SupportDocumentationWLANAPAP6000Installation & UpgradeHardware Installation Guide

WLAN Hardware Installation and Maintenance Guide

AC6605-26-PWR

AC6605-26-PWR

Overview

Table 1-16 Basic information about the AC6605-26-PWR
Item Details
Description AC6605-26-PWR Bundle(Including AC6605-26-PWR,Resource License 64AP)
Part Number 02357917
Model AC6605-26-PWR
First supported version V200R001C00

Appearance

Figure 1-10 Appearance of the AC6605-26-PWR

Ports

Figure 1-11 Ports on the AC6605-26-PWR

1

GE1 to GE20

2

GE21 to GE24

3

Ethernet optical port

4

ETH

5

Mini USB

6

CONSOLE
Table 1-17 Ports on the AC6605-26-PWR
Port Connector Type Description Available Components
GE1 to GE20 RJ45 Twenty 10/100/1000BASE-T Ethernet electrical ports that support 10M/100M/1000M auto-sensing and PoE power supply

Network cable
GE21 to GE24 RJ45/SFP

Combo ports. When they are used as electrical ports, they support:

  • 10M/100M/1000M auto-sensing
  • PoE power supply on four ports

Network cable/Optical module
ETH RJ45 Management network port

Network cable
Mini USB - The function is unavailable. -
CONSOLE RJ45 Console port

Console cable
Ethernet optical port SFP+ 10GE SFP+ Ethernet optical port that supports 1000M auto-sensing and is used to send and receive data at 1 Gbit/s or 10 Gbit/s. It must be used together with a matching optical module and optical fiber.

Optical module

Indicators and Buttons

Figure 1-12 Indicators and buttons on the AC6605-26-PWR

1

PWR1 indicator

2

PWR2 indicator

3

SYS indicator

4

STAT indicator

5

SPED indicator

6

PoE indicator

7

MODE button

8

Service port indicators

9

ETH indicator

10

CONSOLE indicator

11

Mini USB indicator (reserved)

-

-
Table 1-18 Indicators on the AC6605-26-PWR
Silkscreen Name Color Status Description
PWR1 Indicator of power module 1 - Off The PWR1 slot has no power module installed, or the power module is faulty when a single power module is used.
Green Steady on A power module is installed in power module slot 1 and is working normally.
Yellow Steady on
  • Dual power modules are installed but are not switched on.
  • Dual power modules are installed but receive no input power.
  • The power modules are faulty.
PWR2 Indicator of power module 2 - Off The PWR2 slot has no power module installed, or the power module is faulty when a single power module is used.
Green Steady on A power module is installed in power module slot 2 and is working normally.
Yellow Steady on
  • Dual power modules are installed but are not switched on.
  • Dual power modules are installed but receive no input power.
  • The power modules are faulty.
SYS System status indicator - Off The system is not running.
Green Fast blinking The system is starting.
Green Slow blinking The system is running properly.
Yellow Steady on An exception occurs in system operation, for example, overheat and function failure.
Yellow Blinking The device is in sleeping mode.
Red Steady on The system does not work normally after registration, or a fan alarm or a temperature alarm has been generated.
STAT STAT indicator - Off The STAT mode is not selected.
Green Steady on The service port indicator is in STAT mode.
SPED SPED mode indicator - Off The SPED mode is not selected.
Green Steady on The service port indicator is in SPED mode.
PoE PoE indicator - Off The PoE mode is not selected.
Green Steady on The service port indicator is in PoE mode.
- Service port indicator (STAT mode) - Off The port is not connected or is shut down.
Green Steady on A link has been established on the port.
Green Blinking The port is sending or receiving data.
- Service port indicator (SPED mode) - Off The port is not connected or is shut down.
Green Steady on
  • 10M/100M/1000M port: The port is working at 10/100 Mbit/s.
  • 1000M/10GE port: The port is working at 1000 Mbit/s.
Green Blinking
  • 10M/100M/1000M port: The port is working at 1000 Mbit/s.
  • 1000M/10GE port: The port is working at 10 Gbit/s.
- Service port indicator (PoE mode) - Off The port is not providing power to a remote PD.
Green Steady on The port is providing power to a PD.
Yellow Steady on The PoE function is disabled on the port.
Yellow Blinking The port stops providing PoE power due to an exception (for example, an incompatible PD is connected to the port).
Yellow/green Blinking alternately in two colors
  • The power of the PD exceeds the power capacity of the port or the configured power threshold.
  • The total power consumption of PDs has reached the maximum power of the device.
  • The manual power management mode is used, but the port is not enabled to provide power to the PD.
- ETH indicator - Off The ETH port is not connected.
Green Steady on The ETH port is connected.
Green Blinking The port is sending or receiving data.
- Mini USB indicator - - The function is unavailable.
- CONSOLE indicator - Off The console port is disabled.
Green Steady on The console port is enabled.
Table 1-19 Buttons on the AC6605-26-PWR
Silkscreen Name Description
MODE Mode switch button of service port indicators

By default, a service port indicator works in STAT mode.

Press the MODE button once to switch to the SPED mode, press the MODE button again to switch to the PoE mode, and press the MODE button a third time to switch to the STAT mode.

If you do not press the button within 45 seconds, the service port indicators restore to the default mode.

Heat Dissipation System

The heat dissipation mode of the device is forced air cooling. Hot air is exhausted from the fans at both sides, and air is intake from other hollow holes.

Technical Specifications

Table 1-20 Technical specifications of the AC6605-26-PWR
Item Specification
Installation Type
  • Rack
  • Desk
Dimensions without packaging (H x W x D) [mm(in.)] 43.6 mm x 442 mm x 420 mm (1.72 in. x 17.4 in. x 17.4 in.)
Weight without packaging [kg(lb)] 5.48 kg (12.08 lb)
Storage NOR Flash 256 MB
Console port RJ45
Eth Management port RJ45 FE
Maximum power consumption [W] 85 W
Maximum heat dissipation [BTU/hour] 290 BTU/hour
Power supply mode Pluggable power supply
Rated input voltage [V] 100 V to 240 V
Input voltage range [V] 90 V to 264 V
Service port surge protection 6 kV in common mode
Relationship between PoE and system power modules [W]

Pluggable power module, providing power for 24 GE ports, each of which complies with 802.3af/at

Rated input voltage: 100–240 V AC; 50/60 Hz

Maximum input voltage: 90–264 V AC; 47 Hz to 63 Hz

Maximum output current: +12 V: 10 A; –53.5 V: 7.11 A

Maximum output power: 380 W (PoE), 500 W (total)
PoE OUT Supported
Maximum PoE output power [W] 30 W
Redundant power supply Power modules of the same type work in 1+1 redundancy.
Types of fans Built-in
Maximum number of physical ports on the entire device 20 x 10/100/1000BASE-T + 4 x COMBO + 2 x 10G SR/LR
Long-term operating temperature [°C(°F)] –5°C to +50°C (23°F to 122°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum ambient temperature decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.)
Storage temperature [°C(°F)] –40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH] 5% RH to 95% RH
Long-term operating altitude [m(ft.)] –60 m to +5000 m (–196.85 ft to +16404.20 ft)
Atmospheric pressure [kPa] 53kPa - 106kPa ETSI 300 019-2-3
Noise at normal temperature (acoustic power) [dB(A)] < 36 dBA
Ground Grounding
USB Not supported
MTBF [year] 56.4 year
MTTR [hour] 2 hour
Translation
Favorite
Download
Update Date：2025-08-01
Document ID：EDOC1100278610
Views：428887
Downloads：12732
Average rating：1.0Points

Digital Signature File

digtal sigature tool