT Transmitting/receiving status indicator - Off The service port is not receiving or transmitting data.

Ports

Table 1-896 Ports on the CR8D00E8GEB2
Port Connector Type Description Available Components
FE/GE0 to FE/GE7 RJ45 GE/FE service signal input and output interface

Ethernet Cables
Table 1-897 Port attributes about the CR8D00E8GEB2
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, and Ethernet_SNAP

Functions and Features

Table 1-898 Functions and features of the CR8D00E8GEB2
Functions and Features Description
Basic function

Occupies one flexible interface board slot.

Provides eight GE/FE interfaces for line-rate transmitting and receiving, and supports 10M/100M/1000M electrical interfaces.

Supports MACsec.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-899 Technical specifications of the CR8D00E8GEB2
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.55 kg (1.21 lb)
Weight with packaging [kg(lb)] 0.89 kg (1.96 lb)
Typical power consumption [W] 12.33 W
Typical heat dissipation [BTU/hour] 40.00 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR8D00E8GEC1 (03033MNN: 8-Port 100/1000Base-RJ45 Physical Interface Card(PIC))

Overview

Table 1-900 Basic information about the CR8D00E8GEC1
Item Details
Description 8-Port 100/1000Base-RJ45 Physical Interface Card(PIC)
Part Number 03033MNN
Model CR8D00E8GEC1
Card type Interface Card
Silkscreen 8xFE/GE-RJ

Appearance

Figure 1-180 Appearance of the CR8D00E8GEC1

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033MNN&productModel=CR8D00E8GEC1#matchRelation

Indicators

Table 1-901 Indicators on the CR8D00E8GEC1
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working normally.
Red Steady on The board hardware is faulty.
Orange Steady on The interface board is not loaded with the logic.
- Off The board is not running or no power is input.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarms.
- Off The board is not running or no power is input.
LINK Port connection status indicator Green Steady on If the LINK indicator above each FE/GE electrical interface is steady green, the physical connection of the interface is normal.
LINK Connection status indicator - Off Indicates that the physical port fails to be connected.
ACT Port data transmit/receive status indicator Orange Blinking If the ACT indicator is blinking orange above each FE/GE electrical service port, the service port is receiving or transmitting data.
ACT Transmitting/receiving status indicator - Off The service port is not receiving or transmitting data.

Ports

Table 1-902 Ports on the CR8D00E8GEC1
Port Connector Type Description Available Components
FE/GE0 to FE/GE7 RJ45 GE/FE service signal input and output interface

Ethernet Cables
Table 1-903 Port attributes about the CR8D00E8GEC1
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, and Ethernet_SNAP

Functions and Features

Table 1-904 Functions and features of the CR8D00E8GEC1
Functions and Features Description
Basic function

Occupies one flexible interface board slot.

Provides eight GE/FE interfaces for line-rate transmitting and receiving, and supports 10M/100M/1000M electrical interfaces.

Supports MACsec.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-905 Technical specifications of the CR8D00E8GEC1
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.55 kg (1.21 lb)
Weight with packaging [kg(lb)] 0.89 kg (1.96 lb)
Typical power consumption [W] 12.33 W
Typical heat dissipation [BTU/hour] 40.00 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR8D00E8GEC1 (03033MNN-001: 8-Port 100/1000Base-RJ45 Physical Interface Card(PIC))

Overview

Table 1-906 Basic information about the CR8D00E8GEC1
Item Details
Description 8-Port 100/1000Base-RJ45 Physical Interface Card(PIC)
Part Number 03033MNN-001
Model CR8D00E8GEC1
Card type Interface Card
Silkscreen 8xFE/GE-RJ

Appearance

Figure 1-181 Appearance of the CR8D00E8GEC1

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033MNN-001&productModel=CR8D00E8GEC1#matchRelation

Indicators

Table 1-907 Indicators on the CR8D00E8GEC1
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working normally.
Red Steady on The board hardware is faulty.
Orange Steady on The interface board is not loaded with the logic.
- Off The board is not running or no power is input.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarms.
- Off The board is not running or no power is input.
LINK Port connection status indicator Green Steady on If the LINK indicator above each FE/GE electrical interface is steady green, the physical connection of the interface is normal.
LINK Connection status indicator - Off Indicates that the physical port fails to be connected.
ACT Port data transmit/receive status indicator Orange Blinking If the ACT indicator is blinking orange above each FE/GE electrical service port, the service port is receiving or transmitting data.
ACT Transmitting/receiving status indicator - Off The service port is not receiving or transmitting data.

Ports

Table 1-908 Ports on the CR8D00E8GEC1
Port Connector Type Description Available Components
FE/GE0 to FE/GE7 RJ45 GE/FE service signal input and output interface

Ethernet Cables
Table 1-909 Port attributes about the CR8D00E8GEC1
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, and Ethernet_SNAP

Functions and Features

Table 1-910 Functions and features of the CR8D00E8GEC1
Functions and Features Description
Basic function

Occupies one flexible interface board slot.

Provides eight GE/FE interfaces for line-rate transmitting and receiving, and supports 10M/100M/1000M electrical interfaces.

Supports MACsec.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-911 Technical specifications of the CR8D00E8GEC1
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.55 kg (1.21 lb)
Weight with packaging [kg(lb)] 0.89 kg (1.96 lb)
Typical power consumption [W] 12.33 W
Typical heat dissipation [BTU/hour] 40.00 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR8D00EAGFC3 (10-Port 100/1000Base-X-SFP Physical Interface Card(PIC))

Overview

Table 1-912 Basic information about the CR8D00EAGFC3
Item Details
Description 10-Port 100/1000Base-X-SFP Physical Interface Card(PIC)
Part Number 03034BAS
Model CR8D00EAGFC3
Card type Interface Card
Silkscreen 10xFE/GE-SFP

Appearance

Figure 1-182 Appearance of the CR8D00EAGFC3

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03034BAS&productModel=CR8D00EAGFC3#matchRelation

Indicators

Table 1-913 Indicators on the CR8D00EAGFC3
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarms.
- Off The board is not running or no power is input.
L/A (0 to 9) Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted or received.
- Off The link is Down.

Ports

Table 1-914 Ports on the CR8D00EAGFC3
Port Connector Type Description Available Components
OUT0 IN0-OUT9 IN9 SFP GE/FE service signal input and output interface

155Mbps SFP Electrical Module

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1Gbps Electrical Module

1.25Gbps eSFP Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP BIDI Optical Module

125M~2.67Gbps eSFP DWDM Optical Module
Table 1-915 Port attributes about the CR8D00EAGFC3
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-916 Functions and features of the CR8D00EAGFC3
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides 10 GE interfaces for line-rate transmitting and receiving, and supports SFP optical modules.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-917 Technical specifications of the CR8D00EAGFC3
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.6 kg (1.32 lb)
Weight with packaging [kg(lb)] 0.95 kg (2.09 lb)
Typical power consumption [W] 13.47 W
Typical heat dissipation [BTU/hour] 43.70 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR8D00EAGFCA (10-port 100/1000Base-X-SFP MACsec Physical Interface Card(PIC))

Overview

Table 1-918 Basic information about the CR8D00EAGFCA
Item Details
Description 10-port 100/1000Base-X-SFP MACsec Physical Interface Card(PIC)
Part Number 03034KEB
Model CR8D00EAGFCA
Card type Interface Card
Silkscreen 10xFE/GE-SFP

Appearance

Figure 1-183 Appearance of the CR8D00EAGFCA

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03034KEB&productModel=CR8D00EAGFCA#matchRelation

Indicators

Table 1-919 Indicators on the CR8D00EAGFCA
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The board hardware is faulty.
Orange Steady on An alarm is generated when a high-speed interface card is incorrectly inserted into a low-speed interface card slot, or the board is not loaded with logic.
- Steady off The board is not registered or is not powered on.
SRV Service status indicator Green Steady on There is no CRC error alarm on the board.
Orange Steady on There is a CRC error alarm on the board.
- Steady off The board is not powered on or is faulty.
L/A (0–9) Running status indicator Green Steady on The link is up.
Green Blinking Data is being transmitted or received.
- Steady off The link is down.

