Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the Stack Status
Context
To ensure normal system operations or locate faults that occur in the stack, run the following command in any view to monitor the stack running status.
Procedure
- Run the display stack [ member member-id ] command to check information about stack member switches.
- Run the display stack configuration [ member member-id | all ] command to check the stack configuration.
- Run the display stack topology [ link | neighbor ] command to check stack topology information.
- Run the display stack troubleshooting [ member member-id ] { current | history } command to check the stack fault events.
- Run the display stack link-state last-down-reason command to check why the stack link protocol becomes Down.