WLAN Hardware Installation and Maintenance Guide
AirEngine 6776-X6ETH
Overview
| Item | Details |
|---|---|
| Description | AirEngine6776-X6ETH(11be indoor,2+4+2 tri bands,external antenna,USB,BLE) |
| Part Number | 50087978 |
| Model | AirEngine 6776-X6ETH |
| First supported version | V600R024C10 |
Appearance
Ports
1 |
GE |
2 |
SFP+/PoE_IN |
3 |
5GE/PoE_IN |
4 |
DC 48V |
5 |
PoE_IN |
6 |
2.4G/6G_A~B 2.4G&5G_D~E |
7 |
USB |
8 |
Security slot |
9 |
5G_C |
10 |
5G_F |
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| SFP+/PoE_IN | SFP+ | Ethernet optical port that supports 1G/2.5G/10G auto-sensing, supports PoE input, and works with a matching optical module. When the PSE supplies power to the AP through this port, the hybrid cable and hybrid module must be used. |
Optical module |
| PoE_IN | Phoenix terminal block | Supplies power to the device over the DC power cable in a hybrid cable when a PSE supplies power to the AP through this port. | Phoenix terminal block |
| 5GE/PoE_IN | RJ45 | Ethernet electrical port that supports 100M/1000M/2.5G/5G auto-sensing, connects to the wired Ethernet, and supports PoE input | Network cable |
| GE | RJ45 | Ethernet electrical port that supports 10/100/1000M auto-sensing and connects to the wired Ethernet. | Network cable |
| DC 48V | DC connector | DC power port, used to connect to a 48 V power adapter. | 48 V power adapter (Do not use this component in regions with ERP requirements.) |
| USB | USB 2.0 Type A | Connects to an IoT terminal to implement IoT applications. | IoT module |
| 2.4G/6G_A and 2.4G/6G_B | RP-SMA-K (outside threads, inner pin) | Connects to a 2.4 GHz or 6 GHz antenna for transmitting and receiving service signals. | Antenna |
| 5G_C | RP-SMA-K (outside threads, inner pin) | Connects to a 5 GHz antenna for transmitting and receiving service signals. | Antenna |
| 2.4G&5G_D and 2.4G&5G_E | RP-SMA-K (outside threads, inner pin) | Connects to a dual-band (2.4 GHz + 5 GHz) antenna for transmitting and receiving service signals. | Antenna |
| 5G_F | RP-SMA-K (outside threads, inner pin) | Connects to a 5 GHz antenna for transmitting and receiving service signals. | Antenna |
Indicators and Buttons
1 |
Indicator |
2 |
Default |
| Silkscreen | Name | Color | Status | Description |
|---|---|---|---|---|
| - | System indicator | - | Off | The system is not running. |
| Green | Steady on |
|
||
| Green | Steady on after blinking once | After the hardware reset is cleared and the software starts, the indicator blinks once. Then, the indicator is steady on until the bottom-layer system starts. | ||
| Green | Slow blinking (0.2 Hz) | The AP is running properly, the Ethernet connection is normal, and no STA is associated with the AP. | ||
| Green | Slow blinking (0.5 Hz) | The AP is running properly, the Ethernet connection is normal, and STAs are associated with the AP. | ||
| Green | Blinking once every 0.25s (4 Hz) |
|
||
| Yellow (blinking red and green at the same time, causing color deviation) | Blinking once every 0.25s (4 Hz) | Hold down the Default button for more than 6 seconds to restore the factory settings. | ||
| Red | Steady on | The system is faulty. |
| Silkscreen | Name | Description |
|---|---|---|
| Default | Reset button | If you press the button, the device resets. If you hold down the button for more than 6 seconds, the indicator blinks yellow (blinking red and green fast at the same time, causing color deviation), and the device restores the factory settings, switches to the Fit mode, and restarts. |
Technical Specifications
| Item | Specification |
|---|---|
| Installation Type |
|
| Dimensions without packaging (H x W x D) [mm(in.)] | 57 mm x 220 mm x 220 mm (2.24 in. x 8.66 in. x 8.66 in.) |
| Dimensions with packaging (H x W x D) [mm(in.)] | 265 mm x 275 mm x 85 mm |