Ports

Table 1-920 Ports on the CR8D00EAGFCA
Port Connector Type Description Available Components
OUT0 IN0–OUT9 IN9 SFP GE/FE optical signal input/output port

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1Gbps Electrical Module

1.25Gbps eSFP Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP BIDI Optical Module

125M~2.67Gbps eSFP DWDM Optical Module
Table 1-921 Port attributes about the CR8D00EAGFCA
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP

Functions and Features

Table 1-922 Functions and features of the CR8D00EAGFCA
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides ten FE/GE interfaces for line-rate transmitting and receiving, and supports SFP optical modules.

Supports MACsec.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-923 Technical specifications of the CR8D00EAGFCA
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.7 kg (1.54 lb)
Weight with packaging [kg(lb)] 1.1 kg (2.43 lb)
Typical power consumption [W] 19.3 W
Typical heat dissipation [BTU/hour] 62.54 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR8D00EAXFC1 (03034KEC: 10-Port 10GE/GE LAN/WAN-SFP+ MACsec Physical Interface Card(PIC))

Overview

Table 1-924 Basic information about the CR8D00EAXFC1
Item Details
Description 10-Port 10GE/GE LAN/WAN-SFP+ MACsec Physical Interface Card(PIC)
Part Number 03034KEC
Model CR8D00EAXFC1
Card type Interface Card
Silkscreen 10x10GE-SFP+

Appearance

Figure 1-184 Appearance of the CR8D00EAXFC1

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03034KEC&productModel=CR8D00EAXFC1#matchRelation

Indicators

Table 1-925 Indicators on the CR8D00EAXFC1
Silkscreen Name Color Status Description
STAT Running status indicator Green Steady on The board is working properly.
Red Steady on The board hardware is faulty.
Orange Steady on An alarm is generated when a high-speed interface card is incorrectly inserted into a low-speed interface card slot, or the board is not loaded with logic.
- Steady off The board is not registered or is not powered on.
SRV Service status indicator Green Steady on There is no CRC error alarm on the board.
Orange Steady on There is a CRC error alarm on the board.
- Off The board is not powered on or is faulty.
L/A (0–9) Interface status indicator Green Steady on The link is up.
Green Blinking Data is being transmitted or received.
- Steady off The link is down.

Ports

Table 1-926 Ports on the CR8D00EAXFC1
Port Connector Type Description Available Components
OUT0 IN0-OUT9 IN9 SFP+ Interface for 10GE optical signal input and output

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1.25/9.953/10.3125Gbps SFP+ Optical Module

1.25Gbps eSFP BIDI Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP Optical Module

10Gbps SFP+ BIDI Optical Module

10Gbps SFP+ CWDM Optical Module

10Gbps SFP+ Optical Module

125M~2.67Gbps eSFP DWDM Optical Module

1Gbps SyncE and 1588V2 Electrical Module

1Gbps Electrical Module
Table 1-927 Port attributes about the CR8D00EAXFC1
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP

Functions and Features

Table 1-928 Functions and features of the CR8D00EAXFC1
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides ten 10GE/GE interfaces for line-rate transmitting and receiving, and supports SFP+/SFP optical modules.

Supports MACsec.
Reliability and availability Hot swappable.
Restrictions and remarks Ports 2–5 belong to a port group, and ports 6–9 belong to another one. In LAN/WAN switching, the mode of ports in a port group must be switched at the same time.
Breakout supported No
Interface rate auto-sensing supported Supports GE/10GE auto-sensing.
FlexE supported No

Technical Specifications

Table 1-929 Technical specifications of the CR8D00EAXFC1
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.2 kg (2.65 lb)
Typical power consumption [W] 32.6 W
Typical heat dissipation [BTU/hour] 105.8 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR8D00EAXFC1 (03035JVG: 10-Port 10GE/GE LAN/WAN-SFP+ MACsec Physical Interface Card(PIC) for SME)

Overview

Table 1-930 Basic information about the CR8D00EAXFC1
Item Details
Description 10-Port 10GE/GE LAN/WAN-SFP+ MACsec Physical Interface Card(PIC) for SME
Part Number 03035JVG
Model CR8D00EAXFC1
Card type Interface Card
Silkscreen 10x10GE-SFP+

Appearance

Figure 1-185 Appearance of the CR8D00EAXFC1

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03035JVG&productModel=CR8D00EAXFC1#matchRelation

Indicators

Table 1-931 Indicators on the CR8D00EAXFC1
Silkscreen Name Color Status Description
STAT Running status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on An alarm is generated when a high-speed interface card is incorrectly inserted into a low-speed interface card slot, or the board is not loaded with logic.
- Steady off The board is not powered on or is not registered.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarms.
- Off The board is not powered on or is faulty.
L/A (0–9) Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted and received.
- Steady off The link is Down.

Ports

Table 1-932 Ports on the CR8D00EAXFC1
Port Connector Type Description Available Components
OUT0 IN0-OUT9 IN9 SFP+ 10GE/GE optical signal input and output interface

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1.25/9.953/10.3125Gbps SFP+ Optical Module

1.25Gbps eSFP BIDI Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP Optical Module

10Gbps SFP+ BIDI Optical Module

10Gbps SFP+ CWDM Optical Module

10Gbps SFP+ Optical Module

125M~2.67Gbps eSFP DWDM Optical Module

1Gbps SyncE and 1588V2 Electrical Module

1Gbps Electrical Module
Table 1-933 Port attributes about the CR8D00EAXFC1
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP

Functions and Features

Table 1-934 Functions and features of the CR8D00EAXFC1
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides ten 10GE/GE interfaces for line-rate transmitting and receiving, and supports SFP+/SFP optical modules.

