ME60 V800R023C10SPC500 Hardware Description
100Gbps CFP2 DWDM Optical Module
134.7Gbps&SDFEC(4*25.78/4*27.95)-CFP2-SMF-1560.61-1529.16nm-2000km-commercial
Table 1-1523 134.7Gbps&SDFEC(4*25.78/4*27.95)-CFP2-SMF-1560.61-1529.16nm-2000km-commercial specifications
| Item | Value |
|---|---|
| Basic Information | |
| Module name | 134.7Gbps&SDFEC(4*25.78/4*27.95)-CFP2-SMF-1560.61-1529.16nm-2000km-commercial |
| Part Number | 02311URS |
| Model | OSNB00C02 |
| Form factor | CFP2 |
| Application standard | ITU-T G.709/G.798 |
| Connector type | LC |
| Optical fiber type | SMF |
| Bit error ratio (BER) | <1x10E-12 |
| Working case temperature [°C(°F)] | 0°C to 70°C(32°F to 158°F) |
| DDM options | CFP MSA |
| Environment standard | RoHS |
| Security standard | FCC Class B, IEC 60825-1 Class 1 |
| ESD(HBM1) [V] | 500 V |
| Transmission rate [bit/s] | 111.81 Gbit/s 134.7 Gbit/s |
| Target transmission distance [km] | Staircase FEC: 1200 km SDFEC: ≥2000 km |
| Transmitter Optical Characteristics | |
| Center wavelength [nm] | C band |
| Center frequency [THz] | 191.25 THz ~ 196.10 THz |
| Tx operating wavelength range [nm] | 1529.16 nm - 1560.61 nm |
| Maximum Tx optical power (AVG) [dBm] | 1 dBm |
| Maximum Tx optical power (OMA) [dBm] | - |
| Minimum Tx optical power (AVG) [dBm] | -10 dBm |
| Minimum Tx optical power (OMA) [dBm] | - |
| Minimum extinction ratio [dB] | - |
| Modulation mode | DP-QPSK/DP-DQPSK |
| Number of tunable channels | 80 |
| Channel spacing [GHz] | 50 GHz |
| Center frequency deviation [GHz] | ±1.8 GHz |
| Tx channel tuning time [s] | 60 s |
| Output optical power in case of laser shutdown [dBm] | ≤-40 dBm |
| Receiver Optical Characteristics | |
| Rx operating wavelength range [nm] | 1529.16 nm - 1560.61 nm |
| Rx sensitivity (AVG) [dBm] | QPSK: -28 dBm DQPSK: -27 dBm |
| Rx sensitivity (OMA) [dBm] | - |
| Overload power (AVG) [dBm] | 10 dBm |
| Overload power (OMA) [dBm] | - |
| FEC mode | SDFEC StaircaseFEC |
| Rx optical power range [dBm] | -16 dBm ~ 0 dBm(EOL) 0.5dB penalty@input power: -3 dBm ~ 0 dBm; 0dB penalty@input power: -14 dBm ~ -3 dBm; 0.5dB penalty@input power: -16 dBm ~ -14 dBm; |
| Minimum OSNR (back-to-back&EOL) [dB] | 12.3 dB for SDFEC&QPSK 13.5 dB for SDFEC&DQPSK 15 dB for StaircaseFEC&DQPSK |
| CD tolerance [ps/nm] | -40000 ps/nm ~ 40000 ps/nm |
| PMD tolerance [ps] | 25 ps |
| PDL tolerance [dB] | 3 with ≤1.5 dB OSNR penalty |
| SOP tolerance [krad/s] | Standard: 100G: 628@0.5dB penalty High: 100G: 3768@2dB penalty |
NOTE:
When the FEC mode of the Acacia 100G CFP2 DCO optical module is set to SDFEC and the signal coding mode is set to DQPSK, the value of signal-coding dqpsk Tx must be set to 3 or 4. When the signal coding mode is set to 1, 2, 5, 6, 7, or 8, the port reports a LOF alarm. |
|
Document ID：EDOC1100383692
Views：16376
Downloads：112
Average rating：0.0Points