| Weight without packaging [kg(lb)] | 1.425 kg (3.14 lb) |
| Weight with packaging [kg(lb)] | 1.934 kg (4.26 lb) |
| Storage | NAND Flash 512 MB |
| Console port | Bluetooth console |
| Maximum power consumption [W] | 25.5 (excluding USB) |
| Maximum heat dissipation [BTU/hour] | 87.01 BTU/hour |
| Power supply mode |
|
| Rated input voltage [V] | DC: 48 V PoE: 802.3bt/at/af |
| Input voltage range [V] | DC: 43.2 V to 57.6 V PoE: 802.3bt/at/af When multiple PoE power inputs are used, if the power supply levels are different, the port with the highest power supply level is used. If the power supply levels are the same, power supply backup can be implemented. |
| Service port surge protection | PoE port: Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B Common mode (8 wires to ground): 4 kV (1.2/50 us, 42 ohms), criterion B |
| PoE OUT | Not supported |
| Types of fans | None |
| Maximum number of physical ports on the entire device | 10GE optical (SFP+) x 1, GE/2.5GE/10GE auto-sensing 5GE (RJ45) x 1, 100M/1000M/2500M/5000M auto-sensing GE (RJ45) x 1, 10M/100M/1000M auto-sensing |
| Long-term operating temperature [°C(°F)] | –10°C to +50°C (14°F to 122°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum ambient temperature decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.) |
| Storage temperature [°C(°F)] | –40°C to +70°C (–40°F to +158°F) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH, non-condensing |
| Long-term operating altitude [m(ft.)] | –60 m to +5000 m (–196.85 ft to +16404.20 ft) |
| Atmospheric pressure [kPa] | 53kPa - 106kPa ETSI 300 019-2-3 |
| Ground | Floating ground |
| USB | USB 2.0, power supply: 2.5 W/5 W |
| IoT slot | Not supported |
| BLE | BLE5.4 |
| Radio number | 3 |
| Operating frequency band |
|
| MIMO spatial streams | Triple-radio mode: Radio 0 (2.4 GHz): 2x2 Radio 1 (5 GHz): 4x4 Radio 2 (6 GHz): 2x2 Dual-radio mode: Radio 0 (2.4 GHz): 4x4 Radio 1 (5 GHz): 4x4 |
| Wi-Fi standard | 2.4 GHz: 802.11b/g/n/ax/be 5 GHz: 802.11a/n/ac/ac Wave 2/ax/be 6 GHz: 802.11a/ax/be |
| Radio interface | External antenna |
| Antenna gain | BLE: 4 dBi |
| Maximum transmit power | Triple-radio mode: 2.4 GHz (2x2): 23 dBm (combined power) 5 GHz (4x4): 26 dBm (combined power) 6 GHz (2x2): 23 dBm (combined power) Dual-radio mode: 2.4 GHz (4x4): 26 dBm (combined power) 5 GHz (4x4): 26 dBm (combined power) BLE: < 10 dBm |
| Singal radio transmit power [dBm] | Mode 1: 2.4 GHz: –10 dBm to +20 dBm/chain 5 GHz: –10 dBm to +20 dBm/chain 6 GHz: –10 dBm to +20 dBm/chain Mode 2: 2.4 GHz: –10 dBm to +20 dBm/chain 5 GHz: –10 dBm to +20 dBm/chain |
| MTBF [year] | 95.5569935 year |
| MTTR [hour] | 2 hour |
| Frequency stability [ppm] | +/-20 |
| 802.3bt power supply description | The power supply mode is negotiated to 802.3bt, and no function is restricted. |
| 802.3at power supply description | When the power supply mode is negotiated to 802.3at and the USB port is idle, the device functions are not restricted. When the USB port supplies 2.5 W power, the radio mode is fixed at 2.4 GHz (2x2) + 5 GHz (4x4) or 2.4 GHz (2x2) + 5 GHz (2x2) + 6 GHz (2x2) and the radio transmit power decreases by 3 dB. When the USB port supplies 5 W power, only one of the 5G electrical port and the 10G optical port can work at the same time, the radio mode is fixed at 2.4 GHz (2x2) + 5 GHz (4x4) or 2.4 GHz (2x2) + 5 GHz (2x2) + 6 GHz (2x2), and the radio transmit power is reduced by 3 dB. |
| 802.3af power supply description | When the power supply mode is negotiated to 802.3af, the downlink port is shut down, only one of the 5G electrical port and the 10G optical port can work at the same time, the radio mode is fixed at 2.4 GHz (2x2), and the radio transmit power decreases by 3 dB. |
| DC power supply description | No function is limited. |