Supports MACsec.
Reliability and availability Hot swappable
Restrictions and remarks Ports 2–5 belong to a port group, and ports 6–9 belong to another one. In LAN/WAN switching, the mode of ports in a port group must be switched at the same time.
Breakout supported No
Interface rate auto-sensing supported Supports GE/10GE auto-sensing.
FlexE supported No

Technical Specifications

Table 1-935 Technical specifications of the CR8D00EAXFC1
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.2 kg (2.65 lb)
Typical power consumption [W] 32.6 W
Typical heat dissipation [BTU/hour] 105.8 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR8D00EEGFXA (20-Port 100/1000Base-X-CSFP/10-Port 100/1000Base-X-SFP Physical Interface Card(PIC))

Overview

Table 1-936 Basic information about the CR8D00EEGFXA
Item Details
Description 20-Port 100/1000Base-X-CSFP/10-Port 100/1000Base-X-SFP Physical Interface Card(PIC)
Part Number 03034QXF
Model CR8D00EEGFXA
Card type Interface Card
Silkscreen 20xGE-CSFP

Appearance

Figure 1-186 Appearance of the CR8D00EEGFXA

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03034QXF&productModel=CR8D00EEGFXA#matchRelation

Indicators

Table 1-937 Indicators on the CR8D00EEGFXA
Silkscreen Name Color Status Description
STAT Running status indicator Green Steady on The board is working properly.
Red Steady on The board hardware is faulty.
Orange Steady on An alarm is generated when a high-speed interface card is incorrectly inserted into a low-speed interface card slot, or the board is not loaded with logic.
- Steady off The board is not registered or is not powered on.
OUT0 IN0 to OUT19 IN19 Interface status indicator Green Steady on The link is up.
Green Blinking Data is being transmitted or received.
- Steady off The link is down.
SRV Service status indicator Green Steady on There is no CRC error alarm on the board.
Orange Steady on There is a CRC error alarm on the board.
- Off The board is not powered on or is faulty.

Ports

Table 1-938 Ports on the CR8D00EEGFXA
Port Connector Type Description Available Components
OUT0 IN0-OUT19 IN19 CSFP/SFP GE/FE optical signal input/output port

1.25Gbps eSFP Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP BIDI Optical Module

1.25Gbps CSFP BIDI Optical Module

125M~1.25Gbps CSFP BIDI Optical Module

125M~2.67Gbps eSFP DWDM Optical Module

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1Gbps Electrical Module
Table 1-939 Port attributes about the CR8D00EEGFXA
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP

Functions and Features

Table 1-940 Functions and features of the CR8D00EEGFXA
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides 20 GE interfaces for line-rate transmitting and receiving, and supports CSFP optical modules on interfaces 0 to 19.

Provides 10 GE interfaces for line-rate transmitting and receiving, and supports SFP modules on even-numbered interfaces (0, 2, 4, ..., 18).

Supports CSFP and SFP modules used separately and in combination.

Supports MACsec.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-941 Technical specifications of the CR8D00EEGFXA
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.3 kg (2.87 lb)
Typical power consumption [W] 32.2 W
Typical heat dissipation [BTU/hour] 104.34 BTU/hour
Long-term operating temperature [°C(°F)] –20°C to +65°C (–4°F to +149°F)

CR8D00L4XFC1 (4-Port 10G-SFP+ Physical Interface Card(PIC))

Overview

Table 1-942 Basic information about the CR8D00L4XFC1
Item Details
Description 4-Port 10G-SFP+ Physical Interface Card(PIC)
Part Number 03033VMB
Model CR8D00L4XFC1
Card type Interface Card
Silkscreen 4x10GE-SFP+

Appearance

Figure 1-187 Appearance of the CR8D00L4XFC1

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033VMB&productModel=CR8D00L4XFC1#matchRelation

Indicators

Table 1-943 Indicators on the CR8D00L4XFC1
Silkscreen Name Color Status Description
STAT Board status indicator Green Steady on The board is working normally.
Red Steady on The board hardware is faulty.
Orange Steady on The board is not loaded with the logic.
- Off The board is not running or no power is input.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarms.
- Off The board is not running or no power is input.
L/A 0 to 3 Port connection/data transceiving status indicator Green Steady on The service port is properly connected to an optical fiber or cable.
Orange or green Blinking The service port is properly connected to the optical fiber or cable, and the port is receiving or transmitting data.
- Off The connection between the service port and the optical fiber or cable fails.

Ports

Table 1-944 Ports on the CR8D00L4XFC1
Port Connector Type Description Available Components
OUT0 IN0 to OUT3 IN3 SFP+ 10GE service signal input and output interface

10Gbps SFP+ Optical Module

10Gbps SFP+ BIDI Optical Module

10Gbps SFP+ CWDM Optical Module
Table 1-945 Port attributes about the CR8D00L4XFC1
Attributes Details
Working mode Full-duplex
Standards compliance Supports Ethernet IEEE 802.3 standard network protocol

Functions and Features

Table 1-946 Functions and features of the CR8D00L4XFC1
Functions and Features Description
Basic function

Occupies one flexible interface board slot.

Provides four 10GE interfaces for line-rate transmitting and receiving, and supports SFP+ optical modules.
Reliability and availability Hot swappable.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No

Technical Specifications

Table 1-947 Technical specifications of the CR8D00L4XFC1
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.6 kg (1.32 lb)
Weight with packaging [kg(lb)] 1.0 kg (2.2 lb)
Typical power consumption [W] 14.27 W
Typical heat dissipation [BTU/hour] 46.30 BTU/hour
Long-term operating temperature [°C(°F)] –20°C to +65°C (–4°F to +149°F)

CR8D00L8YFC1 (8-Port 25GE(SFP28)/10GE(SFP+) MACsec Physical Interface Card (PIC))

Overview

Table 1-948 Basic information about the CR8D00L8YFC1
Item Details
Description 8-Port 25GE(SFP28)/10GE(SFP+) MACsec Physical Interface Card (PIC)
Part Number 03034SUP
Model CR8D00L8YFC1
Card type Interface Card
Silkscreen 8x25GE-SFP28

Appearance

Figure 1-188 Appearance of the CR8D00L8YFC1

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03034SUP&productModel=CR8D00L8YFC1#matchRelation

Indicators

Table 1-949 Indicators on the CR8D00L8YFC1
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The board hardware is faulty.
Orange Steady on An alarm is generated when a high-speed interface card is incorrectly inserted into a low-speed interface card slot, or the board is not loaded with logic.
- Off The board is not registered or is not powered on.
SRV Service status indicator Green Steady on There is no CRC error alarm on the board.
Orange Steady on There is a CRC error alarm on the board.
- Off The board is not powered on or is faulty.
L/A (0–7) Running status indicator Green Steady on The link is up.
Green Blinking Data is being transmitted or received.
- Off The link is down.

Ports

Table 1-950 Ports on the CR8D00L8YFC1
Port Connector Type Description Available Components
OUT0 IN0–OUT7 IN7 SFP28 Interface for inputting and outputting 25GE/10GE optical signals

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1.25/9.953/10.3125Gbps SFP+ Optical Module

1.25Gbps eSFP BIDI Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP Optical Module

10Gbps SFP+ BIDI Optical Module

10Gbps SFP+ CWDM Optical Module

10Gbps SFP+ Optical Module

125M~2.67Gbps eSFP DWDM Optical Module

1Gbps Electrical Module

25Gbps SFP28 Optical Module
Table 1-951 Port attributes about the CR8D00L8YFC1
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP

Functions and Features

Table 1-952 Functions and features of the CR8D00L8YFC1
Functions and Features Description
Basic function

Provides eight 25GE/10GE ports to transmit and receive optical signals.

