SmartPVMS 24.5.0 FusionSolar SmartPVMS User Manual
Power Normalization
To intuitively measure the energy yield efficiency of plants and devices, power normalization is required to display the power in a unified manner so that users can view and compare the data. Power normalization refers to the ratio of power to installed capacity. A larger value indicates a higher performance ratio. It can be used to analyze low-efficiency power generation scenarios.
Prerequisites
Today's energy yield data is displayed on the page only after the energy yield signal is reported by the SmartLogger.
Procedure
- Choose from the main menu.
- Select the PV plant to be viewed on the left and choose Power Normalization.
- On the current page, perform the following operations based on site requirements.
Table 3-6 Power normalization
Task
Procedure
Viewing the plant power normalization data
- Select a time dimension and click Search.
- View the power normalization data of each plant in the bar chart in the lower part.
Viewing SmartLogger power normalization data of a specified plant
- In the filtered plant average power normalization bar chart, click the bar chart of the desired plant.
- View the SmartLogger power normalization data of the plant on the page.NOTE:
When the date is set to the current day, you can view Normalized average power data or Normalized real-time power data in the upper left corner.