info-center max-logfile-number
Function
The info-center max-logfile-number command sets the maximum number of log files to be saved.
The undo info-center max-logfile-number command restores the default maximum number of log files to be saved.
By default, the AC6800V and AC6805 allow a maximum of 500 log files to be saved, and other models allow a maximum of 200 log files to be saved.
Parameters
| Parameter | Description | Value |
|---|---|---|
| filenumbers | Specifies the maximum number of log files that can be saved. | The value is an integer that ranges from 2 to 500. |
Usage Guidelines
Usage Scenario
If too many log files are saved on the AC, many disk space resources are occupied. To view log files generated recently, run the info-center max-logfile-number command to set the maximum number of log files that can be saved.
Precautions
If the number of log files generated on the AC exceeds the limit, the system deletes the oldest log file so that the number of log files is not larger than the maximum value.