Supports MACsec.
Reliability and availability Hot swappable.
Restrictions and remarks Ports 0 to 3 belong to a port group, and ports 4 to 7 belong to another one. By default, 25GE/10GE auto-negotiation is supported. You can run the port-mode group-id command in the slot view to switch the mode of a port group to 10GE/GE auto-negotiation. In LAN/WAN switching, the mode of ports in a port group must be switched at the same time.
Breakout supported No
Interface rate auto-sensing supported In 25GE mode, 10GE/25GE auto-sensing supported; In 10GE mode, GE/10GE auto-sensing supported.
FlexE supported No

Technical Specifications

Table 1-953 Technical specifications of the CR8D00L8YFC1
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.2 kg (2.65 lb)
Typical power consumption [W] 37.5 W
Typical heat dissipation [BTU/hour] 121.57 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR8D00P8CFC1 (8-Port STM-1c/8-Port STM-4c POS Card (PIC)(Default Enable 4*STM-1c))

Overview

Table 1-954 Basic information about the CR8D00P8CFC1
Item Details
Description 8-Port STM-1c/8-Port STM-4c POS Card (PIC)(Default Enable 4*STM-1c)
Part Number 03033YLL
Model CR8D00P8CFC1
Card type Interface Card
Silkscreen 8xSTM1/8xSTM4-POS

Appearance

Figure 1-189 Appearance of the CR8D00P8CFC1

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033YLL&productModel=CR8D00P8CFC1#matchRelation

Indicators

Table 1-955 Indicators on the CR8D00P8CFC1
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working normally.
Red Steady on The board hardware is faulty.
Orange Steady on The interface board is not loaded with the logic.
- Off The board is not running or no power is input.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarms.
- Steady off The board is not powered on or is faulty.
L/A (0–7) Running status indicator Green Steady on The link is Up.
L/A(0-7) Green Blinking Data is being transmitted and received.
- Steady off The link is Down.

Ports

Table 1-956 Ports on the CR8D00P8CFC1
Port Connector Type Description Available Components
OUT0 IN0 to OUT7 IN7 SFP Interface for inputting and outputting STM-1/STM-4/STM-16 optical signals

155Mbps SFP Electrical Module

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

622Mbps eSFP Optical Module

2.5Gbps eSFP Optical Module
Table 1-957 Port attributes about the CR8D00P8CFC1
Attributes Details
Working mode Full-duplex
Standards compliance ITU-T G707
Frame format PPP, HDLC

Functions and Features

Table 1-958 Functions and features of the CR8D00P8CFC1
Functions and Features Description
Basic function

Provides eight 155 Mbit/s or 622 Mbit/s POS interfaces. From V800R023C00, the first four ports support the 2.5G POS mode.

The port mode can be switched among 8 x 155M, 8 x 622M, and 4 x 2.5G using the set service mode command.
Reliability and availability Hot swappable.
Restrictions and remarks

1. Ports 0–7 support the master clock mode, and ports 0–3 support the slave clock mode.

2. A subcard supports only one of the three modes. To switch the mode, all interfaces must switch the mode at the same time.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported No
Link protocol PPP,HDLC

Technical Specifications

Table 1-959 Technical specifications of the CR8D00P8CFC1
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.7 kg (1.54 lb)
Weight with packaging [kg(lb)] 1.1 kg (2.43 lb)
Typical power consumption [W] 24.79 W
Typical heat dissipation [BTU/hour] 80.43 BTU/hour
Long-term operating temperature [°C(°F)] –20°C to +65°C (–4°F to +149°F)

CR8DE1KB00M1 (1-Port 400GBase-QSFP-DD Single-layer Physical Interface Card(PIC))

Overview

Table 1-960 Basic information about the CR8DE1KB00M1
Item Details
Description 1-Port 400GBase-QSFP-DD Single-layer Physical Interface Card(PIC)
Part Number 03034YNM
Model CR8DE1KB00M1
Card type Interface Card
Silkscreen 1x400GE-QSFPDD

Appearance

Figure 1-190 Appearance of the CR8DE1KB00M1

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03034YNM&productModel=CR8DE1KB00M1#matchRelation

Indicators and Buttons

Table 1-961 Indicators on the CR8DE1KB00M1
Silkscreen Name Color Status Description
STAT Running status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarm.
- Off The board is not running or no power is input.
L0 Optical Amplifier running status indicator Green Steady on The Optical Amplifier port works normally and there is no LOS.
- Off The Optical Amplifier port does not work normally or LOS occurs.
L/A1 Port running status indicator Green Steady on The link is Up.
Green Blink Data is being transmitted or received.
- Off The link is Down.
BREAKOUT (0–7) Breakout channel indicator Green Steady on Breakout 0–7: breakout indicators. If breakout indicator X is on, the port indicators are showing the running status of breakout channel X. For example, if breakout indicator 0 is on, port indicators are showing the running status of breakout channel 0 (if a port indicator is blinking, breakout channel 0 on this port is receiving and transmitting data); if breakout indicator 1 is on, port indicators are showing the running status of breakout channel 1. If the breakout indicators 0 to 7 are off, the board has no breakout ports. If the board has breakout ports, each breakout indicator for channels 0 to 7 turns on for 5 seconds in sequence to indicate the status of the corresponding channel. To rapidly identify the running status of a specific breakout channel, press the Breakout button to switch to your desired indicator. For example, if you want to check the running status of breakout channel 1 on each port, press the Breakout button to have breakout indicator 1 turn on.
Table 1-962 Buttons on the CR8DE1KB00M1
Silkscreen Name Description
BREAKOUT Breakout button When you press the button, the Breakout indicators stop status cycling and remain in the current status. Then, each time you press the button, the Breakout indicators' status switches. If you do not press the button in 60s, the Breakout indicators automatically start status cycling.

Ports

Table 1-963 Ports on the CR8DE1KB00M1
Port Connector Type Description Available Components
OUT0 IN0 QSFP28 Optical Amplifier Module

Optical Amplifier Module
OUT1 IN1 QSFP-DD Inputs and outputs 400GE optical signals.

400Gbps QSFP-DD Optical Module

100Gbps QSFP28 Optical Module
Table 1-964 Port attributes about the CR8DE1KB00M1
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-965 Functions and features of the CR8DE1KB00M1
Functions and Features Description
Basic function

The line side of the board provides one 400GE QSFP-DD interface and one QSFP28 optical amplifier interface.

1. The rate of the QSFP-DD interface is 400 Gbit/s.

2. The QSFP28 fiber amplifier interface supports the fiber amplifier module (reserved).

The FlexE feature is supported.
Reliability and availability Hot swappable.
Restrictions and remarks

1. QSFP-DD supports 400G QSFP-DD optical modules by default. You need to run the port split command in the system view to switch QSFP-DD optical modules to 100G QSFP28 optical modules.

2. When the board is used with a 400G ZR+ optical module, the operating temperature supported by the optical module ranges from –5°C to 48°C. When the board is used with a 400G ZR/ER optical module, the operating temperature supported by the optical module ranges from –5°C to 50°C.
Breakout supported

Yes.

To enable the breakout function on a port, run the port split command.
Interface rate auto-sensing supported No
FlexE supported

Yes

Ports on straight-through cards can be bonded to form a group. Physical port 1 can be added to a group. port-id ranges from 1000 to 3000. A maximum of 80 FlexE clients can be created.

