Checking Whether the HTTPS Server Configuration Is Correct

Procedure

1. Check whether the HTTPS server is enabled.

   Run the display http server command in any view. If the value of HTTPS server status is Disabled, run the http secure-server enable command in the system view to enable the HTTPS server.

2. Check the port number of the HTTPS server.

   Run the display http server command in any view to check the value of HTTPS server port.

   Ensure that the input port number in the address bar is the same as the value of HTTPS server port.

   Run the http secure-server port command in the system view to configure the port number of the HTTPS server.

   NOTE:

   If the HTTPS service port number of the device is unavailable during login, configure another port number and log in again.

   <Huawei> system-view
   [Huawei] http secure-server port 1278