WLAN Hardware Installation and Maintenance Guide
AirEngine 6576-56TP
Overview
| Item | Details |
|---|---|
| Description | AirEngine6576-56TP(11be indoor,2+2+4 tri bands,smart antenna,USB,BLE,PSE) |
| Part Number | 50087139 |
| Model | AirEngine 6576-56TP |
| First supported version | V600R024C00 |
Appearance
Ports
1 |
GE/PoE_OUT |
2 |
5GE/PoE_IN |
3 |
DC 48V |
4 |
Security slot |
5 |
USB |
- |
- |
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| 5GE/PoE_IN | RJ45 | Ethernet electrical port that supports 100M/1000M/2.5G/5G auto-sensing, connects to the wired Ethernet, and supports PoE input. | Network cable |
| GE/PoE_OUT | RJ45 | Ethernet electrical port that supports 10M/100M/1000M auto-sensing, connects to the wired Ethernet, and supports PoE output with a maximum output capability of 15.4 W. | Network cable |
| DC 48V | DC connector | DC power port, used to connect to a 48 V power adapter. | 48 V DC power adapter (Do not use this component in regions with ERP requirements.) |
| USB | USB 3.0 Type A | Connects to an IoT terminal to implement IoT applications. (USB 2.0 is supported in V600R024C10 and later versions. USB 3.0 is unavailable and will be supported through software upgrade in the future.) |
IoT module |
Indicators and Buttons
1 |
Indicator |
2 |
Default |
| Silkscreen | Name | Color | Status | Description |
|---|---|---|---|---|
| - | System indicator | - | Off | The system is not running. |
| Green | Steady on |
|
||
| Green | Slow blinking (0.5 Hz) | The AP is running properly, the Ethernet connection is normal, and STAs are associated with the AP. | ||
| Green | Slow blinking (0.2 Hz) | The AP is running properly, and the Ethernet connection is normal. | ||
| Green | Blinking once every 0.25s (4 Hz) |
|
||
| Yellow (blinking red and green at the same time, causing color deviation) | Blinking once every 0.25s (4 Hz) | Hold down the Default button for more than 6 seconds to restore the factory settings. This function is supported in V600R024C10 and later versions. |
||
| Red | Steady on | The system is faulty. |
| Silkscreen | Name | Description |
|---|---|---|
| Default | Reset button |
|
Technical Specifications
| Item | Specification |
|---|---|
| Installation Type |
|
| Dimensions without packaging (H x W x D) [mm(in.)] | Diameter x depth: 220 mm x 45 mm (8.66 in. x 1.77 in.) |
| Dimensions with packaging (H x W x D) [mm(in.)] | 72 mm x 260 mm x 255 mm (2.83 in. x 10.24 in. x 10.04 in.) |
| Weight without packaging [kg(lb)] | 0.740 kg (1.63 lb) |
| Weight with packaging [kg(lb)] | 1.225 kg (2.7 lb) |
| Storage | NAND Flash 512 MB |
| Console port | BLE console |
| Maximum power consumption [W] | 22.3 (excluding USB and PoE out) |
| Maximum heat dissipation [BTU/hour] | 70 BTU/hour |
| Power supply mode |
|
| Rated input voltage [V] | 48 V |
| Input voltage range [V] | DC: 48–57.6 V PoE: 802.3bt/at |
| Service port surge protection | PoE port: Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B Common mode (8 wires to ground): 4 kV (1.2/50 us, 42 ohms), criterion B |
| PoE OUT | Supported |
| Maximum PoE output power [W] | The GE port supports PoE output, with a maximum output power value of 15.4 W and a maximum transmission distance of 40 m. |
| Maximum number of physical ports on the entire device | 5GE (RJ45) x 1, 100M/1000M/2500M/5000M auto-sensing GE (RJ45) x 1, 10M/100M/1000M auto-sensing |
| Long-term operating temperature [°C(°F)] | –10°C to +50°C (14°F to 122°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum ambient temperature decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.) |
| Storage temperature [°C(°F)] | –40°C to +70°C (–40°F to +158°F) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH (non-condensing) |
| Long-term operating altitude [m(ft.)] | –60 m to +5000 m (–196.85 ft to +16404.20 ft) |
| Atmospheric pressure [kPa] | 53kPa - 106kPa ETSI 300 019-2-3 |
| Ground | Floating ground |
| USB | The USB port can supply 2.5 W or 5 W power. USB 2.0 is supported in V600R024C10 and later versions. USB 3.0 is unavailable and will be supported through software upgrade in the future. |
| IoT slot | Not supported |
| BLE | BLE5.2 |
| Radio number | 3 |
| Operating frequency band |
|
| MIMO spatial streams | Radio 0 (2.4 GHz): 2x2 Radio 1 (5 GHz): 2x2 Radio 2 (5 GHz): 4x4 |
| Wi-Fi standard | 2.4 GHz: 802.11b/g/n/ax/be 5 GHz: 802.11a/n/ac/ac Wave 2/ax/be 5 GHz: 802.11a/n/ac/ac Wave 2/ax/be |
| Radio interface | Built-in smart antennas |
| Antenna gain | 2.4 GHz: 4 dBi/chain (peak gain) 2 dBi (combined gain) 5 GHz-1: 5 dBi/chain (peak gain) 3 dBi (combined gain) 5 GHz-2: 5 dBi/chain (peak gain) 3 dBi (combined gain) BT: 4 dBi |
| Maximum transmit power | 2.4 GHz: 20 dBm/chain 23 dBm (combined power) 5 GHz (2x2): 20 dBm/chain 23 dBm (combined power) 5 GHz (4x4): 20 dBm/chain 26 dBm (combined power) BLE: < 10 dBm |
| Singal radio transmit power [dBm] | 2.4 GHz: –10 dBm to +20 dBm/chain 5 GHz: –10 dBm to +20 dBm/chain 5 GHz: –10 dBm to +20 dBm/chain |
| MTBF [year] | 115.823 year |
| MTTR [hour] | 2 hour |
| Frequency stability [ppm] | +/-20 |
| 802.3bt power supply description | The power supply mode is negotiated to 802.3bt, and no function is restricted. |
| 802.3at power supply description | The power supply mode is negotiated to 802.3at. 1. The PoE OUT function is unavailable. 2. When the 5 W USB port is used, the maximum transmit power of radios 0, 1, and 2 decreases by 3 dBm. |
| 802.3af power supply description | The power supply mode is negotiated to 802.3af. Wi-Fi service: A maximum of 2.4 GHz (2x2) + 5 GHz (2x2) is supported. The USB and PoE OUT functions are unavailable. Other functions are not restricted. |
| DC power supply description | No function is limited. |