Technical Specifications

Table 1-966 Technical specifications of the CR8DE1KB00M1
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.3 kg (2.87 lb)
Typical power consumption [W] 59 W
Typical heat dissipation [BTU/hour] 191.29 BTU/hour
Long-term operating temperature [°C(°F)] –5°C to +55°C (23°F to 131°F)

CR8DE1KB00M2 (1-Port 400GBase-QSFP-DD Single-layer Physical Interface Card CM(Enable 1*100G)(PIC))

Overview

Table 1-967 Basic information about the CR8DE1KB00M2
Item Details
Description 1-Port 400GBase-QSFP-DD Single-layer Physical Interface Card CM(Enable 1*100G)(PIC)
Part Number 03035EXD
Model CR8DE1KB00M2
Card type Interface Card
Silkscreen 1x400GE-QSFPDD

Appearance

Figure 1-191 Appearance of the CR8DE1KB00M2

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03035EXD&productModel=CR8DE1KB00M2#matchRelation

Indicators and Buttons

Table 1-968 Indicators on the CR8DE1KB00M2
Silkscreen Name Color Status Description
STAT Running status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on An alarm is generated when a high-speed interface card is incorrectly inserted into a low-speed interface card slot, or the board is not loaded with logic.
- Steady off The board is not powered on or is not registered.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarms.
- Off The board is not powered on or is faulty.
L0 Optical Amplifier running status indicator Green Steady on The Optical Amplifier port works normally and there is no LOS.
- Off The Optical Amplifier port does not work normally or LOS occurs.
L/A1 Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted and received.
- Steady off The link is Down.
BREAKOUT (0–7) Breakout indicator Green Steady on Breakout 0–7: breakout indicators. If breakout indicator X is on, the port indicators are showing the running status of breakout channel X. For example, if breakout indicator 0 is on, port indicators are showing the running status of breakout channel 0 (if a port indicator is blinking, breakout channel 0 on this port is receiving and transmitting data); if breakout indicator 1 is on, port indicators are showing the running status of breakout channel 1. If the breakout indicators 0 to 7 are off, the board has no breakout ports. If the board has breakout ports, each breakout indicator for channels 0 to 7 turns on for 5 seconds in sequence to indicate the status of the corresponding channel. To rapidly identify the running status of a specific breakout channel, press the Breakout button to switch to your desired indicator. For example, if you want to check the running status of breakout channel 1 on each port, press the Breakout button to have breakout indicator 1 turn on.
Table 1-969 Buttons on the CR8DE1KB00M2
Silkscreen Name Description
BREAKOUT Interface splitting button When you press the button, the breakout indicators stop status cycling and remain in the current status. Then, each time you press the button, the breakout indicators' status switches. If you do not press the button in 60 seconds, the indicators automatically start status cycling.

Ports

Table 1-970 Ports on the CR8DE1KB00M2
Port Connector Type Description Available Components
OUT0 IN0 QSFP28 Optical Amplifier Module

Optical Amplifier Module
OUT1 IN1 QSFP-DD Interface for inputting and outputting 400GE optical signals

400Gbps QSFP-DD Optical Module

100Gbps QSFP28 Optical Module
Table 1-971 Port attributes about the CR8DE1KB00M2
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP

Functions and Features

Table 1-972 Functions and features of the CR8DE1KB00M2
Functions and Features Description
Basic function

The line side of the board provides one 400GE QSFP-DD interface and one QSFP28 optical amplifier interface.

1. The default rate of a QSFP-DD port is 100 Gbit/s. The initial 100G capability can be upgraded to 200G/400G through the 50G RTU.

2. The QSFP28 fiber amplifier interface supports the fiber amplifier module (reserved).

The FlexE feature is supported.
Reliability and availability Hot swappable
Restrictions and remarks

1. QSFP-DD supports 400G QSFP-DD optical modules by default. You need to run the port split command in the system view to switch QSFP-DD optical modules to 100G QSFP28 optical modules.

2. When the board is used with a 400G ZR+ optical module, the operating temperature supported by the optical module ranges from –5°C to 48°C. When the board is used with a 400G ZR/ER optical module, the operating temperature supported by the optical module ranges from –5°C to 50°C.
Breakout supported

Yes.

To enable the breakout function on a port, run the port split command.
Interface rate auto-sensing supported No
FlexE supported

Yes

Ports on straight-through cards can be bonded to form a group. Physical port 1 can be added to a group. port-id ranges from 1000 to 3000. A maximum of 80 FlexE clients can be created.

Technical Specifications

Table 1-973 Technical specifications of the CR8DE1KB00M2
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.3 kg (2.87 lb)
Typical power consumption [W] 59 W
Typical heat dissipation [BTU/hour] 191.29 BTU/hour
Long-term operating temperature [°C(°F)] –5°C to +55°C (23°F to 131°F)

CR8DE1N8XFM0 (1-Port 100GBase/50GBase-QSFP28 FlexE MACsec+8-Port 10GE(SFP+)/GE(SFP) MACsec Physical Interface Card(PIC))

Overview

Table 1-974 Basic information about the CR8DE1N8XFM0
Item Details
Description 1-Port 100GBase/50GBase-QSFP28 FlexE MACsec+8-Port 10GE(SFP+)/GE(SFP) MACsec Physical Interface Card(PIC)
Part Number 03034XQW
Model CR8DE1N8XFM0
Card type Interface Card
Silkscreen 1x100G-QSFP28+8x10GE-SFP+

Appearance

Figure 1-192 Appearance of the CR8DE1N8XFM0

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03034XQW&productModel=CR8DE1N8XFM0#matchRelation

Indicators

Table 1-975 Indicators on the CR8DE1N8XFM0
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on An alarm is generated when a high-speed interface card is incorrectly inserted into a low-speed interface card slot, or the board is not loaded with logic.
- Steady off The board is not powered on or is not registered.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarms.
- Steady off The board is not powered on or is faulty.
L/A(0 to 8) Running status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted and received.
- Steady off The link is Down.
BREAKOUT (0–3) Breakout channel indicator Green Blinking Each indicator for channels 0, 1, 2, and 3 turns on for 5s in sequence to indicate the status of the corresponding channel. This process repeats.
- Steady off No data is transmitting or receiving in this channel.

Ports

Table 1-976 Ports on the CR8DE1N8XFM0
Port Connector Type Description Available Components
OUT0 IN0 QSFP28 Interface for inputting and outputting 50GE/100GE optical signals

100Gbps QSFP28 Optical Module

40Gbps QSFP+ Optical Module

50Gbps QSFP28 BIDI Optical Module

50Gbps QSFP28 Optical Module

Optical Amplifier Module
OUT1 IN1-OUT8 IN8 SFP+ 10GE/GE optical signal input and output interface

155Mbps eSFP Optical Module

155Mbps eSFP BIDI Optical Module

1.25/9.953/10.3125Gbps SFP+ Optical Module

1.25Gbps eSFP BIDI Optical Module

1.25Gbps eSFP CWDM Optical Module

1.25Gbps eSFP Optical Module

10Gbps SFP+ BIDI Optical Module

10Gbps SFP+ CWDM Optical Module

10Gbps SFP+ Optical Module

125M~2.67Gbps eSFP DWDM Optical Module

1Gbps Electrical Module
Table 1-977 Port attributes about the CR8DE1N8XFM0
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP, Ethernet_SNAP

Functions and Features

Table 1-978 Functions and features of the CR8DE1N8XFM0
Functions and Features Description
Basic function

Occupies one flexible card slot.

