WLAN Hardware Installation and Maintenance Guide
AirEngine 8760-X1-PRO (02353GSG-001)
Overview
| Item | Details |
|---|---|
| Description | AirEngine8760-X1-PRO(11ax indoor,Dedicated 3rd Radio,4+12 dual bands,smart antenna,USB,IoT Slot,BLE) |
| Part Number | 02353GSG-001 |
| Model | AirEngine 8760-X1-PRO |
| First supported version | V200R021C10SPC100 |
Depending on the production batch, the device has multiple part numbers, which have the same software specifications but different minimum versions supported. Additionally, the hardware specifications, such as the weight and power consumption, are slightly different.
Appearance
Ports
1 |
Security slot |
2 |
10GE1/PoE_IN |
3 |
10GE0/PoE_IN |
4 |
USB |
5 |
SFP+ |
6 |
DC 48V |
7 |
IoT card slot |
8 |
RF port of the IoT antenna |
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| 10GE0/PoE_IN | RJ45 | Ethernet electrical port that supports 100M/1000M/2.5G/5G/10G auto-sensing, connects to the wired Ethernet, and supports PoE input. | Network cable |
| 10GE1/PoE_IN | RJ45 | Ethernet electrical port that supports 100M/1000M/2.5G/5G/10G auto-sensing, connects to the wired Ethernet, and supports PoE input. | Network cable |
| SFP+ | SFP+ | Ethernet optical port, supporting 1 Gbit/s or 10 Gbit/s auto-sensing and working with a matching optical module | Optical module |
| DC 48V | DC connector | DC power port, used to connect to a 48 V power adapter. | 48 V DC power adapter |
| IoT card slot | - | Connects to an IoT terminal to implement IoT applications. | IoT card |
| RF port of the IoT antenna | MCX | Connects an IoT card to the built-in IoT antenna of the AP. When installing an IoT card, you can use the built-in IoT antenna of the AP or an independent FPC antenna. |
RF jumper |
| USB | USB 2.0 Type A | Connects to an IoT terminal to implement IoT applications. | IoT module |
Indicators and Buttons
1 |
Indicator |
2 |
Default |
| Silkscreen | Name | Color | Status | Description |
|---|---|---|---|---|
| - | System indicator | - | Off | The system is not running. |
| White | Steady on |
|
||
| White | Steady on after blinking once | After the hardware reset is cleared and the software starts, the indicator blinks once. Then, the indicator is steady on until the bottom-layer system starts. | ||
| White | Slow blinking (0.5 Hz) | The AP is running properly, the Ethernet connection is normal, and STAs are associated with the AP. This state is supported in V200R022C00 and later versions. |
||
| White | Slow blinking (0.2 Hz) | The AP is running properly, and the Ethernet connection is normal. For V200R022C00 and later versions, this state also indicates that no STA is associated with the AP. |
||
| White | Blinking once every 0.25s (4 Hz) |
|
||
| Red (blinking red and white at the same time, causing color deviation) | Blinking once every 0.25s (4 Hz) | Hold down the Default button for more than 6 seconds to restore the factory settings. This function is supported in V200R024C00 and later versions. |
||
| Red | Steady on | The system is faulty. |
| Silkscreen | Name | Description |
|---|---|---|
| Default | Reset button |
|
Technical Specifications
| Item | Specification |
|---|---|
| Installation Type |
|
| Dimensions without packaging (H x W x D) [mm(in.)] | 61 mm x 220 mm x 220 mm (2.40 in. x 8.66 in. x 8.66 in.) |
| Weight without packaging [kg(lb)] | 1.85 kg (4.08 lb) |
| Storage | NAND Flash 512 MB; NOR Flash 16 MB |
| Console port | BLE console |
| Maximum power consumption [W] | 55.0 (excluding USB and IoT cards) |
| Maximum heat dissipation [BTU/hour] | 187.6 (without USB or IoT card) |
| Power supply mode |
|
| Rated input voltage [V] | 48 V |
| Input voltage range [V] | DC: 43.2 V to 57.6 V PoE: 802.3bt/at x 2 (When PoE power supply is used: If the power supply types of the two ports are different, the power supply in compliance with a later standard is used; if the power supply types of the two ports are the same, power supply backup is achieved.) |
