F1002-AC-H1 V500R024C00 Web Page Reference 01
LAN/WAN Port Configuration
- In the navigation tree on the left, choose Advanced > LAN > LAN/WAN Port Configuration. In the pane on the right, check whether to configure the LAN port as the upstream port, as shown in Figure 7-15.
![]()
- After you click Apply for LAN/WAN Port Configuration, services will be interrupted during system restart. Exercise caution when performing this operation.
- The "WAN-side HTTPS Access Control" function is disabled by default. If the LAN port is configured as the upstream port, the web page cannot be accessed through the LAN port that is configured as the upstream port. As a result, the connected web page is interrupted.
- Click Apply.
Document ID：EDOC1100408647
Views：9649
Downloads：31
Average rating：0.0Points