Provides one 100GE/50GE interface for line-rate transmitting and receiving (using QSFP28 optical modules) and eight 10GE/GE interfaces for line-rate transmitting and receiving (using SFP+/SFP optical modules).

Supports MACsec.
Reliability and availability Hot swappable
Restrictions and remarks

8 x 10G ports:

Ports 1 to 4 form a group, and ports 5 to 8 form another group. To switch between LAN and WAN, all ports in a group must be switched at the same time.
Breakout supported

Yes.

To enable the breakout function on a port, run the port split command.
Interface rate auto-sensing supported SFP+ ports support GE/10GE auto-sensing. QSFP28 ports support 40GE/50GE/100GE auto-sensing.
FlexE supported

Yes

Physical port 0 can be added to the one group. port-id ranges from 1000 to 3000. A maximum of 20 FlexE clients can be created.

Technical Specifications

Table 1-979 Technical specifications of the CR8DE1N8XFM0
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.8 kg (1.76 lb)
Weight with packaging [kg(lb)] 1.2 kg (2.65 lb)
Typical power consumption [W] 65.6 W
Typical heat dissipation [BTU/hour] 212.83 BTU/hour
Long-term operating temperature [°C(°F)] –40°C to +65°C (–40°F to +149°F)

CR8DE1NE2VC1 (2-Port 50GBase/1-Port 100GBase-QSFP28 Physical Interface Card(PIC))

Overview

Table 1-980 Basic information about the CR8DE1NE2VC1
Item Details
Description 2-Port 50GBase/1-Port 100GBase-QSFP28 Physical Interface Card(PIC)
Part Number 03033VMC
Model CR8DE1NE2VC1
Card type Interface Card
Silkscreen 2x50GE-QSFP28

Appearance

Figure 1-193 Appearance of the CR8DE1NE2VC1

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03033VMC&productModel=CR8DE1NE2VC1#matchRelation

Indicators

Table 1-981 Indicators on the CR8DE1NE2VC1
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
SRV Service Status Indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarm.
- Off The board is not running or no power is input.
L/A (0–1) Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted or received.
- Off The link is Down.
BREAKOUT (0–3) Breakout channel indicator Green Blink Each indicator for channels 0, 1, 2, and 3 turns on for 5s in sequence to indicate the status of the corresponding channel. This process repeats.
- Off No data is transmitting or receiving in this channel.

Ports

Table 1-982 Ports on the CR8DE1NE2VC1
Port Connector Type Description Available Components
OUT0 IN0 to OUT1 IN1 QSFP28 100GE/50GE service signal input and output interface

100Gbps QSFP28 Optical Module

50Gbps QSFP28 BIDI Optical Module

50Gbps QSFP28 Optical Module

40Gbps QSFP+ Optical Module

Optical Amplifier Module
Table 1-983 Port attributes about the CR8DE1NE2VC1
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-984 Functions and features of the CR8DE1NE2VC1
Functions and Features Description
Basic function

Occupies one flexible interface board slot.

Provides two 50GE interfaces or one 100GE interface for line-rate transmitting and receiving, and supports QSFP28 optical modules.

Supports FlexE.
Reliability and availability Hot swappable.
Restrictions and remarks

Port 0 supports 100GE, 50GE, 40GE, 4x25GE breakout, and 4x10GE breakout. Port 1 is valid only when port 0 is a 50GE port.

If the switch-mode command is set to auto and port 0 has a 100GE optical module or a 40GE optical module installed, the port automatically works in 100GE/40GE mode. In this case, port 0 takes effect, but port 1 does not take effect. If a 50GE optical module is inserted into port 0, ports 0 and 1 are both valid, and port 0 works in 50GE mode through auto-sensing. If port 1 works in 50GE mode and services are running on port 1, port 0 does not support auto-sensing.
Breakout supported

Yes.

To enable the breakout function on a port, run the port split command.
Interface rate auto-sensing supported Supports 40GE/50GE/100GE auto-sensing.
FlexE supported

Yes

On the NetEngine 8000 M14, NetEngine 8000E M14, NE40E-X2-M14 and PTN 6900-2-M14:

1. When IPUs such as CR5D0IPU2TC1, CR5D0IPU2TC2, CR5DIPU1T2C3, CR5DIPU1T2C4, CR5D0IPU2TC3, CR5DIPU1T2C1, CR5D0IPU2TC5, CR5DIPU1T2C5, CR5D0IPU2T91, CR5DIPU1T292, CR8D0IPU2TC1, CR8D0IPU2TC2, CR8DIPU1T2C3, CR8DIPU1T2C4, CR8D0IPU2TC3, CR8D0IPU2TC4, CR8DIPU1T2C7, CR8DIPU1T2C8, CR8D0IPU2TC5, CR8DIPU1T2CJ, CR8D0IPU2TD2, CR8D0IPU2TM1, CR8DIPU1T2M6, CR8D0IPU2TM2, CR8D0IPU2TM3, CR8DIPU1T2M9, TNRDIPU1T2C3, TNRD0IPU2TC1, TNRD0IPU2TC2, TNRDIPU1T2C4, TNRD0IPU2T90 and TNRDIPU1T292 are used, slots 7 to 14 support FlexE, and other slots do not support FlexE.

2. When IPUs such as CR5DIPU1T2CA, CR5DIPU1T2CB, CR5DIPU1T291, CR8DIPU1T2C5, CR8DIPU1T2C6, CR8DIPU1T2C9, CR8DIPU1T2CA, CR8DIPU1T2CD, CR8DIPU1T2CE, CR8DIPU1T2M0, CR8DIPU1T2CN, CR8DIPU1T2M3, CR8DIPU1T2M2, CR8DIPU1T2MK, CR8DIPU1T2ME, CR8DIPU1T2MS, TNRDIPU1T2C5 and TNRDIPU1T290 are used, slots 3 to 10 support FlexE, and other slots do not support FlexE.

Ports on straight-through cards can be bound to form a group. The port ID ranges from 0 to 47 and 1000 to 3000. A maximum of 48 FlexE clients can be created.

