SUN2000-(5K-12K)-MAP0 Series User Manual
M:SUN2000-5K-MAP0,SUN2000-6K-MAP0,SUN2000-8K-MAP0,SUN2000-10K-MAP0,SUN2000-10K-MAP0-BE,SUN2000-12K-MAP0,SUN2000-5K-MAP0-ZH,SUN2000-6K-MAP0-ZH,SUN2000-8K-MAP0-ZH,SUN2000-10K-MAP0-ZH,SUN2000-12K-MAP0-ZH;Smart PV inverter, Smart PV Controller, Cascading, AFCI, dry contact scheduling, dry contact function, IPS self-check, rapid shutdown
M:SUN2000-5K-MAP0,SUN2000-6K-MAP0,SUN2000-8K-MAP0,SUN2000-10K-MAP0,SUN2000-10K-MAP0-BE,SUN2000-12K-MAP0,SUN2000-5K-MAP0-ZH,SUN2000-6K-MAP0-ZH,SUN2000-8K-MAP0-ZH,SUN2000-10K-MAP0-ZH,SUN2000-12K-MAP0-ZH;Smart PV inverter, Smart PV Controller, Cascading, AFCI, dry contact scheduling, dry contact function, IPS self-check, rapid shutdown
9.2 SUN2000-(5K-12K)-MAP0 Technical Specifications
Efficiency
Item |
SUN2000-5K-MAP0 |
SUN2000-6K-MAP0 |
SUN2000-8K-MAP0 |
SUN2000-10K-MAP0 |
SUN2000-10K-MAP0-BE |
SUN2000-12K-MAP0 |
---|---|---|---|---|---|---|
Maximum efficiencya |
98.40% |
98.60% |
98.60% |
98.60% |
98.60% |
98.60% |
European efficiencya |
97.50% |
97.70% |
98.00% |
98.10% |
98.10% |
98.20% |
Note a: The efficiency test condition is three-phase three-wire mode. |
Input
Item |
SUN2000-5K-MAP0 |
SUN2000-6K-MAP0 |
SUN2000-8K-MAP0 |
SUN2000-10K-MAP0 |
SUN2000-10K-MAP0-BE |
SUN2000-12K-MAP0 |
---|---|---|---|---|---|---|
Recommended maximum input DC power |
9000 W |
11000 W |
14600 W |
18000 W |
18000 W |
22000 W |
Maximum input voltageb |
1100 V |
|||||
Maximum input current per MPPT |
16 A |
|||||
Maximum short-circuit current per MPPT |
22 A |
|||||
Minimum startup voltage |
160 V |
|||||
MPPT voltage rangec |
160–1000 V |
|||||
Full-load MPPT voltage range |
400–850 V |
|||||
Rated input voltage |
600 V |
|||||
Maximum number of inputs |
2 |
|||||
Number of MPPTs |
2 |
|||||
Rated battery voltage |
600 V DC |
|||||
Battery voltage range |
600–980 V DC |
|||||
Maximum battery current |
20 A |
|||||
Battery type |
Li-ion |
|||||
Note b: The maximum input voltage is the maximum DC input voltage that the inverter can withstand. If the input voltage exceeds this value, the inverter may be damaged. Note c: If the input voltage is beyond the MPPT voltage range, the inverter cannot work properly. |
Output
Item |
SUN2000-5K-MAP0 |
SUN2000-6K-MAP0 |
SUN2000-8K-MAP0 |
SUN2000-10K-MAP0 |
SUN2000-10K-MAP0-BE |
SUN2000-12K-MAP0 |
---|---|---|---|---|---|---|
Rated output power |
5000 W |
6000 W |
8000 W |
10000 W |
10000 W |
12000 W |
Maximum apparent power |
5500 VA |
6600 VA |
8800 VA |
11000 VA |
10000 VA |
13200 VA |
Maximum active power (cosφ = 1) |
5500 W |
6600 W |
8800 W |
11000 W |
10000 W |
13200 W |
Rated output voltage |
220 V/380 V, 3W/N+PE 230 V/400 V, 3W/N+PE 240 V/415 V, 3W/N+PE |
|||||
Maximum output voltage at long-term operation |
Refer to the local power grid standards. |
|||||
Rated output current |
7.6 A/380 V 7.2 A/400 V 6.9 A/415 V |
9.1 A/380 V 8.7 A/400 V 8.3 A/415 V |
12.1 A/380 V 11.6 A/400 V 11.1 A/415 V |
15.2 A/380 V 14.5 A/400 V 13.9 A/415 V |
15.2 A/380 V 14.5 A/400 V 13.9 A/415 V |
18.2 A/380 V 17.3 A/400 V 16.7 A/415 V |
Maximum output current |
8.3 A/380 V 8 A/400 V 7.7 A/415 V |
10 A/380 V 9.6 A/400 V 9.2 A/415 V |
13.3 A/380 V 12.8 A/400 V 12.2 A/415 V |
16.7 A/380 V 15.9 A/400 V 15.3 A/415 V |
