No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

SUN2000-(3KTL-10KTL) User Manual

This document describes the SUN2000-3KTL-M0, SUN2000-4KTL-M0, SUN2000-5KTL-M0, SUN2000-6KTL-M0, SUN2000-8KTL-M0, SUN2000-10KTL-M0, and SUN2000-12KTL-M0 in terms of their installation, electrical connections, commissioning, maintenance, and troubleshooting. BOM number: 01074467, 01074295, 01074300, 01074301, 01074302, 01074306, 01074311, 01074314, 01074315, 01074316, 01074320
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Technical Data

Technical Data

Efficiency

Technical Specifications

SUN2000-3KTL-M0

SUN2000-4KTL-M0

SUN2000-5KTL-M0

SUN2000-6KTL-M0

SUN2000-8KTL-M0

SUN2000-10KTL-M0

Maximum efficiency

98.20%

98.30%

98.40%

98.60%

98.60%

98.60%

European efficiency

96.70%

97.10%

97.50%

97.70%

98.00%

98.10%

Input

Technical Specifications

SUN2000-3KTL-M0

SUN2000-4KTL-M0

SUN2000-5KTL-M0

SUN2000-6KTL-M0

SUN2000-8KTL-M0

SUN2000-10KTL-M0

Maximum input voltage

1100 V

Maximum input current (per MPPT)

11 A

Maximum short-circuit current (per MPPT)

15 A

Maximum inverter backfeed current to the PV array

0 A

Minimum startup voltage

200 V

Operating voltage range

140–980 V

Full-load MPPT voltage range

140–850 V

190–850 V

240–850 V

285–850 V

380–850 V

470–850 V

Rated input voltage

600 V

Number of input routes

2

Number of MPP trackers

2

Output

Technical Specifications

SUN2000-3KTL-M0

SUN2000-4KTL-M0

SUN2000-5KTL-M0

SUN2000-6KTL-M0

SUN2000-8KTL-M0

SUN2000-10KTL-M0

Rated active power

3000 W

4000 W

5000 W

6000 W

8000 W

10,000 W

Maximum apparent power

3300 VA

4400 VA

5500 VA

6600 VA

8800 VA

11,000 VA

Maximum active power (cosφ = 1)

3300 W

4400 W

5500 W

6000 W

8800 W

11,000 W

Rated output voltage

220/380 V, 230/400 V, 3W+(N)+PE

Rated output current

4.6 A (380 V)/4.4 A (400 V)

6.1 A (380 V)/5.8 A (400 V)

7.6 A (380 V)/7.3 A (400 V)

9.1 A (380 V)/8.7 A (400 V)

12.2 A (380 V)/11.6 A (400 V)

15.2 A (380 V)/14.5 A (400 V)

Maximum output current

5.1 A

6.8 A

8.5 A

10.1 A

13.5 A

16.9 A

Adapted power grid frequency

50/60 Hz

Power factor

0.8 leading... 0.8 lagging

Maximum total harmonic distortion (rated power)

< 3%

Protection and Feature

Technical Specifications

SUN2000-3KTL-M0

SUN2000-4KTL-M0

SUN2000-5KTL-M0

SUN2000-6KTL-M0

SUN2000-8KTL-M0

SUN2000-10KTL-M0

Input DC switch

Yes

Anti-islanding protection

Yes

Output overcurrent protection

Yes

Output short-circuit protection

Yes

Output overvoltage protection

Yes

Input reverse connection protection

Yes

PV string fault detection

Yes

DC surge protection

Yes

AC surge protection

Yes

Insulation resistance detection

Yes

Residual current monitoring unit (RCMU)

Yes

Optimizer

Optional

Built-in PID repaira

Optional

Note a: When the inverter is disconnected from the grid, the built-in PID can repair the PV– positive offset. (PV– positive offset refers to raising the voltage between PV– and the ground to above 0 V through voltage compensation.) When designing the system, confirm with the PV module manufacturer that the anti-PID voltage compensation direction of the PV module is the PV– positive offset. Otherwise, PV modules may be damaged. Built-in PID repair supports P-type (mono, poly) and N-type (nPERT, HIT) PV modules.

For the SUN2000 that supports built-in PID repair, when Built-in PID running mode is set to Repair, there is repair voltage between PV modules and the ground at night. If you need to maintain PV modules at night, power off the SUN2000 to avoid electric shocks.

Display and Communication

Technical Specifications

SUN2000-3KTL-M0

SUN2000-4KTL-M0

SUN2000-5KTL-M0

SUN2000-6KTL-M0

SUN2000-8KTL-M0

SUN2000-10KTL-M0

Display

LED indicators; WLAN+app

RS485

Yes

Communications expansion module

(Optional) WLAN/GPRS/4G

Remote dry contact scheduling

Yes

Common Parameters

Technical Specifications

SUN2000-3KTL-M0

SUN2000-4KTL-M0

SUN2000-5KTL-M0

SUN2000-6KTL-M0

SUN2000-8KTL-M0

SUN2000-10KTL-M0

Dimensions (W x H x D)

525 mm x 470 mm x 166 mm

Net weight

17 kg (with hanging kits, without mounting brackets)

Operating temperature

–25°C to +60°C

Cooling mode

Natural convection

Highest operating altitude

0–4000 m (derated above 3000 m)

Relative humidity

0%–100% RH

Input terminal

Amphenol Helios H4

Output terminal

Waterproof quick-connect terminal

IP rating

IP65

Topology

No transformer

Download
Updated: 2019-05-31

Document ID: EDOC1100059932

Views: 2450

Downloads: 194

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next