CX320 Switch Module V100R001 Configuration Guide 15
Configuring the Interval for Collecting Traffic Statistics on an Interface
Run the set flow-stat interval interval-time command in the interface or system view to set the interval for collecting traffic statistics on an interface. The value of interval-time ranges from 10 to 600, in seconds. The value must be an integer multiple of 10 and the defaults to 300 seconds.
# Set the interval for collecting traffic statistics on 10GE1/17/1 to 400 seconds.
<HUAWEI> system-view [~HUAWEI] interface 10ge 1/17/1 [~HUAWEI-10GE1/17/1] set flow-stat interval 400 [*HUAWEI-10GE1/17/1] commit
# Set the interval for collecting traffic statistics to 400 seconds in the system view.
<HUAWEI> system-view [~HUAWEI] set flow-stat interval 400 [*HUAWEI] commit
The interval configured in the system view takes effect on all the interfaces that use the default interval.
The interval configured in the interface view takes effect only on this interface.
The interval configured in the interface view takes precedence over the interval configured in the system view.
Document ID：EDOC1000128406
Views：2740048
Downloads：4189
Average rating：4.5Points