| Service port surge protection | PoE port: Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B Common mode (8 wires to ground): 6 kV (1.2/50 us, 42 ohms), criterion B |
| PoE OUT | Not supported |
| Maximum number of physical ports on the entire device | 10GE (RJ45) x 2, 10M/100M/1000M/2.5GE/5GE/10GE auto-sensing 10GE optical port (SFP+), GE/10GE auto-sensing |
| Long-term operating temperature [°C(°F)] | –10°C to +50°C (14°F to 122°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum ambient temperature decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.) |
| Storage temperature [°C(°F)] | –40°C to +70°C (–40°F to +158°F) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH, non-condensing |
| Long-term operating altitude [m(ft.)] | –60 m to +5000 m (–196.85 ft to +16404.20 ft) |
| Atmospheric pressure [kPa] | 53kPa - 106kPa ETSI 300 019-2-3 |
| Ground | Grounding |
| USB | USB 2.0 |
| IoT slot | IoT card |
| BLE | BLE5.2 |
| Radio number | 2/3 |
| Operating frequency band |
|
| MIMO spatial streams | Triple-radio mode:
Dual-radio mode:
|
| Wi-Fi standard | 2.4 GHz: 802.11b/g/n/ax 5 GHz: 802.11a/n/ac/ac Wave 2/ax |
| Radio interface | Built-in smart antennas |
| Antenna gain | 2.4 GHz: 4 dBi 5 GHz: 5.5 dBi BLE: 4 dBi |
| Maximum transmit power | 2.4 GHz: 26 dBm 5 GHz: 31 dBm (Note: This is the total MIMO radio power, the same as: 2.4 GHz: 20 dBm/chain 5 GHz: 20 dBm/chain) BLE: < 10 dBm |
| Singal radio transmit power [dBm] | 2.4G: -10 dBm to 20 dBm/chain 5G: -10 dBm to 20 dBm/chain |
| MTBF [year] | 59.4 year |
| MTTR [hour] | 0.5 hour |
| Frequency stability [ppm] | +/-20 |
| 802.3bt power supply description | When the AP is powered by 802.3bt class 8, no function is restricted. If dual 802.3bt class 6 power supplies are used, Wi-Fi:
Wired network port: No function is restricted. Other ports: Both one USB port and two IoT card slots are available. If the USB port or IoT card slots are used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact your product manager. If single 802.3bt class 6 power supplies are used, Wi-Fi:
Wired network port: Two 10GE electrical ports and the SFP+ optical port work as combo ports. When one of them is working, the other two are unavailable. Other ports: Both one USB port and two IoT card slots are available. If the USB port or IoT card slots are used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact your product manager. |
| 802.3at power supply description | If dual 802.3at power supplies are used, Wi-Fi: If no USB port or IoT card slot is used, the radio power is self-adapted.
If the USB port or IoT card slots are used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact your product manager. Wired ports: The rate of both 10GE electrical ports is reduced to GE or lower, and the SFP+ optical port is unavailable. Other ports: The 2.5 W USB and IoT card is mutually exclusive. That is, when one of them is working, the other is unavailable. The IoT card takes precedence. If the USB port or IoT card slots are used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact your product manager. If single 802.3at power supply is used, Wi-Fi: If no USB port or IoT card slot is used, the radio power is self-adapted.
If the USB port or IoT card slots are used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact your product manager. Wired ports: The rate of both 10GE electrical ports is reduced to 1 Gbit/s or lower, and work with the SFP+ optical port as combo ports. When one of them is working, the other two are unavailable. Other ports: The 2.5 W USB and IoT card is mutually exclusive. That is, when one of them is working, the other is unavailable. The IoT card takes precedence. If the USB port or IoT card slots are used, Wi-Fi can work only in 2.4 GHz (2x2) + 5 GHz (2x2) mode. For details, contact your product manager. |
| DC power supply description | No function is limited. |