Technical Specifications

Table 1-985 Technical specifications of the CR8DE1NE2VC1
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.62 kg (1.37 lb)
Weight with packaging [kg(lb)] 0.96 kg (2.12 lb)
Typical power consumption [W] 23.13 W
Typical heat dissipation [BTU/hour] 75.04 BTU/hour
Long-term operating temperature [°C(°F)] –5°C to +55°C (23°F to 131°F)

CR8DE1NEKB11 (1-Port 400GBase-QSFP-DD Physical Interface Card CM(Enable 1*100G)(PIC))

Overview

Table 1-986 Basic information about the CR8DE1NEKB11
Item Details
Description 1-Port 400GBase-QSFP-DD Physical Interface Card CM(Enable 1*100G)(PIC)
Part Number 03034EDT
Model CR8DE1NEKB11
Card type Interface Card
Silkscreen 1x400GE-QSFP-DD

Appearance

Figure 1-194 Appearance of the CR8DE1NEKB11

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03034EDT&productModel=CR8DE1NEKB11#matchRelation

Indicators and Buttons

Table 1-987 Indicators on the CR8DE1NEKB11
Silkscreen Name Color Status Description
STAT Running status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
SRV Service status indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarm.
- Off The board is not running or no power is input.
L0 Optical Amplifier running status indicator Green Steady on The Optical Amplifier port works normally and there is no LOS.
- Off The Optical Amplifier port does not work normally or LOS occurs.
L/A1 Port running status indicator Green Steady on The link is Up.
Green Blink Data is being transmitted or received.
- Off The link is Down.
Breakout(0 to 7) Breakout channel indicator Green Steady on Breakout 0–7: breakout indicators. If breakout indicator X is on, the port indicators are showing the running status of breakout channel X. For example, if breakout indicator 0 is on, port indicators are showing the running status of breakout channel 0 (if a port indicator is blinking, breakout channel 0 on this port is receiving and transmitting data); if breakout indicator 1 is on, port indicators are showing the running status of breakout channel 1. If the breakout indicators 0 to 7 are off, the board has no breakout ports. If the board has breakout ports, each breakout indicator for channels 0 to 7 turns on for 5 seconds in sequence to indicate the status of the corresponding channel. To rapidly identify the running status of a specific breakout channel, press the Breakout button to switch to your desired indicator. For example, if you want to check the running status of breakout channel 1 on each port, press the Breakout button to have breakout indicator 1 turn on.
Table 1-988 Buttons on the CR8DE1NEKB11
Silkscreen Name Description
Breakout Breakout button When you press the button, the Breakout indicators stop status cycling and remain in the current status. Then, each time you press the button, the Breakout indicators' status switches. If you do not press the button in 60s, the Breakout indicators automatically start status cycling.

Ports

Table 1-989 Ports on the CR8DE1NEKB11
Port Connector Type Description Available Components
OUT0 IN0 QSFP28 Fiber amplifier interface (supported since V800R021C10)

Optical Amplifier Module
OUT1 IN1 QSFP-DD Inputs and outputs 400GE optical signals.

400Gbps QSFP-DD Optical Module

100Gbps QSFP28 Optical Module
Table 1-990 Port attributes about the CR8DE1NEKB11
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-991 Functions and features of the CR8DE1NEKB11
Functions and Features Description
Basic function

Occupies two flexible card slots. The line side of the board provides one 400GE QSFP-DD interface and one QSFP28 optical amplifier interface.

1. The default rate of a QSFP-DD port is 100 Gbit/s.The initial 100G capability can be upgraded to 200G/400G through 50G RTU.

2. The QSFP28 fiber amplifier interface supports the fiber amplifier module (reserved).

Supports FlexE.
Reliability and availability Hot swappable.
Restrictions and remarks

1. By default, a QSFP-DD port supports 400G QSFP-DD optical modules. To enable a QSFP-DD port to support 100G QSFP28 optical modules instead, run the port split command in the system view.

2. When the board works with a 400G ZR+ optical module, the short-term operating temperature supported by the optical module ranges from –5°C to +50°C.
Breakout supported No
Interface rate auto-sensing supported No
FlexE supported

Yes

Ports on the straight-through card can be bonded to form a group. port-id ranges from 1000 to 3000. A maximum of 48 FlexE clients can be created.

Technical Specifications

Table 1-992 Technical specifications of the CR8DE1NEKB11
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 40.14 mm x 193.8 mm x 209.3 mm (1.58 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 115 mm x 317.5 mm x 305 mm (4.53 in. x 12.50 in. x 12.01 in.)
Weight without packaging [kg(lb)] 1.1 kg (2.43 lb)
Weight with packaging [kg(lb)] 1.7 kg (3.75 lb)
Typical power consumption [W] 69.8 W
Typical heat dissipation [BTU/hour] 226.34 BTU/hour
Long-term operating temperature [°C(°F)] –5°C to +55°C (23°F to 131°F)

CR8DE2NB00M0 (2-Port 100GBase/50GBase-QSFP28 Interface Card(PIC))

Overview

Table 1-993 Basic information about the CR8DE2NB00M0
Item Details
Description 2-Port 100GBase/50GBase-QSFP28 Interface Card(PIC)
Part Number 03035FBD
Model CR8DE2NB00M0
Card type Interface Card
Silkscreen 2x100GE-QSFP28

Appearance

Figure 1-195 Appearance of the CR8DE2NB00M0

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03035FBD&productModel=CR8DE2NB00M0#matchRelation

Indicators

Figure 1-196 Indicators on the CR8DE2NB00M0
Table 1-994 Indicators on the CR8DE2NB00M0
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
SRV Service Status Indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarm.
- Off The board is not running or no power is input.
L/A (0–1) Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted or received.
- Off The link is Down.
BREAKOUT (0–3) Breakout channel indicator Green Blink Each indicator for channels 0, 1, 2, and 3 turns on for 5s in sequence to indicate the status of the corresponding channel. This process repeats.
- Off No data is transmitting or receiving in this channel.

Ports

Table 1-995 Ports on the CR8DE2NB00M0
Port Connector Type Description Available Components
OUT0 IN0-OUT1 IN1 QSFP28 100 GE/50 GE service signal input and output interface

100Gbps QSFP28 Optical Module

40Gbps QSFP+ Optical Module

50Gbps QSFP28 BIDI Optical Module

50Gbps QSFP28 Optical Module

Optical Amplifier Module
Table 1-996 Port attributes about the CR8DE2NB00M0
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-997 Functions and features of the CR8DE2NB00M0
Functions and Features Description
Basic function

Occupies one flexible interface card slot.

Provides two 100GE/50GE interfaces for line-rate transmitting and receiving, and the interfaces support QSFP28 optical modules.
Reliability and availability Hot swappable.
Restrictions and remarks 100GE, 50GE, 40GE, 4*25GE, and 4*10GE interfaces are supported.
Breakout supported

Yes.

To enable the breakout function on a port, run the port split command.
Interface rate auto-sensing supported 03035FBD
FlexE supported

Yes

Ports on straight-through cards can be bonded to form a group.

1. If this interface card is installed on a PTN 6900-2-M8C or NetEngine 8000 M8 and works with IPUs such as TNRDIPU1T2C1, TNRDIPU480C1, TNRDIPU1T2C2, TNRDIPU480C2, TNRDIPU1T293, TNRDIPU48091, CR8DIPU1T2C1, CR8DIPU1T2C2, CR8DIPU480C1, CR8DIPU480C2, CR8DIPU240C1, CR8DIPU240C2, CR8DIPU480CT, CR8DIPU1T2CB, CR8DIPU1T2CC, CR8DIPU480C3, CR8DIPU480C4, CR8DIPU240C3, CR8DIPU240C4, CR8DIPU480C5, CR8DIPU480C8, CR8DIPU1T2CG, CR8DIPU480C7, CR8DIPU1T2CU, CR8DIPU480C9, CR8DIPU640C9, CR8PM9BASACQ, CR8DIPU480MA, CR8DIPU480MB, CR8DIPU1T2M5, CR8DIPU480M3, CR8DIPU1T2MG, CR8DIPU480MH, CR8DIPU1T2MT, or CR8DIPU480MG, it supports FlexE and the specifications are as follows:

Physical port 0 can be added to a group. port-id ranges from 1000 to 3000. A maximum of 48 FlexE clients can be created.

