LUNA2000-S1 User Manual
M:LUNA2000-7-S1,LUNA2000-14-S1,LUNA2000-21-S1
M:LUNA2000-7-S1,LUNA2000-14-S1,LUNA2000-21-S1
6.4.4 Forced Charge/Discharge
- Forced charge/discharge is used to test the battery connected to an inverter. In normal cases, you are advised not to set forced charge/discharge. The TOU mode is recommended if you want the battery to be charged and discharged in fixed periods for a long time.
- If the inverter is upgraded or reset, or the battery is upgraded or goes offline, forced charge and discharge will stop.
ESS Charge/Discharge
Connect to the EMMA on the app. Tap Monitor on the home screen, select the corresponding inverter, and choose .
Mode |
Parameter |
Description |
Value Range |
|---|---|---|---|
Specifies whether to charge or discharge the ESS. |
|
||
Specifies the forced charge/discharge power. |
|
||
Specifies the charge or discharge mode. |
|
||
Specifies the charge or discharge duration. |
[0, 1440] |
||
Specifies the charged or discharged energy. This parameter is not configurable. |
- |
||
Specifies the remaining charge or discharge duration. This parameter is not configurable. |
- |
||
Sets the charge target SOC. |
[0, 100] |
||
After this function is enabled, the ESS starts charging and stops charging when the target SOC is reached. |
|||
Displays the charging status. |