S300, S500, S2700, S5700, and S6700 V200R022C10 Command Reference

broadcast-suppression (VLAN view)

Function

The broadcast-suppression command sets the rate limit for broadcast packets in a VLAN.

The undo broadcast-suppression command cancels broadcast packets suppression in a VLAN.

By default, broadcast packets are not suppressed in a VLAN.

Format

broadcast-suppression threshold-value

undo broadcast-suppression

Parameters

Parameter	Description	Value
threshold-value	Specifies the rate limit of broadcast packets.	The value is an integer that ranges from 64 to 10000000, in kbit/s.

Views

VLAN view

Default Level

2: Configuration level

Usage Guidelines

The accumulating broadcast packets on the network occupy more and more network resources. This affects normal operation of services on the network.

After you run the broadcast-suppression command, the device limits the rate of broadcast packets based on the configured rate limit. If the rate limit is exceeded, the device discards excess broadcast packets.

Example

# Set the rate limit to 1000 kbit/s for broadcast packets in VLAN 10.

<HUAWEI> system-view
[HUAWEI] vlan 10
[HUAWEI-vlan10] broadcast-suppression 1000

Translation

Favorite

Download

Update Date：2025-05-27

Document ID：EDOC1100325914

Downloads：918

Average rating：0.0Points

Digital Signature File

digtal sigature tool