15.2 A/380 V 14.5 A/400 V 13.9 A/415 V |
20.2 A/380 V 19.1 A/400 V 18.5 A/415 V |
Overload output power |
150% load (single-phase): 5 minutes 200% load (single-phase): 10 seconds |
|||||
Maximum input current |
7.6 A |
9.1 A |
12.1 A |
15.2 A |
15.2 A |
18.2 A |
Output voltage frequency |
50 Hz/60 Hz |
|||||
Power factor |
0.8 leading ... 0.8 lagging |
|||||
Output DC component (DCI) |
< 0.25% of the rated output |
|||||
Maximum total harmonic distortion (AC THDi) |
< 3% (rated conditions) |
Off-grid Output
Item |
SUN2000-5K-MAP0 |
SUN2000-6K-MAP0 |
SUN2000-8K-MAP0 |
SUN2000-10K-MAP0 |
SUN2000-10K-MAP0-BE |
SUN2000-12K-MAP0 |
---|---|---|---|---|---|---|
Rated output voltage |
220 V/380 V, 3W/N+PE 230 V/400 V, 3W/N+PE 240 V/415 V, 3W/N+PE |
|||||
Rated output frequency |
50 Hz/60 Hz |
|||||
Rated output power |
5000 W |
6000 W |
8000 W |
10000 W |
10000 W |
12000 W |
Long-term load power |
5500 W |
6600 W |
8800 W |
11000 W |
10000 W |
13200 W |
Overload output power |
110% load (three-phase): long-term operation 150% load (three-phase): 5 minutes 150% load (single-phase): 5 minutes 200% load (three-phase): 10 seconds |
110% load (three-phase): long-term operation 150% load (three-phase): 1 minute 150% load (single-phase): 5 minutes 200% load (three-phase): 10 seconds |
Protection
Item |
SUN2000-5K-MAP0 |
SUN2000-6K-MAP0 |
SUN2000-8K-MAP0 |
SUN2000-10K-MAP0 |
SUN2000-10K-MAP0-BE |
SUN2000-12K-MAP0- |
---|---|---|---|---|---|---|
Overvoltage category |
PV II/AC III |
|||||
Input DC switch |
Supported |
|||||
Anti-islanding protection |
Supported |
|||||
Output overcurrent protection |
Supported |
|||||
Input reverse connection protection |
Supported |
|||||
DC surge protection |
TYPE II |
|||||
AC surge protection |
Yes, compatible with TYPE II protection class according to EN/IEC 61643-11 |
|||||
Insulation resistance detection |
Supported |
|||||
Residual current monitoring unit (RCMU) |
Supported |
Display and Communication
Item |
SUN2000-5K-MAP0 |
SUN2000-6K-MAP0 |
SUN2000-8K-MAP0 |
SUN2000-10K-MAP0 |
SUN2000-10K-MAP0-BE |
SUN2000-12K-MAP0 |
---|---|---|---|---|---|---|
Display |
LED indicators; WLAN+app |
|||||
WLAN-FE Dongle |
Supported |
|||||
4G Smart Dongle |
Supported |
|||||
EMMA |
Supported |
|||||
SmartGuard |
Supported |
|||||
RS485 communication |
Supported |
|||||
Built-in WLAN |
Supported |
|||||
DC MBUS |
Supported |
|||||
AFCI |
Supported |
|||||
PID recovery |
Supported |
General Specifications
Item |
SUN2000-5K-MAP0 |
SUN2000-6K-MAP0 |
SUN2000-8K-MAP0 |
SUN2000-10K-MAP0 |
SUN2000-10K-MAP0-BE |
SUN2000-12K-MAP0 |
---|---|---|---|---|---|---|
Dimensions (W x H x D) |
490 mm x 460 mm x 130 mm |
|||||
Net weight |
≤ 21 kg |
|||||
Noise |
≤ 29 dB (typical working condition) |
|||||
Operating temperature |
–25°C to +60°C |
|||||
Relative humidity |
0–100% RH |
|||||
Cooling mode |
Natural cooling |
|||||
Maximum operating altitude |
4000 m (derated when the altitude is greater than 2000 m) |
|||||
Storage temperature |
–40°C to +70°C |
|||||
IP rating |
IP66 |
|||||
Topology |
Transformerless |
Wireless Communication Parameters
Item |
Inverter Built-in WiFi |
---|---|
Frequency |
2400–2483.5 MHz |
Protocols and standards |
WLAN 802.11b/g/n |
Bandwidth |
≤ 20 MHz |
Maximum transmit power |
≤ 20 dBm EIRP |