2. If this interface card is installed on a PTN 6900-2-M4 or NetEngine 8000 M4, it supports the following specifications:

Physical ports 0 and 1 can be added to the same group. port-id ranges from 1000 to 3000. A maximum of 48 FlexE clients can be created.

3. If this interface card is installed on a PTN 6900-2-M14, NetEngine 8000 M14, or NE40E-X2-M14 and works with IPUs such as TNRD0IPU2TC1, TNRDIPU1T2C3, TNRD0IPU2TC2, TNRDIPU1T2C4, TNRD0IPU2T90, TNRDIPU1T292, CR8D0IPU2TC1, CR8D0IPU2TC5, CR8DIPU1T2CJ, CR8D0IPU2TC2, CR8DIPU1T2C3, CR8DIPU1T2C4, CR8D0IPU2TC3, CR8D0IPU2TC4, CR8DIPU1T2C7, CR8DIPU1T2C8, CR8D0IPU2TD2, CR8D0IPU2TM1, CR8DIPU1T2M6, CR8D0IPU2TM2, CR5D0IPU2TC1, CR5D0IPU2TC5, CR5DIPU1T2C5, CR5DIPU1T2C3, CR5D0IPU2TC2, CR5DIPU1T2C4, CR5D0IPU2TC3, CR5DIPU1T2C1, CR5D0IPU2T91, or CR5DIPU1T292, it supports FlexE and the specifications are as follows:

Physical ports 0 and 1 can be added to the same group. port-id ranges from 1000 to 3000. A maximum of 48 FlexE clients can be created.

4. If this interface card is installed on a PTN 6900-2-M14, NetEngine 8000 M14, or NE40E-X2-M14 and works with IPUs such as TNRD0IPU3T91, TNRD0IPU3T92, TNRDUIPU2T91, TNRDUIPU2T92, CR8D0IPU3TM1, CR8D0IPU3TM2, CR8DUIPU2TM1, CR8DUIPU2TM2, CR8D0IPU3TM3, CR8DUIPU2TM3, CR5D0IPU3TM1, CR5D0IPU3TM2, CR5DUIPU2TM1, or CR5DUIPU2TM2, it supports FlexE and the specifications are as follows:

Physical ports 0 and 1 can be added to the same group. port-id ranges from 1000 to 3000. A maximum of 80 FlexE clients can be created.

Technical Specifications

Table 1-998 Technical specifications of the CR8DE2NB00M0
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.7 kg (1.54 lb)
Weight with packaging [kg(lb)] 1.2 kg (2.65 lb)
Typical power consumption [W] 41.5 W
Typical heat dissipation [BTU/hour] 134.55 BTU/hour
Long-term operating temperature [°C(°F)] –5°C to +55°C (23°F to 131°F)

CR8DE4NB00M1 (4-Port 100GBase/50GBase-QSFP28 Physical Interface Card(PIC))

Overview

Table 1-999 Basic information about the CR8DE4NB00M1
Item Details
Description 4-Port 100GBase/50GBase-QSFP28 Physical Interface Card(PIC)
Part Number 03034YNN
Model CR8DE4NB00M1
Card type Interface Card
Silkscreen 4x100GE-QSFP28

Appearance

Figure 1-197 Appearance of the CR8DE4NB00M1

Version Mapping

The huge hardware mapping data is migrated to the Info-Finder hardware center, where you can easily obtain hardware mapping information.

The Info-Finder hardware center incorporates comprehensive hardware information and mapping data by sales regions, allowing you to quickly find desired information and filter the mapping data for more fine-grained data display.

enterprise: https://info.support.huawei.com/info-finder/search-center/en/enterprise/routers/netengine-8000-pid-252772223/hardwarecenter?keyword=03034YNN&productModel=CR8DE4NB00M1#matchRelation

Indicators

Table 1-1000 Indicators on the CR8DE4NB00M1
Silkscreen Name Color Status Description
STAT Working status indicator Green Steady on The board is working properly.
Red Steady on The hardware on the board is faulty.
Orange Steady on A high-speed interface card is unexpectedly inserted into a low-speed interface card slot and an alarm is generated, or the logic is not loaded to the board.
- Off The board is not powered on or is not registered.
SRV Service Status Indicator Green Steady on The board has no CRC alarm.
Orange Steady on The board has CRC alarm.
- Off The board is not running or no power is input.
L/A (0–3) Interface status indicator Green Steady on The link is Up.
Green Blinking Data is being transmitted or received.
- Off The link is Down.
BREAKOUT (0–3) Breakout channel indicator Green Blink Each indicator for channels 0, 1, 2, and 3 turns on for 5s in sequence to indicate the status of the corresponding channel. This process repeats.
- Off No data is transmitting or receiving in this channel.

Ports

Table 1-1001 Ports on the CR8DE4NB00M1
Port Connector Type Description Available Components
OUT0 IN0–OUT3 IN3 QSFP28 100GE/50GE service signal input and output interface

100Gbps QSFP28 Optical Module

50Gbps QSFP28 BIDI Optical Module

50Gbps QSFP28 Optical Module

40Gbps QSFP+ Optical Module

Optical Amplifier Module
Table 1-1002 Port attributes about the CR8DE4NB00M1
Attributes Details
Working mode Full-duplex
Standards compliance IEEE 802.3
Frame format Ethernet_II, Ethernet_SAP and Ethernet_SNAP

Functions and Features

Table 1-1003 Functions and features of the CR8DE4NB00M1
Functions and Features Description
Basic function

Occupies one flexible card slot.

Provides four 100GE/50GE interfaces for line-rate transmitting and receiving, and supports QSFP28 optical modules.
Reliability and availability Hot swappable.
Restrictions and remarks 100GE, 50GE, 40GE, 4*25GE, and 4*10GE interfaces are supported.
Breakout supported

Yes.

To enable the breakout function on a port, run the port split command.
Interface rate auto-sensing supported Supports 40GE/50GE/100GE auto-sensing.
FlexE supported

Yes

Ports on straight-through cards can be bonded to form a group. Physical ports 0, 1, 2, 3 can be added to the same group. port-id ranges from 1000 to 3000. A maximum of 80 FlexE clients can be created.

Technical Specifications

Table 1-1004 Technical specifications of the CR8DE4NB00M1
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)] 19.8 mm x 193.8 mm x 209.3 mm (0.78 in. x 7.63 in. x 8.24 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 70 mm x 285 mm x 300 mm (2.76 in. x 11.22 in. x 11.81 in.)
Weight without packaging [kg(lb)] 0.7 kg (1.54 lb)
Weight with packaging [kg(lb)] 1.2 kg (2.65 lb)
Typical power consumption [W] 50.0 W
Typical heat dissipation [BTU/hour] 162.35 BTU/hour
Long-term operating temperature [°C(°F)] –5°C to +55°C (23°F to 131°F)
Translation
Favorite
Download
Update Date：2025-01-09
Document ID：EDOC1100382057
Views：29626
Downloads：465
Average rating：0.0Points

Related Version

Related Documents

Digital Signature File

digtal sigature tool