CloudEngine S5700 Series Switches Hardware Description (V600)

S5735-L8P4X-QA-V2 (98012074)

S5735-L8P4X-QA-V2 (98012074)

Overview

Table 4-209 Basic information about the S5735-L8P4X-QA-V2
Item Details
Description S5735-L8P4X-QA-V2 (8*10/100/1000BASE-T ports, 4*10GE SFP+ ports, PoE+, AC power, Fanless)
Part Number 98012074
Model S5735-L8P4X-QA-V2
First supported version V600R022C01

Components

Figure 4-81 S5735-L8P4X-QA-V2 appearance

1

One MODE button

2

Eight 10/100/1000BASE-T PoE+ ports

3

Four 10GE SFP+ ports

4

One console port

5

One PNP button

NOTICE:

To restore the factory settings and reset the switch, hold down the button for at least 6 seconds.

To reset the switch, press the button.

Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.

6

AC socket

NOTE:

It is used with an AC power cable.

7

Jack for AC power cable locking strap

NOTE:
The AC power cable locking strap is not delivered with the switch.

8

Ground screw

NOTE:
It is used with a ground cable.

Ports

Table 4-210 Ports on the S5735-L8P4X-QA-V2
Port Connector Type Description Available Components
10/100/1000BASE-T port RJ45 A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s.

Ethernet cable

10GE SFP+ optical port SFP+ A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s or 10 Gbit/s.
Console port RJ45 The console port is connected to a console for on-site configuration.

Console cable

Indicators and Buttons

The S5735-L8P4X-QA-V2 has similar indicators to those on the S5735-L8P2T4X-A-V2. For details, see the S5735-L8P2T4X-A-V2.

Power Supply System

The switch has a built-in AC power module and does not support pluggable power modules. The built-in power module can provide 125 W PoE power, which ensures full PoE power on 8 ports in compliance with 802.3af or on 4 ports in compliance with 802.3at.

Heat Dissipation System

The switch has no fans and uses natural heat dissipation.

Technical Specifications

Table 4-211 Technical specifications of the S5735-L8P4X-QA-V2
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)]

Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 320.0 mm x 210.0 mm (1.72 in. x 12.6 in. x 8.27 in.)

Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 320.0 mm x 217.0 mm (1.72 in. x 12.6 in. x 8.54 in.)

Dimensions with packaging (H x W x D) [mm(in.)] 90.0 mm x 465.0 mm x 380.0 mm (3.54 in. x 18.31 in. x 14.96 in.)
Chassis height [U] 1 U
Chassis material Metal
Weight without packaging [kg(lb)] 2.24 kg (4.94 lb)
Weight with packaging [kg(lb)] 3.06 kg (6.75 lb)
Typical power consumption [W] 21.16 W
Typical heat dissipation [BTU/hour] 72.2 BTU/hour
Maximum power consumption [W]
  • Without PoE: 22.21 W
  • Full PoE load: 152.55 W (PoE: 125 W)
Maximum heat dissipation [BTU/hour]
  • Without PoE: 75.78
  • Full PoE load: 520.52
Static power consumption [W] 15.24 W
MTBF [years] 70.41 years
Availability > 0.99999
Noise at normal temperature (acoustic power) [dB(A)] Noise-free (no fans)
Noise at normal temperature (acoustic pressure) [dB(A)] Noise-free (no fans)
Number of card slots 0
Number of power slots 0
Number of fans modules 0
Redundant power supply Not supported
Long-term operating temperature [°C(°F)] –5°C to +45°C (23°F to 113°F) at an altitude of 0 to 1800 m (0 to 5905.44 ft.)
Restriction on the operating temperature variation rate [°C(°F)]

When the altitude is 1800–5000 m (5906–16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).

Devices cannot start when the temperature is lower than 0°C (32°F).

Storage temperature [°C(°F)] –40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH] 5% RH to 95% RH, non-condensing
Long-term operating altitude [m(ft.)] 0–5000 m (0–16404 ft.)
Storage altitude [m(ft.)] 0-5000 m (0-16404 ft.)
Power supply mode AC built-in
Rated input voltage [V] AC input: 100–240 V AC; 50/60 Hz
Input voltage range [V] AC input: 90 V AC to 300 V AC; 47 Hz to 63 Hz
Maximum input current [A] 3 A
Memory 2 GB
Flash memory Physical space: 1 GB
Console port RJ45
Eth Management port Not supported
USB Not supported
RTC Not supported
RPS input Not supported
Service port surge protection [kV] Common mode: ±7 kV
Power supply surge protection [kV] Differential mode: ±6 kV; common mode: ±6 kV
Ingress protection level (dustproof/waterproof) IP20
Types of fans None
Heat dissipation mode Natural heat dissipation
Airflow direction -
PoE Supported
Certification

EMC certification

Safety certification

Manufacturing certification